[Wed Dec 28 14:54:07 2011] Detection parameters:
  Position = (226.6, 370.7) = 5 34 59.06 22 4 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.7 +/- 25.6
  Background counts = 278.6
  Rate = 0.02 +/- 0.004

[Wed Dec 28 14:54:14 2011] Off-axis axis estimate = 7.39'
[Thu Dec 29 11:51:43 2011] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 11:51:43 2011] Initial guess for spatial extent in simple fitting = 10.12"
[Thu Dec 29 11:51:43 2011] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.782
[Thu Dec 29 11:51:43 2011] Giving source the simple spatial ID 96 for pass 0, mean size = 10.12"
[Fri Dec 30 09:22:49 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src96.ximg exists
[Fri Dec 30 09:22:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src96.csv
[Fri Dec 30 09:22:49 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src96_1.ximg exists
[Fri Dec 30 09:22:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src96.csv
[Fri Dec 30 09:22:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:22:54 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Fri Dec 30 09:22:54 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Fri Dec 30 09:22:54 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src96 appears to have run properly
[Fri Dec 30 09:24:16 2011] Warning, spatial fit 96 centroid is now closest to src. 62
[Fri Dec 30 09:24:17 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:24:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:24:17 2011] Assessing source extent using major
[Fri Dec 30 09:24:17 2011] Source does appear to be extended
[Fri Dec 30 09:24:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:24:17 2011] Source is confused with source 62
[Sat Dec 31 00:06:16 2011] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 00:06:16 2011] Initial guess for spatial extent in simple fitting = 10.12"
[Sat Dec 31 00:06:16 2011] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.782
[Sat Dec 31 00:06:16 2011] Giving source the simple spatial ID 88 for pass 1, mean size = 10.12"
[Sat Dec 31 22:04:17 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src88.ximg exists
[Sat Dec 31 22:04:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src88.csv
[Sat Dec 31 22:04:17 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src88_1.ximg exists
[Sat Dec 31 22:04:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src88.csv
[Sat Dec 31 22:04:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 22:04:22 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src88.ximg exists
[Sat Dec 31 22:04:22 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src88_1.ximg exists
[Sat Dec 31 22:04:22 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src88 appears to have run properly
[Sat Dec 31 22:05:35 2011] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 22.047136 pixels away
[Sat Dec 31 22:05:35 2011] Source 58 is offset by 9.333849 and -1.817119 pixels which is larger than
2 X fitted extent = 9.306805 x 9.306805, not incorporating fit results
[Sat Dec 31 22:05:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:05:36 2011] Assessing source extent using major
[Sat Dec 31 22:05:36 2011] Source does appear to be extended
[Sat Dec 31 22:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:48:27 2012] XMMSAS src. selection expression = ellipse(19665.620880, 32198.559235, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 04:48:27 2012] Writing source region out to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src58_src.reg
[Sun Jan  1 04:48:27 2012] Extracting stamp from image fullrun_mos2_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (189, 333) - (264, 408)
[Sun Jan  1 04:48:27 2012] XMMSAS bgd. selection expression = annulus(19665.620880, 32198.559235, 1087.500000, 2175.000000, X, Y) && !ellipse(19975.238000, 31903.108000, 1619.384047, 1619.384047, 0.000000, X, Y) && !ellipse(20520.041168, 32329.006134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20492.921371, 30575.383179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20513.677063, 32834.542297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20605.429565, 31273.724915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20464.604156, 29613.373138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22214.260498, 34562.645111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20473.560898, 30030.295044, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 04:48:27 2012] Writing fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src58.gif
[Sun Jan  1 07:35:58 2012] Mean detx,y = (7730.04, 4279.54) 
[Sun Jan  1 07:36:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 07:36:21 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 07:36:22 2012] Setting source spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sun Jan  1 07:36:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Sun Jan  1 12:09:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 12:09:31 2012] rmf not generated due to insufficient counts
[Sun Jan  1 13:13:54 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:54 2012] Error reading totcts from fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sun Jan  1 13:14:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:14:00 2012] Using photon index=1.80, rate=0.0171, arf fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src58.arf
[Sun Jan  1 13:14:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:14:00 2012] Updating source flux to 3.7e-13
[Sun Jan  1 13:24:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting