[Wed Dec 28 14:54:07 2011] Detection parameters:
  Position = (381.3, 392.6) = 5 34 10.63 22 6 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.4 +/- 26.9
  Background counts = 203.9
  Rate = 0.02 +/- 0.002

[Wed Dec 28 14:54:14 2011] Off-axis axis estimate = 9.10'
[Thu Dec 29 11:51:43 2011] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 11:51:43 2011] Initial guess for spatial extent in simple fitting = 10.98"
[Thu Dec 29 11:51:43 2011] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.820
[Thu Dec 29 11:51:43 2011] Giving source the simple spatial ID 106 for pass 0, mean size = 10.98"
[Fri Dec 30 09:24:16 2011] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 11.738370 pixels away
[Fri Dec 30 09:24:17 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:24:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:24:17 2011] Assessing source extent using major
[Fri Dec 30 09:24:17 2011] Source does appear to be extended
[Fri Dec 30 09:24:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 00:06:16 2011] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 00:06:16 2011] Initial guess for spatial extent in simple fitting = 10.98"
[Sat Dec 31 00:06:16 2011] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.820
[Sat Dec 31 00:06:16 2011] Giving source the simple spatial ID 97 for pass 1, mean size = 10.98"
[Sat Dec 31 22:04:18 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src97.ximg exists
[Sat Dec 31 22:04:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src97.csv
[Sat Dec 31 22:04:18 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src97_1.ximg exists
[Sat Dec 31 22:04:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src97.csv
[Sat Dec 31 22:04:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 22:04:23 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src97.ximg exists
[Sat Dec 31 22:04:23 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src97_1.ximg exists
[Sat Dec 31 22:04:23 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src97 appears to have run properly
[Sat Dec 31 22:05:36 2011] Spatial fit model total counts = 2023.530000, observed total counts = 2102.000000
[Sat Dec 31 22:05:36 2011] Offset between fit and detection position for source 52 = 3.522432 pixels
[Sat Dec 31 22:05:36 2011] 1948.109000 total counts/ 197.579000 bgd. counts: snr = 124.537220
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 3.522432 pixels
  Position = (377.8, 392.9) = 5 34 11.73 22 6 20.7
  Extent = 22.0 (21.9-43.9)", rotation angle = 0
  Source counts = 1750.5 +/- 44.1
  Background counts = 197.6
  Rate = 0.2 +/- 0.004
[Sat Dec 31 22:05:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:05:36 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 22:05:36 2011] Source does appear to be extended
[Sat Dec 31 22:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 22:05:36 2011] Source is confused with source 47
[Sat Dec 31 22:05:36 2011] Source is confused with source 54
[Sun Jan  1 04:48:28 2012] Counts = 1750.530000, rescaling region sizes by 2.000000
[Sun Jan  1 04:48:28 2012] XMMSAS src. selection expression = ellipse(32821.390000, 34132.895000, 2634.468076, 2634.468076, 0.000000, X, Y)
[Sun Jan  1 04:48:28 2012] Writing source region out to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src52_src.reg
[Sun Jan  1 04:48:28 2012] Extracting stamp from image fullrun_mos2_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (226, 241) - (529, 544)
[Sun Jan  1 04:48:28 2012] XMMSAS bgd. selection expression = annulus(32821.390000, 34132.895000, 8781.560253, 17563.120505, X, Y) && !ellipse(29586.456451, 19880.107422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.896000, 34407.753200, 1604.072046, 1604.072046, 0.000000, X, Y) && !ellipse(27004.924000, 34247.861000, 1390.728040, 1390.728040, 0.000000, X, Y) && !ellipse(27848.647600, 35098.469000, 626.676818, 626.676818, 0.000000, X, Y) && !ellipse(28718.368073, 34351.535767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30162.370000, 34276.082000, 1648.104047, 1648.104047, 0.000000, X, Y) && !ellipse(27288.393188, 35125.853821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31540.149139, 34238.649231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24317.052000, 34484.404600, 1993.088057, 1993.088057, 0.000000, X, Y) && !ellipse(33980.630829, 26840.187073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28097.396545, 39882.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.034000, 36352.502000, 1687.904049, 1687.904049, 0.000000, X, Y) && !ellipse(27003.936000, 18461.692000, 829.896024, 829.896024, 0.000000, X, Y) && !ellipse(27963.214020, 37625.847992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.310000, 36262.661000, 2991.696086, 2783.144080, 159.261000, X, Y) && !ellipse(28125.999176, 40573.421692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28138.283997, 41447.144043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26612.372000, 19856.288000, 1676.216048, 209.527206, 91.143000, X, Y) && !ellipse(27983.856873, 38568.091339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.558472, 34450.138245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27183.830008, 35617.016200, 535.336015, 535.336015, 0.000000, X, Y) && !ellipse(27313.257538, 20277.452469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28044.845551, 39100.453918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34047.189758, 28185.787781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27407.726000, 19342.386000, 1005.272029, 1005.272029, 0.000000, X, Y) && !ellipse(33847.866089, 24904.145020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29288.214000, 20168.946000, 1499.512043, 1499.512043, 0.000000, X, Y) && !ellipse(27478.235748, 18741.701218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34058.218750, 28839.718842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27762.708862, 20320.303314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34168.508667, 29940.539124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27920.006073, 38145.965576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.139343, 42061.687744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27412.922028, 36875.175629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33741.765808, 24051.349609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28198.364655, 42749.836823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33962.518219, 26311.881378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34095.200000, 30955.670000, 1717.984049, 1717.984049, 0.000000, X, Y) && !ellipse(29785.494000, 20248.608000, 1499.512043, 1499.512043, 0.000000, X, Y) && !ellipse(28356.102000, 41224.396000, 861.032025, 861.032025, 0.000000, X, Y) && !ellipse(30918.636000, 34199.442000, 1670.248048, 1670.248048, 0.000000, X, Y) && !ellipse(30218.225983, 34820.371460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26206.818000, 20333.809000, 1398.496040, 1398.496040, 0.000000, X, Y) && !ellipse(24845.136993, 35190.530334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34132.721527, 30404.611694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27744.930786, 39510.756836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28426.149800, 43180.141000, 1117.944032, 1117.944032, 0.000000, X, Y) && !ellipse(28127.368000, 20288.974000, 860.664025, 860.664025, 0.000000, X, Y) && !ellipse(27679.240051, 19446.866379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32012.189453, 34150.993439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27438.479340, 37614.487122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.815000, 19621.022000, 892.400026, 892.400026, 0.000000, X, Y) && !ellipse(29658.213928, 34749.591034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27382.599000, 40057.254000, 1620.672047, 234.014407, 359.896144, X, Y) && !ellipse(26510.424469, 18993.959534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28239.071564, 44012.916565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25072.564148, 20311.937317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20217.271200, 26779.020000, 1278.664037, 1278.664037, 0.000000, X, Y) && !ellipse(27716.583038, 41964.508362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27238.998000, 38305.120000, 1091.352031, 1091.352031, 0.000000, X, Y) && !ellipse(34736.953094, 25537.064178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19975.238000, 31903.108000, 1619.384047, 1619.384047, 0.000000, X, Y) && !ellipse(29445.582600, 34307.111200, 1624.144047, 1624.144047, 0.000000, X, Y) && !ellipse(20108.427200, 27953.326000, 1446.703486, 1446.703486, 0.000000, X, Y) && !ellipse(28677.140000, 19403.536000, 1508.432043, 1508.432043, 0.000000, X, Y) && !ellipse(27550.951691, 38927.380524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20520.041168, 32329.006134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34775.979370, 29272.254974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34820.875916, 31172.401031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27994.819489, 43358.916473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25391.446000, 20325.505800, 1406.344040, 1406.344040, 0.000000, X, Y) && !ellipse(35174.435547, 29477.738312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35208.911102, 30749.738953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23826.126129, 34478.087738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24611.742000, 20490.516200, 1406.344040, 1406.344040, 0.000000, X, Y) && !ellipse(35432.995575, 26830.647552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33490.000000, 22661.569214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34443.314000, 31283.794000, 3359.376097, 3359.376097, 0.000000, X, Y) && !ellipse(20378.793610, 27431.215179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27286.327600, 39513.382200, 1216.864035, 392.766411, 0.000000, X, Y) && !ellipse(20492.921371, 30575.383179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34914.601105, 31867.251404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20513.677063, 32834.542297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35740.840000, 32094.790000, 1764.424051, 1764.424051, 0.000000, X, Y) && !ellipse(20605.429565, 31273.724915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27303.359589, 15947.995758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20464.604156, 29613.373138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35729.195953, 29147.731445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34909.665405, 23757.137848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19704.452011, 26935.035339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19665.620880, 32198.559235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30859.423523, 20096.877289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34924.799072, 32661.182159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27557.962000, 43830.328000, 977.248028, 977.248028, 0.000000, X, Y) && !ellipse(22214.260498, 34562.645111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33672.841248, 23151.374329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35850.722000, 28062.982000, 904.112026, 904.112026, 0.000000, X, Y) && !ellipse(23419.750400, 20563.768800, 1429.240041, 1429.240041, 0.000000, X, Y) && !ellipse(22876.080000, 20482.226000, 1459.008042, 1459.008042, 0.000000, X, Y) && !ellipse(20305.351517, 26314.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25253.595800, 19846.008600, 1437.400041, 1437.400041, 0.000000, X, Y) && !ellipse(20434.169556, 28720.003571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23123.074371, 34516.067932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35709.536000, 30196.530600, 1703.192049, 1703.192049, 0.000000, X, Y) && !ellipse(30623.516000, 20157.930200, 1537.592044, 1537.592044, 0.000000, X, Y) && !ellipse(20473.560898, 30030.295044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27062.224000, 15484.086000, 1699.480049, 1699.480049, 0.000000, X, Y)
[Sun Jan  1 04:48:28 2012] Writing fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src52.gif
[Sun Jan  1 07:53:40 2012] Mean detx,y = (-5257.18, 7543.33) 
[Sun Jan  1 07:53:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 08:00:14 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 08:00:14 2012] Setting source spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sun Jan  1 08:00:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sun Jan  1 13:13:54 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:54 2012] Error reading totcts from fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sun Jan  1 13:14:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:14:00 2012] Using photon index=1.80, rate=0.153, arf fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src52.arf
[Sun Jan  1 13:14:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:14:00 2012] Updating source flux to 2.7e-12
[Sun Jan  1 13:24:21 2012] Flag c found in src. 52 procflags, skipping spectral fitting