[Wed Dec 28 14:54:12 2011] Detection parameters:
  Position = (318.7, 224.1) = 5 34 30.24 21 54 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 274.7 +/- 28.6
  Background counts = 393.4
  Rate = 0.04 +/- 0.004

[Wed Dec 28 14:54:13 2011] Off-axis axis estimate = 5.59'
[Thu Dec 29 11:51:42 2011] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 11:51:42 2011] Initial guess for spatial extent in simple fitting = 9.22"
[Thu Dec 29 11:51:42 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.910
[Thu Dec 29 11:51:42 2011] Giving source the simple spatial ID 54 for pass 0, mean size = 9.22"
[Fri Dec 30 09:22:47 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src54.ximg exists
[Fri Dec 30 09:22:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src54.csv
[Fri Dec 30 09:22:47 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src54_1.ximg exists
[Fri Dec 30 09:22:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src54.csv
[Fri Dec 30 09:22:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:22:52 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Fri Dec 30 09:22:52 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Fri Dec 30 09:22:52 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Fri Dec 30 09:24:16 2011] Warning, spatial fit 54 centroid is now closest to src. 109
[Fri Dec 30 09:24:17 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:24:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:24:17 2011] Assessing source extent using major
[Fri Dec 30 09:24:17 2011] Source does appear to be extended
[Fri Dec 30 09:24:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:24:17 2011] Source is confused with source 113
[Fri Dec 30 09:24:17 2011] Source is confused with source 119
[Fri Dec 30 09:24:17 2011] Source is confused with source 120
[Sat Dec 31 00:06:16 2011] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 00:06:16 2011] Initial guess for spatial extent in simple fitting = 9.22"
[Sat Dec 31 00:06:16 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.910
[Sat Dec 31 00:06:16 2011] Giving source the simple spatial ID 47 for pass 1, mean size = 9.22"
[Sat Dec 31 22:04:16 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src47.ximg exists
[Sat Dec 31 22:04:16 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src47_1.ximg exists
[Sat Dec 31 22:04:16 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src47 appears to have run properly
[Sat Dec 31 22:04:20 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sat Dec 31 22:04:20 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sat Dec 31 22:04:20 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Sat Dec 31 22:05:35 2011] Source 118 is offset by -3.427241 and -1.778432 pixels which is larger than
2 X fitted extent = 1.017113 x 1.017113, not incorporating fit results
[Sat Dec 31 22:05:35 2011] Warning, spatial fit 47 centroid is now closest to src. 121
[Sat Dec 31 22:05:35 2011] Source 118 is offset by 7.095909 and -1.352317 pixels which is larger than
2 X fitted extent = 1.671540 x 1.671540, not incorporating fit results
[Sat Dec 31 22:05:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:05:36 2011] Assessing source extent using major
[Sat Dec 31 22:05:36 2011] Source does appear to be extended
[Sat Dec 31 22:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:48:22 2012] XMMSAS src. selection expression = ellipse(27679.240051, 19446.866379, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 04:48:22 2012] Writing source region out to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src118_src.reg
[Sun Jan  1 04:48:22 2012] Extracting stamp from image fullrun_mos2_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (281, 187) - (356, 262)
[Sun Jan  1 04:48:22 2012] XMMSAS bgd. selection expression = annulus(27679.240051, 19446.866379, 1087.500000, 2175.000000, X, Y) && !ellipse(29586.456451, 19880.107422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27003.936000, 18461.692000, 829.896024, 829.896024, 0.000000, X, Y) && !ellipse(26612.372000, 19856.288000, 1676.216048, 209.527206, 91.143000, X, Y) && !ellipse(27313.257538, 20277.452469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27407.726000, 19342.386000, 1005.272029, 1005.272029, 0.000000, X, Y) && !ellipse(29288.214000, 20168.946000, 1499.512043, 1499.512043, 0.000000, X, Y) && !ellipse(27478.235748, 18741.701218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27762.708862, 20320.303314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29785.494000, 20248.608000, 1499.512043, 1499.512043, 0.000000, X, Y) && !ellipse(26206.818000, 20333.809000, 1398.496040, 1398.496040, 0.000000, X, Y) && !ellipse(28127.368000, 20288.974000, 860.664025, 860.664025, 0.000000, X, Y) && !ellipse(26329.815000, 19621.022000, 892.400026, 892.400026, 0.000000, X, Y) && !ellipse(26510.424469, 18993.959534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25072.564148, 20311.937317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28677.140000, 19403.536000, 1508.432043, 1508.432043, 0.000000, X, Y) && !ellipse(25391.446000, 20325.505800, 1406.344040, 1406.344040, 0.000000, X, Y) && !ellipse(24611.742000, 20490.516200, 1406.344040, 1406.344040, 0.000000, X, Y) && !ellipse(25253.595800, 19846.008600, 1437.400041, 1437.400041, 0.000000, X, Y) && !ellipse(30623.516000, 20157.930200, 1537.592044, 1537.592044, 0.000000, X, Y)
[Sun Jan  1 04:48:22 2012] Writing fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src118.gif
[Sun Jan  1 06:40:39 2012] Mean detx,y = (-877.44, -7976.36) 
[Sun Jan  1 06:40:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 06:40:58 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 06:40:58 2012] Setting source spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src118_src_b10.pi.gz
[Sun Jan  1 06:40:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src118_bgd.pi.gz
[Sun Jan  1 10:26:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 10:26:20 2012] rmf not generated due to insufficient counts
[Sun Jan  1 13:13:51 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:51 2012] Error reading totcts from fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src118_src_b10.pi.gz
[Sun Jan  1 13:13:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:57 2012] Using photon index=1.80, rate=0.0362, arf fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src118.arf
[Sun Jan  1 13:13:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:57 2012] Updating source flux to 6e-13
[Sun Jan  1 13:24:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting