[Wed Dec 28 14:54:08 2011] Detection parameters:
  Position = (392.9, 350.0) = 5 34 7.03 22 3 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.0 +/- 24.8
  Background counts = 234.1
  Rate = 0.04 +/- 0.004

[Wed Dec 28 14:54:13 2011] Off-axis axis estimate = 7.80'
[Thu Dec 29 11:51:42 2011] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 11:51:42 2011] Initial guess for spatial extent in simple fitting = 10.33"
[Thu Dec 29 11:51:42 2011] source mask rpix=2.4, npix_max = 33, mask sum = 18, frac = 0.545
[Thu Dec 29 11:51:42 2011] Giving source the simple spatial ID 50 for pass 0, mean size = 10.33"
[Fri Dec 30 09:22:47 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src50.ximg exists
[Fri Dec 30 09:22:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src50.csv
[Fri Dec 30 09:22:47 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src50_1.ximg exists
[Fri Dec 30 09:22:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src50.csv
[Fri Dec 30 09:22:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:22:52 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Fri Dec 30 09:22:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src50.csv
[Fri Dec 30 09:22:52 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Fri Dec 30 09:22:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src50.csv
[Fri Dec 30 09:22:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:24:16 2011] Warning, spatial fit 50 centroid is now closest to src. 74
[Fri Dec 30 09:24:17 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:24:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:24:17 2011] Assessing source extent using major
[Fri Dec 30 09:24:17 2011] Source does appear to be extended
[Fri Dec 30 09:24:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:24:17 2011] Source is confused with source 73
[Sat Dec 31 00:06:15 2011] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 00:06:16 2011] Initial guess for spatial extent in simple fitting = 10.33"
[Sat Dec 31 00:06:16 2011] source mask rpix=2.4, npix_max = 33, mask sum = 18, frac = 0.545
[Sat Dec 31 00:06:16 2011] Giving source the simple spatial ID 43 for pass 1, mean size = 10.33"
[Sat Dec 31 22:04:15 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src43.ximg exists
[Sat Dec 31 22:04:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src43.csv
[Sat Dec 31 22:04:15 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src43_1.ximg exists
[Sat Dec 31 22:04:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src43.csv
[Sat Dec 31 22:04:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 22:04:20 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sat Dec 31 22:04:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sat Dec 31 22:04:20 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sat Dec 31 22:04:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sat Dec 31 22:04:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 22:05:35 2011] Warning, spatial fit 43 centroid is now closest to src. 74
[Sat Dec 31 22:05:35 2011] Warning: source 76 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 70 at 10.649564 pixels away
[Sat Dec 31 22:05:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:05:36 2011] Assessing source extent using major
[Sat Dec 31 22:05:36 2011] Source does appear to be extended
[Sat Dec 31 22:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:48:21 2012] XMMSAS src. selection expression = ellipse(34132.721527, 30404.611694, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 04:48:21 2012] Writing source region out to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src70_src.reg
[Sun Jan  1 04:48:21 2012] Extracting stamp from image fullrun_mos2_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (355, 313) - (430, 388)
[Sun Jan  1 04:48:21 2012] XMMSAS bgd. selection expression = annulus(34132.721527, 30404.611694, 1087.500000, 2175.000000, X, Y) && !ellipse(34047.189758, 28185.787781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34058.218750, 28839.718842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34168.508667, 29940.539124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34095.200000, 30955.670000, 1717.984049, 1717.984049, 0.000000, X, Y) && !ellipse(30918.636000, 34199.442000, 1670.248048, 1670.248048, 0.000000, X, Y) && !ellipse(34775.979370, 29272.254974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34820.875916, 31172.401031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35174.435547, 29477.738312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35208.911102, 30749.738953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34443.314000, 31283.794000, 3359.376097, 3359.376097, 0.000000, X, Y) && !ellipse(34914.601105, 31867.251404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35740.840000, 32094.790000, 1764.424051, 1764.424051, 0.000000, X, Y) && !ellipse(35729.195953, 29147.731445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34924.799072, 32661.182159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35850.722000, 28062.982000, 904.112026, 904.112026, 0.000000, X, Y) && !ellipse(32821.390000, 34132.895000, 1756.312051, 1756.312051, 0.000000, X, Y) && !ellipse(35709.536000, 30196.530600, 1703.192049, 1703.192049, 0.000000, X, Y)
[Sun Jan  1 04:48:21 2012] Writing fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src70.gif
[Sun Jan  1 06:37:58 2012] Mean detx,y = (-6982.63, 3269.86) 
[Sun Jan  1 06:38:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 06:38:19 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 06:38:20 2012] Setting source spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sun Jan  1 06:38:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Sun Jan  1 10:13:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 10:13:25 2012] rmf not generated due to insufficient counts
[Sun Jan  1 13:13:51 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:51 2012] Error reading totcts from fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sun Jan  1 13:13:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:57 2012] Using photon index=1.80, rate=0.04, arf fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src70.arf
[Sun Jan  1 13:13:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:57 2012] Updating source flux to 8.8e-13
[Sun Jan  1 13:24:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting