[Wed Dec 28 14:54:03 2011] Detection parameters:
  Position = (323.5, 459.0) = 5 34 28.72 22 11 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 751.5 +/- 38.9
  Background counts = 127.3
  Rate = 0.07 +/- 0.003

[Wed Dec 28 14:54:13 2011] Off-axis axis estimate = 11.78'
[Thu Dec 29 11:51:42 2011] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 11:51:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 29 11:51:42 2011] Initial guess for spatial extent in simple fitting = 12.32"
[Thu Dec 29 11:51:42 2011] source mask rpix=2.8, npix_max = 44, mask sum = 40, frac = 0.901
[Thu Dec 29 11:51:42 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 12.32"
[Fri Dec 30 09:22:45 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src12.ximg exists
[Fri Dec 30 09:22:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src12.csv
[Fri Dec 30 09:22:45 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Dec 30 09:22:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src12.csv
[Fri Dec 30 09:22:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:22:50 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Dec 30 09:22:50 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Dec 30 09:22:50 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Dec 30 09:24:16 2011] Warning, spatial fit 12 centroid is now closest to src. 11
[Fri Dec 30 09:24:16 2011] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.191312 pixels away
[Fri Dec 30 09:24:16 2011] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.445043 pixels away
[Fri Dec 30 09:24:17 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:24:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:24:17 2011] Assessing source extent using major
[Fri Dec 30 09:24:17 2011] Source does appear to be extended
[Fri Dec 30 09:24:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:24:17 2011] Source is confused with source 31
[Fri Dec 30 09:24:17 2011] Source is confused with source 29
[Sat Dec 31 00:06:12 2011] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 00:06:12 2011] Initial guess for spatial extent in simple fitting = 12.32"
[Sat Dec 31 00:06:12 2011] source mask rpix=2.8, npix_max = 44, mask sum = 40, frac = 0.901
[Sat Dec 31 00:06:12 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 12.32"
[Sat Dec 31 22:04:14 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src11.ximg exists
[Sat Dec 31 22:04:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src11.csv
[Sat Dec 31 22:04:14 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Dec 31 22:04:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src11.csv
[Sat Dec 31 22:04:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 22:04:18 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Dec 31 22:04:18 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Dec 31 22:04:18 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Dec 31 22:05:35 2011] Warning, spatial fit 11 centroid is now closest to src. 12
[Sat Dec 31 22:05:35 2011] Source 4 is offset by -0.629991 and 4.463083 pixels which is larger than
2 X fitted extent = 1.352929 x 1.352929, not incorporating fit results
[Sat Dec 31 22:05:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:05:36 2011] Assessing source extent using major
[Sat Dec 31 22:05:36 2011] Source does appear to be extended
[Sat Dec 31 22:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:48:17 2012] XMMSAS src. selection expression = ellipse(28097.396545, 39882.328186, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 04:48:17 2012] Writing source region out to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src4_src.reg
[Sun Jan  1 04:48:17 2012] Extracting stamp from image fullrun_mos2_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (286, 421) - (361, 496)
[Sun Jan  1 04:48:17 2012] XMMSAS bgd. selection expression = annulus(28097.396545, 39882.328186, 1087.500000, 2175.000000, X, Y) && !ellipse(27018.034000, 36352.502000, 1687.904049, 1687.904049, 0.000000, X, Y) && !ellipse(27963.214020, 37625.847992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.310000, 36262.661000, 2991.696086, 2783.144080, 159.261000, X, Y) && !ellipse(28125.999176, 40573.421692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28138.283997, 41447.144043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27983.856873, 38568.091339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28044.845551, 39100.453918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27920.006073, 38145.965576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.139343, 42061.687744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27412.922028, 36875.175629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28198.364655, 42749.836823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28356.102000, 41224.396000, 861.032025, 861.032025, 0.000000, X, Y) && !ellipse(27744.930786, 39510.756836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27438.479340, 37614.487122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27382.599000, 40057.254000, 1620.672047, 234.014407, 359.896144, X, Y) && !ellipse(27716.583038, 41964.508362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27238.998000, 38305.120000, 1091.352031, 1091.352031, 0.000000, X, Y) && !ellipse(27550.951691, 38927.380524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27286.327600, 39513.382200, 1216.864035, 392.766411, 0.000000, X, Y)
[Sun Jan  1 04:48:17 2012] Writing fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src4.gif
[Sun Jan  1 05:28:07 2012] Mean detx,y = (-281.01, 12428.28) 
[Sun Jan  1 05:28:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 05:28:32 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 05:28:32 2012] Setting source spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jan  1 05:28:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jan  1 08:54:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 08:54:26 2012] rmf not generated due to insufficient counts
[Sun Jan  1 13:13:49 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:49 2012] Error reading totcts from fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jan  1 13:13:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:56 2012] Using photon index=1.80, rate=0.0653, arf fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src4.arf
[Sun Jan  1 13:13:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:56 2012] Updating source flux to 1.9e-12
[Sun Jan  1 13:24:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting