[Wed Dec 28 14:54:12 2011] Detection parameters:
  Position = (298.3, 234.7) = 5 34 36.62 21 55 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 268.1 +/- 31.2
  Background counts = 404.4
  Rate = 0.04 +/- 0.005

[Wed Dec 28 14:54:13 2011] Off-axis axis estimate = 4.62'
[Thu Dec 29 11:51:42 2011] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 11:51:42 2011] Initial guess for spatial extent in simple fitting = 8.74"
[Thu Dec 29 11:51:42 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.993
[Thu Dec 29 11:51:42 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 8.74"
[Fri Dec 30 09:22:46 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src47.ximg exists
[Fri Dec 30 09:22:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src47.csv
[Fri Dec 30 09:22:47 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src47_1.ximg exists
[Fri Dec 30 09:22:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src47.csv
[Fri Dec 30 09:22:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:22:52 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Fri Dec 30 09:22:52 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Dec 30 09:22:52 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Dec 30 09:24:16 2011] Spatial fit model total counts = 5118.240000, observed total counts = 5127.000000
[Fri Dec 30 09:24:16 2011] Offset between fit and detection position for source 110 = 3.415952 pixels
[Fri Dec 30 09:24:16 2011] Warning, changing simple spatial fit ID from 47 to 19
[Fri Dec 30 09:24:16 2011] 4645.480000 total counts/ 2439.880000 bgd. counts: snr = 44.652165
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 3.415952 pixels
  Position = (301.7, 234.1) = 5 34 35.57 21 54 49.8
  Extent = 17.8 (17.7-35.5)", rotation angle = 0
  Source counts = 2205.6 +/- 68.2
  Background counts = 2439.9
  Rate = 0.2 +/- 0.006
[Fri Dec 30 09:24:16 2011] Spatial fit model total counts = 4324.710000, observed total counts = 4582.000000
[Fri Dec 30 09:24:16 2011] Offset between fit and detection position for source 110 = 0.252300 pixels
[Fri Dec 30 09:24:16 2011] Warning, changing simple spatial fit ID from 19 to 47
[Fri Dec 30 09:24:16 2011] 3095.768000 total counts/ 483.508000 bgd. counts: snr = 118.799488
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 0.252300 pixels
  Position = (301.8, 234.3) = 5 34 35.53 21 54 50.8
  Extent = 17.5 (17.3-35.0)", rotation angle = 0
  Source counts = 2612.3 +/- 55.6
  Background counts = 483.5
  Rate = 0.2 +/- 0.005
[Fri Dec 30 09:24:17 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:24:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:24:17 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 09:24:17 2011] Source does appear to be extended
[Fri Dec 30 09:24:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:24:17 2011] Source is confused with source 113
[Fri Dec 30 09:24:17 2011] Source is confused with source 114
[Fri Dec 30 09:24:17 2011] Source is confused with source 102
[Fri Dec 30 09:24:17 2011] Source is confused with source 115
[Sat Dec 31 00:06:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 00:06:15 2011] Initial guess for spatial extent in simple fitting = 17.48"
[Sat Dec 31 00:06:15 2011] source mask rpix=4.0, npix_max = 81, mask sum = 72, frac = 0.882
[Sat Dec 31 00:06:15 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 17.48"
[Sat Dec 31 22:04:15 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src41.ximg exists
[Sat Dec 31 22:04:15 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Dec 31 22:04:15 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src41 appears to have run properly
[Sat Dec 31 22:04:20 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Dec 31 22:04:20 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Dec 31 22:04:20 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Sat Dec 31 22:05:35 2011] Warning, spatial fit 41 centroid is now closest to src. 116
[Sat Dec 31 22:05:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:05:36 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 22:05:36 2011] Source does appear to be extended
[Sat Dec 31 22:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:48:21 2012] Counts = 2612.260000, rescaling region sizes by 2.000000
[Sun Jan  1 04:48:21 2012] XMMSAS src. selection expression = ellipse(26206.818000, 20333.809000, 2097.744060, 2097.744060, 0.000000, X, Y)
[Sun Jan  1 04:48:21 2012] Writing source region out to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src110_src.reg
[Sun Jan  1 04:48:21 2012] Extracting stamp from image fullrun_mos2_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (181, 114) - (422, 355)
[Sun Jan  1 04:48:21 2012] XMMSAS bgd. selection expression = annulus(26206.818000, 20333.809000, 6992.480201, 13984.960402, X, Y) && !ellipse(29586.456451, 19880.107422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.896000, 34407.753200, 1604.072046, 1604.072046, 0.000000, X, Y) && !ellipse(27004.924000, 34247.861000, 1390.728040, 1390.728040, 0.000000, X, Y) && !ellipse(28718.368073, 34351.535767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30162.370000, 34276.082000, 1648.104047, 1648.104047, 0.000000, X, Y) && !ellipse(27288.393188, 35125.853821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31540.149139, 34238.649231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24317.052000, 34484.404600, 1993.088057, 1993.088057, 0.000000, X, Y) && !ellipse(33980.630829, 26840.187073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27003.936000, 18461.692000, 829.896024, 829.896024, 0.000000, X, Y) && !ellipse(27768.310000, 36262.661000, 2991.696086, 2783.144080, 159.261000, X, Y) && !ellipse(26612.372000, 19856.288000, 1676.216048, 209.527206, 91.143000, X, Y) && !ellipse(25675.558472, 34450.138245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27313.257538, 20277.452469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34047.189758, 28185.787781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27407.726000, 19342.386000, 1005.272029, 1005.272029, 0.000000, X, Y) && !ellipse(33847.866089, 24904.145020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29288.214000, 20168.946000, 1499.512043, 1499.512043, 0.000000, X, Y) && !ellipse(27478.235748, 18741.701218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34058.218750, 28839.718842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27762.708862, 20320.303314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34168.508667, 29940.539124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33741.765808, 24051.349609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33962.518219, 26311.881378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34095.200000, 30955.670000, 1717.984049, 1717.984049, 0.000000, X, Y) && !ellipse(29785.494000, 20248.608000, 1499.512043, 1499.512043, 0.000000, X, Y) && !ellipse(30918.636000, 34199.442000, 1670.248048, 1670.248048, 0.000000, X, Y) && !ellipse(30218.225983, 34820.371460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34132.721527, 30404.611694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28127.368000, 20288.974000, 860.664025, 860.664025, 0.000000, X, Y) && !ellipse(27679.240051, 19446.866379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32012.189453, 34150.993439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.815000, 19621.022000, 892.400026, 892.400026, 0.000000, X, Y) && !ellipse(29658.213928, 34749.591034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26510.424469, 18993.959534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25072.564148, 20311.937317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20217.271200, 26779.020000, 1278.664037, 1278.664037, 0.000000, X, Y) && !ellipse(34736.953094, 25537.064178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19975.238000, 31903.108000, 1619.384047, 1619.384047, 0.000000, X, Y) && !ellipse(29445.582600, 34307.111200, 1624.144047, 1624.144047, 0.000000, X, Y) && !ellipse(20108.427200, 27953.326000, 1446.703486, 1446.703486, 0.000000, X, Y) && !ellipse(28677.140000, 19403.536000, 1508.432043, 1508.432043, 0.000000, X, Y) && !ellipse(20520.041168, 32329.006134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34775.979370, 29272.254974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34820.875916, 31172.401031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25391.446000, 20325.505800, 1406.344040, 1406.344040, 0.000000, X, Y) && !ellipse(35174.435547, 29477.738312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35208.911102, 30749.738953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23826.126129, 34478.087738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24611.742000, 20490.516200, 1406.344040, 1406.344040, 0.000000, X, Y) && !ellipse(35432.995575, 26830.647552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33490.000000, 22661.569214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34443.314000, 31283.794000, 3359.376097, 3359.376097, 0.000000, X, Y) && !ellipse(20378.793610, 27431.215179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20492.921371, 30575.383179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34914.601105, 31867.251404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20513.677063, 32834.542297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35740.840000, 32094.790000, 1764.424051, 1764.424051, 0.000000, X, Y) && !ellipse(20605.429565, 31273.724915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27303.359589, 15947.995758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20464.604156, 29613.373138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35729.195953, 29147.731445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34909.665405, 23757.137848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19704.452011, 26935.035339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19665.620880, 32198.559235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30859.423523, 20096.877289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34924.799072, 32661.182159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22214.260498, 34562.645111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33672.841248, 23151.374329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35850.722000, 28062.982000, 904.112026, 904.112026, 0.000000, X, Y) && !ellipse(23419.750400, 20563.768800, 1429.240041, 1429.240041, 0.000000, X, Y) && !ellipse(22876.080000, 20482.226000, 1459.008042, 1459.008042, 0.000000, X, Y) && !ellipse(20305.351517, 26314.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32821.390000, 34132.895000, 1756.312051, 1756.312051, 0.000000, X, Y) && !ellipse(25253.595800, 19846.008600, 1437.400041, 1437.400041, 0.000000, X, Y) && !ellipse(20434.169556, 28720.003571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23123.074371, 34516.067932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35709.536000, 30196.530600, 1703.192049, 1703.192049, 0.000000, X, Y) && !ellipse(30623.516000, 20157.930200, 1537.592044, 1537.592044, 0.000000, X, Y) && !ellipse(20473.560898, 30030.295044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27062.224000, 15484.086000, 1699.480049, 1699.480049, 0.000000, X, Y) && !ellipse(26858.830688, 14054.081055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26351.165192, 14105.929794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26617.005310, 13256.098724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.539581, 12312.349976, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 04:48:21 2012] Writing fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src110.gif
[Sun Jan  1 06:31:04 2012] Mean detx,y = (540.09, -7768.38) 
[Sun Jan  1 06:31:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 06:37:13 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 06:37:14 2012] Setting source spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src110_src_b10.pi.gz
[Sun Jan  1 06:37:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src110_bgd.pi.gz
[Sun Jan  1 13:13:51 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:51 2012] Error reading totcts from fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src110_src_b10.pi.gz
[Sun Jan  1 13:13:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:57 2012] Using photon index=1.80, rate=0.228, arf fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src110.arf
[Sun Jan  1 13:13:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:57 2012] Updating source flux to 3.3e-12
[Sun Jan  1 13:24:21 2012] Flag c found in src. 110 procflags, skipping spectral fitting