[Wed Dec 28 14:54:03 2011] Detection parameters:
  Position = (340.6, 229.1) = 5 34 23.39 21 54 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2427.3 +/- 293.5
  Background counts = 402.0
  Rate = 0.3 +/- 0.04

[Wed Dec 28 14:54:13 2011] Off-axis axis estimate = 5.89'
[Thu Dec 29 11:51:42 2011] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 11:51:42 2011] Initial guess for spatial extent in simple fitting = 9.37"
[Thu Dec 29 11:51:42 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.887
[Thu Dec 29 11:51:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.37"
[Fri Dec 30 09:22:45 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 30 09:22:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 09:22:45 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 30 09:22:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 09:22:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:22:49 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 30 09:22:49 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 30 09:22:49 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 30 09:24:15 2011] Warning, spatial fit 1 centroid is now closest to src. 108
[Fri Dec 30 09:24:16 2011] Source 1 is offset by 7.360948 and 3.335189 pixels which is larger than
2 X fitted extent = 1.033839 x 1.033839, not incorporating fit results
[Fri Dec 30 09:24:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:24:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:24:16 2011] Assessing source extent using major
[Fri Dec 30 09:24:16 2011] Source does appear to be extended
[Fri Dec 30 09:24:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:24:17 2011] Source is confused with source 108
[Fri Dec 30 09:24:17 2011] Source is confused with source 107
[Fri Dec 30 09:24:17 2011] Source is confused with source 120
[Fri Dec 30 09:24:17 2011] Source is confused with source 105
[Sat Dec 31 00:06:10 2011] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 00:06:11 2011] Initial guess for spatial extent in simple fitting = 9.37"
[Sat Dec 31 00:06:11 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.887
[Sat Dec 31 00:06:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.37"
[Sat Dec 31 22:04:14 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Dec 31 22:04:14 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Dec 31 22:04:14 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Dec 31 22:04:18 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Dec 31 22:04:18 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Dec 31 22:04:18 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Dec 31 22:05:35 2011] Warning, spatial fit 1 centroid is now closest to src. 107
[Sat Dec 31 22:05:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:05:36 2011] Assessing source extent using major
[Sat Dec 31 22:05:36 2011] Source does appear to be extended
[Sat Dec 31 22:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:48:16 2012] Counts = 2427.274658, rescaling region sizes by 2.000000
[Sun Jan  1 04:48:16 2012] XMMSAS src. selection expression = ellipse(29586.456451, 19880.107422, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jan  1 04:48:16 2012] Writing source region out to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src1_src.reg
[Sun Jan  1 04:48:16 2012] Extracting stamp from image fullrun_mos2_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (266, 154) - (416, 304)
[Sun Jan  1 04:48:16 2012] XMMSAS bgd. selection expression = annulus(29586.456451, 19880.107422, 4350.000000, 8700.000000, X, Y) && !ellipse(33980.630829, 26840.187073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27003.936000, 18461.692000, 829.896024, 829.896024, 0.000000, X, Y) && !ellipse(26612.372000, 19856.288000, 1676.216048, 209.527206, 91.143000, X, Y) && !ellipse(27313.257538, 20277.452469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34047.189758, 28185.787781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27407.726000, 19342.386000, 1005.272029, 1005.272029, 0.000000, X, Y) && !ellipse(33847.866089, 24904.145020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29288.214000, 20168.946000, 1499.512043, 1499.512043, 0.000000, X, Y) && !ellipse(27478.235748, 18741.701218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34058.218750, 28839.718842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27762.708862, 20320.303314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33741.765808, 24051.349609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33962.518219, 26311.881378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29785.494000, 20248.608000, 1499.512043, 1499.512043, 0.000000, X, Y) && !ellipse(26206.818000, 20333.809000, 1398.496040, 1398.496040, 0.000000, X, Y) && !ellipse(28127.368000, 20288.974000, 860.664025, 860.664025, 0.000000, X, Y) && !ellipse(27679.240051, 19446.866379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.815000, 19621.022000, 892.400026, 892.400026, 0.000000, X, Y) && !ellipse(26510.424469, 18993.959534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25072.564148, 20311.937317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20217.271200, 26779.020000, 1278.664037, 1278.664037, 0.000000, X, Y) && !ellipse(34736.953094, 25537.064178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20108.427200, 27953.326000, 1446.703486, 1446.703486, 0.000000, X, Y) && !ellipse(28677.140000, 19403.536000, 1508.432043, 1508.432043, 0.000000, X, Y) && !ellipse(34775.979370, 29272.254974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25391.446000, 20325.505800, 1406.344040, 1406.344040, 0.000000, X, Y) && !ellipse(24611.742000, 20490.516200, 1406.344040, 1406.344040, 0.000000, X, Y) && !ellipse(35432.995575, 26830.647552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33490.000000, 22661.569214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34443.314000, 31283.794000, 3359.376097, 3359.376097, 0.000000, X, Y) && !ellipse(20378.793610, 27431.215179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27303.359589, 15947.995758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35729.195953, 29147.731445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34909.665405, 23757.137848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30859.423523, 20096.877289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33672.841248, 23151.374329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35850.722000, 28062.982000, 904.112026, 904.112026, 0.000000, X, Y) && !ellipse(23419.750400, 20563.768800, 1429.240041, 1429.240041, 0.000000, X, Y) && !ellipse(22876.080000, 20482.226000, 1459.008042, 1459.008042, 0.000000, X, Y) && !ellipse(20305.351517, 26314.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25253.595800, 19846.008600, 1437.400041, 1437.400041, 0.000000, X, Y) && !ellipse(20434.169556, 28720.003571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35709.536000, 30196.530600, 1703.192049, 1703.192049, 0.000000, X, Y) && !ellipse(30623.516000, 20157.930200, 1537.592044, 1537.592044, 0.000000, X, Y) && !ellipse(27062.224000, 15484.086000, 1699.480049, 1699.480049, 0.000000, X, Y) && !ellipse(26858.830688, 14054.081055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26351.165192, 14105.929794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26617.005310, 13256.098724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.539581, 12312.349976, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 04:48:16 2012] Writing fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src1.gif
[Sun Jan  1 04:48:49 2012] Mean detx,y = (-2711.44, -7608.77) 
[Sun Jan  1 04:48:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 04:50:42 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 04:50:43 2012] Setting source spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jan  1 04:50:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jan  1 08:20:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 08:20:48 2012] rmf not generated due to insufficient counts
[Sun Jan  1 13:13:49 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:49 2012] Error reading totcts from fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jan  1 13:13:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:55 2012] Using photon index=1.80, rate=0.322, arf fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src1.arf
[Sun Jan  1 13:13:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:55 2012] Updating source flux to 4.8e-12
[Sun Jan  1 13:24:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jan  1 13:34:31 2012] xmm0153750501/analysis//spectral/fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete