[Wed Dec 28 14:51:22 2011] Detection parameters:
  Position = (323.3, 216.2) = 5 34 28.79 21 53 21.4
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 75.7 +/- 21.6
  Background counts = 544.6
  Rate = 0.01 +/- 0.004

[Wed Dec 28 14:51:22 2011] Off-axis axis estimate = 6.23'
[Wed Dec 28 15:04:31 2011] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 15:04:31 2011] Initial guess for spatial extent in simple fitting = 9.54"
[Wed Dec 28 15:04:31 2011] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.723
[Wed Dec 28 15:04:31 2011] Giving source the simple spatial ID 95 for pass 0, mean size = 9.54"
[Thu Dec 29 11:51:38 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src95.ximg exists
[Thu Dec 29 11:51:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src95.csv
[Thu Dec 29 11:51:38 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src95_1.ximg exists
[Thu Dec 29 11:51:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src95.csv
[Thu Dec 29 11:51:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 11:51:42 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Thu Dec 29 11:51:42 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Thu Dec 29 11:51:42 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly
[Fri Dec 30 09:23:38 2011] Source 96 is offset by 7.242836 and 3.104271 pixels which is larger than
2 X fitted extent = 1.138326 x 1.138326, not incorporating fit results
[Fri Dec 30 09:23:38 2011] Source 96 is offset by -4.190405 and 6.812156 pixels which is larger than
2 X fitted extent = 1.096906 x 1.096906, not incorporating fit results
[Fri Dec 30 09:23:38 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:23:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:23:38 2011] Assessing source extent using major
[Fri Dec 30 09:23:38 2011] Source does appear to be extended
[Fri Dec 30 09:23:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:23:38 2011] Source is confused with source 42
[Fri Dec 30 09:24:47 2011] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 09:24:47 2011] Initial guess for spatial extent in simple fitting = 9.54"
[Fri Dec 30 09:24:47 2011] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.723
[Fri Dec 30 09:24:47 2011] Giving source the simple spatial ID 79 for pass 1, mean size = 9.54"
[Sat Dec 31 00:06:06 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src79.ximg exists
[Sat Dec 31 00:06:06 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src79_1.ximg exists
[Sat Dec 31 00:06:06 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src79 appears to have run properly
[Sat Dec 31 00:06:10 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Sat Dec 31 00:06:10 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Sat Dec 31 00:06:10 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Sat Dec 31 22:04:59 2011] Source 96 is offset by 7.242836 and 3.104271 pixels which is larger than
2 X fitted extent = 1.138326 x 1.138326, not incorporating fit results
[Sat Dec 31 22:04:59 2011] Source 96 is offset by -6.223026 and -7.094488 pixels which is larger than
2 X fitted extent = 1.098428 x 1.098428, not incorporating fit results
[Sat Dec 31 22:04:59 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:04:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:04:59 2011] Assessing source extent using major
[Sat Dec 31 22:04:59 2011] Source does appear to be extended
[Sat Dec 31 22:04:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 22:06:14 2011] XMMSAS src. selection expression = ellipse(28082.902740, 18761.847580, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Dec 31 22:06:14 2011] Writing source region out to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src96_src.reg
[Sat Dec 31 22:06:14 2011] Extracting stamp from image fullrun_mos1_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (248, 141) - (398, 291)
[Sat Dec 31 22:06:15 2011] XMMSAS bgd. selection expression = annulus(28082.902740, 18761.847580, 2175.000000, 4350.000000, X, Y) && !ellipse(25717.614000, 20535.184800, 1399.208040, 1399.208040, 0.000000, X, Y) && !ellipse(26080.942000, 20146.942000, 1741.992050, 1741.992050, 0.000000, X, Y) && !ellipse(26581.378000, 20296.563000, 1399.208040, 1399.208040, 0.000000, X, Y) && !ellipse(27479.395200, 20374.148200, 1419.640041, 1419.640041, 0.000000, X, Y) && !ellipse(26562.922400, 13739.946000, 1873.824054, 1873.824054, 0.000000, X, Y) && !ellipse(29239.466000, 20262.452200, 1485.528043, 1485.528043, 0.000000, X, Y) && !ellipse(27005.384000, 19863.208000, 2798.416081, 2798.416081, 0.000000, X, Y) && !ellipse(26826.706600, 15461.206000, 3409.680098, 3409.680098, 0.000000, X, Y) && !ellipse(28774.211800, 20325.590000, 1454.880042, 1454.880042, 0.000000, X, Y) && !ellipse(27817.374000, 19932.554000, 1685.352048, 1685.352048, 0.000000, X, Y) && !ellipse(26590.354126, 19164.631454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.395142, 18301.583649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26708.625061, 17613.588562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27064.630000, 16290.820000, 1704.840049, 1704.840049, 0.000000, X, Y)
[Sat Dec 31 22:06:15 2011] Writing fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src96.gif
[Sun Jan  1 01:07:31 2012] Mean detx,y = (-8354.98, 979.67) 
[Sun Jan  1 01:07:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 01:08:02 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 01:08:02 2012] Setting source spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Sun Jan  1 01:08:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Sun Jan  1 04:47:57 2012] Not generating rmf since there are only 75 counts
[Sun Jan  1 04:47:57 2012] rmf not generated due to insufficient counts
[Sun Jan  1 13:13:45 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:45 2012] Error reading totcts from fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Sun Jan  1 13:13:49 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:49 2012] Using photon index=1.80, rate=0.0148, arf fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src96.arf
[Sun Jan  1 13:13:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:49 2012] Updating source flux to 2.2e-13
[Sun Jan  1 13:14:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting