[Wed Dec 28 14:54:04 2011] Detection parameters:
  Position = (315.6, 424.4) = 5 34 31.19 22 8 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 527.2 +/- 34.4
  Background counts = 250.3
  Rate = 0.05 +/- 0.003

[Wed Dec 28 14:54:13 2011] Off-axis axis estimate = 9.22'
[Thu Dec 29 11:51:42 2011] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 11:51:42 2011] Initial guess for spatial extent in simple fitting = 11.04"
[Thu Dec 29 11:51:42 2011] source mask rpix=2.5, npix_max = 36, mask sum = 27, frac = 0.732
[Thu Dec 29 11:51:42 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 11.04"
[Fri Dec 30 09:22:46 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src37.ximg exists
[Fri Dec 30 09:22:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src37.csv
[Fri Dec 30 09:22:46 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Dec 30 09:22:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src37.csv
[Fri Dec 30 09:22:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:22:51 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Dec 30 09:22:51 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Dec 30 09:22:51 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Dec 30 09:24:16 2011] Warning, spatial fit 37 centroid is now closest to src. 37
[Fri Dec 30 09:24:17 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:24:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:24:17 2011] Assessing source extent using major
[Fri Dec 30 09:24:17 2011] Source does appear to be extended
[Fri Dec 30 09:24:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:24:17 2011] Source is confused with source 37
[Sat Dec 31 00:06:14 2011] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 00:06:14 2011] Initial guess for spatial extent in simple fitting = 11.04"
[Sat Dec 31 00:06:14 2011] source mask rpix=2.5, npix_max = 36, mask sum = 27, frac = 0.732
[Sat Dec 31 00:06:14 2011] Giving source the simple spatial ID 34 for pass 1, mean size = 11.04"
[Sat Dec 31 22:04:15 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src34.ximg exists
[Sat Dec 31 22:04:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src34.csv
[Sat Dec 31 22:04:15 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src34_1.ximg exists
[Sat Dec 31 22:04:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src34.csv
[Sat Dec 31 22:04:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 22:04:20 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sat Dec 31 22:04:20 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sat Dec 31 22:04:20 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Sat Dec 31 22:05:35 2011] Warning, spatial fit 34 centroid is now closest to src. 37
[Sat Dec 31 22:05:35 2011] Source 14 is offset by 2.759931 and 0.841582 pixels which is larger than
2 X fitted extent = 2.520754 x 2.520754, not incorporating fit results
[Sat Dec 31 22:05:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:05:36 2011] Assessing source extent using major
[Sat Dec 31 22:05:36 2011] Source does appear to be extended
[Sat Dec 31 22:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:48:20 2012] XMMSAS src. selection expression = ellipse(27412.922028, 36875.175629, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 04:48:20 2012] Writing source region out to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src14_src.reg
[Sun Jan  1 04:48:20 2012] Extracting stamp from image fullrun_mos2_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (278, 387) - (353, 462)
[Sun Jan  1 04:48:20 2012] XMMSAS bgd. selection expression = annulus(27412.922028, 36875.175629, 1087.500000, 2175.000000, X, Y) && !ellipse(28220.896000, 34407.753200, 1604.072046, 1604.072046, 0.000000, X, Y) && !ellipse(27004.924000, 34247.861000, 1390.728040, 1390.728040, 0.000000, X, Y) && !ellipse(27848.647600, 35098.469000, 626.676818, 626.676818, 0.000000, X, Y) && !ellipse(28718.368073, 34351.535767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30162.370000, 34276.082000, 1648.104047, 1648.104047, 0.000000, X, Y) && !ellipse(27288.393188, 35125.853821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24317.052000, 34484.404600, 1993.088057, 1993.088057, 0.000000, X, Y) && !ellipse(28097.396545, 39882.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.034000, 36352.502000, 1687.904049, 1687.904049, 0.000000, X, Y) && !ellipse(27963.214020, 37625.847992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.310000, 36262.661000, 2991.696086, 2783.144080, 159.261000, X, Y) && !ellipse(27983.856873, 38568.091339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.558472, 34450.138245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27183.830008, 35617.016200, 535.336015, 535.336015, 0.000000, X, Y) && !ellipse(28044.845551, 39100.453918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27920.006073, 38145.965576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30918.636000, 34199.442000, 1670.248048, 1670.248048, 0.000000, X, Y) && !ellipse(30218.225983, 34820.371460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24845.136993, 35190.530334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27744.930786, 39510.756836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27438.479340, 37614.487122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29658.213928, 34749.591034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27382.599000, 40057.254000, 1620.672047, 234.014407, 359.896144, X, Y) && !ellipse(27238.998000, 38305.120000, 1091.352031, 1091.352031, 0.000000, X, Y) && !ellipse(29445.582600, 34307.111200, 1624.144047, 1624.144047, 0.000000, X, Y) && !ellipse(27550.951691, 38927.380524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27286.327600, 39513.382200, 1216.864035, 392.766411, 0.000000, X, Y)
[Sun Jan  1 04:48:20 2012] Writing fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src14.gif
[Sun Jan  1 06:11:02 2012] Mean detx,y = (234.35, 9376.24) 
[Sun Jan  1 06:11:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 06:11:25 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 06:11:25 2012] Setting source spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jan  1 06:11:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Jan  1 09:40:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 09:40:14 2012] rmf not generated due to insufficient counts
[Sun Jan  1 13:13:50 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:50 2012] Error reading totcts from fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jan  1 13:13:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:57 2012] Using photon index=1.80, rate=0.0458, arf fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src14.arf
[Sun Jan  1 13:13:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:57 2012] Updating source flux to 1.5e-12
[Sun Jan  1 13:24:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting