[Wed Dec 28 14:54:06 2011] Detection parameters:
  Position = (295.7, 396.5) = 5 34 37.44 22 6 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 398.1 +/- 29.6
  Background counts = 289.2
  Rate = 0.06 +/- 0.004

[Wed Dec 28 14:54:13 2011] Off-axis axis estimate = 7.12'
[Thu Dec 29 11:51:42 2011] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 11:51:42 2011] Initial guess for spatial extent in simple fitting = 9.99"
[Thu Dec 29 11:51:42 2011] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.800
[Thu Dec 29 11:51:42 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 9.99"
[Fri Dec 30 09:22:46 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src22.ximg exists
[Fri Dec 30 09:22:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src22.csv
[Fri Dec 30 09:22:46 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri Dec 30 09:22:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src22.csv
[Fri Dec 30 09:22:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:22:50 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri Dec 30 09:22:50 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Dec 30 09:22:50 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Fri Dec 30 09:24:16 2011] Warning, spatial fit 22 centroid is now closest to src. 40
[Fri Dec 30 09:24:16 2011] Source 48 is offset by 0.613963 and 2.520246 pixels which is larger than
2 X fitted extent = 12.159449 x 1.550308, not incorporating fit results
[Fri Dec 30 09:24:17 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:24:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:24:17 2011] Assessing source extent using major
[Fri Dec 30 09:24:17 2011] Source does appear to be extended
[Fri Dec 30 09:24:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:24:17 2011] Source is confused with source 49
[Sat Dec 31 00:06:13 2011] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 00:06:13 2011] Initial guess for spatial extent in simple fitting = 9.99"
[Sat Dec 31 00:06:13 2011] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.800
[Sat Dec 31 00:06:13 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 9.99"
[Sat Dec 31 22:04:15 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src21.ximg exists
[Sat Dec 31 22:04:15 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src21.csv
[Sat Dec 31 22:04:15 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Dec 31 22:04:15 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src21.csv
[Sat Dec 31 22:04:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 22:04:19 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Dec 31 22:04:19 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Dec 31 22:04:19 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Dec 31 22:05:35 2011] Warning, spatial fit 21 centroid is now closest to src. 40
[Sat Dec 31 22:05:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:05:36 2011] Assessing source extent using major
[Sat Dec 31 22:05:36 2011] Source does appear to be extended
[Sat Dec 31 22:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:48:18 2012] XMMSAS src. selection expression = ellipse(25675.558472, 34450.138245, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 04:48:18 2012] Writing source region out to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src48_src.reg
[Sun Jan  1 04:48:18 2012] Extracting stamp from image fullrun_mos2_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (258, 359) - (333, 434)
[Sun Jan  1 04:48:18 2012] XMMSAS bgd. selection expression = annulus(25675.558472, 34450.138245, 1087.500000, 2175.000000, X, Y) && !ellipse(28220.896000, 34407.753200, 1604.072046, 1604.072046, 0.000000, X, Y) && !ellipse(27004.924000, 34247.861000, 1390.728040, 1390.728040, 0.000000, X, Y) && !ellipse(27848.647600, 35098.469000, 626.676818, 626.676818, 0.000000, X, Y) && !ellipse(28718.368073, 34351.535767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27288.393188, 35125.853821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24317.052000, 34484.404600, 1993.088057, 1993.088057, 0.000000, X, Y) && !ellipse(27018.034000, 36352.502000, 1687.904049, 1687.904049, 0.000000, X, Y) && !ellipse(27768.310000, 36262.661000, 2991.696086, 2783.144080, 159.261000, X, Y) && !ellipse(27183.830008, 35617.016200, 535.336015, 535.336015, 0.000000, X, Y) && !ellipse(27412.922028, 36875.175629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24845.136993, 35190.530334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29445.582600, 34307.111200, 1624.144047, 1624.144047, 0.000000, X, Y) && !ellipse(23826.126129, 34478.087738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23123.074371, 34516.067932, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 04:48:18 2012] Writing fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src48.gif
[Sun Jan  1 05:56:37 2012] Mean detx,y = (1858.29, 6937.01) 
[Sun Jan  1 05:56:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 05:57:00 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 05:57:00 2012] Setting source spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Jan  1 05:57:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sun Jan  1 09:22:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 09:22:21 2012] rmf not generated due to insufficient counts
[Sun Jan  1 13:13:49 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:50 2012] Error reading totcts from fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Jan  1 13:13:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:56 2012] Using photon index=1.80, rate=0.0566, arf fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src48.arf
[Sun Jan  1 13:13:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:56 2012] Updating source flux to 1.1e-12
[Sun Jan  1 13:24:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting