[Wed Dec 28 14:54:12 2011] Detection parameters:
  Position = (355.3, 231.6) = 5 34 18.82 21 54 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.7 +/- 28.6
  Background counts = 387.9
  Rate = 0.02 +/- 0.003

[Wed Dec 28 14:54:14 2011] Off-axis axis estimate = 6.36'
[Thu Dec 29 11:51:43 2011] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 11:51:43 2011] Initial guess for spatial extent in simple fitting = 9.61"
[Thu Dec 29 11:51:43 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.852
[Thu Dec 29 11:51:43 2011] Giving source the simple spatial ID 97 for pass 0, mean size = 9.61"
[Fri Dec 30 09:22:49 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src97.ximg exists
[Fri Dec 30 09:22:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src97.csv
[Fri Dec 30 09:22:49 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src97_1.ximg exists
[Fri Dec 30 09:22:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src97.csv
[Fri Dec 30 09:22:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:22:54 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Fri Dec 30 09:22:54 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Fri Dec 30 09:22:54 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src97 appears to have run properly
[Fri Dec 30 09:24:16 2011] Warning, spatial fit 97 centroid is now closest to src. 105
[Fri Dec 30 09:24:17 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:24:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:24:17 2011] Assessing source extent using major
[Fri Dec 30 09:24:17 2011] Source does appear to be extended
[Fri Dec 30 09:24:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:24:17 2011] Source is confused with source 105
[Sat Dec 31 00:06:16 2011] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 00:06:16 2011] Initial guess for spatial extent in simple fitting = 9.61"
[Sat Dec 31 00:06:16 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.852
[Sat Dec 31 00:06:16 2011] Giving source the simple spatial ID 89 for pass 1, mean size = 9.61"
[Sat Dec 31 22:04:17 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src89.ximg exists
[Sat Dec 31 22:04:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src89.csv
[Sat Dec 31 22:04:17 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src89_1.ximg exists
[Sat Dec 31 22:04:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src89.csv
[Sat Dec 31 22:04:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 22:04:22 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src89.ximg exists
[Sat Dec 31 22:04:22 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src89_1.ximg exists
[Sat Dec 31 22:04:22 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src89 appears to have run properly
[Sat Dec 31 22:05:35 2011] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 111 at 15.825237 pixels away
[Sat Dec 31 22:05:35 2011] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 111 at 19.784988 pixels away
[Sat Dec 31 22:05:35 2011] Warning, spatial fit 89 centroid is now closest to src. 105
[Sat Dec 31 22:05:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:05:36 2011] Assessing source extent using major
[Sat Dec 31 22:05:36 2011] Source does appear to be extended
[Sat Dec 31 22:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:48:27 2012] XMMSAS src. selection expression = ellipse(30859.423523, 20096.877289, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 04:48:27 2012] Writing source region out to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src111_src.reg
[Sun Jan  1 04:48:27 2012] Extracting stamp from image fullrun_mos2_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (318, 194) - (393, 269)
[Sun Jan  1 04:48:27 2012] XMMSAS bgd. selection expression = annulus(30859.423523, 20096.877289, 1087.500000, 2175.000000, X, Y) && !ellipse(29586.456451, 19880.107422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29288.214000, 20168.946000, 1499.512043, 1499.512043, 0.000000, X, Y) && !ellipse(29785.494000, 20248.608000, 1499.512043, 1499.512043, 0.000000, X, Y) && !ellipse(28127.368000, 20288.974000, 860.664025, 860.664025, 0.000000, X, Y) && !ellipse(28677.140000, 19403.536000, 1508.432043, 1508.432043, 0.000000, X, Y) && !ellipse(33490.000000, 22661.569214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30623.516000, 20157.930200, 1537.592044, 1537.592044, 0.000000, X, Y)
[Sun Jan  1 04:48:27 2012] Writing fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src111.gif
[Sun Jan  1 07:36:34 2012] Mean detx,y = (-4034.87, -7258.63) 
[Sun Jan  1 07:36:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 07:37:01 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 07:37:02 2012] Setting source spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src111_src_b10.pi.gz
[Sun Jan  1 07:37:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src111_bgd.pi.gz
[Sun Jan  1 12:09:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 12:09:37 2012] rmf not generated due to insufficient counts
[Sun Jan  1 13:13:54 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:54 2012] Error reading totcts from fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src111_src_b10.pi.gz
[Sun Jan  1 13:14:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:14:00 2012] Using photon index=1.80, rate=0.017, arf fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src111.arf
[Sun Jan  1 13:14:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:14:00 2012] Updating source flux to 3e-13
[Sun Jan  1 13:24:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting