[Wed Dec 28 14:51:21 2011] Detection parameters:
  Position = (322.4, 224.7) = 5 34 29.07 21 54 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.6 +/- 19.6
  Background counts = 156.3
  Rate = 0.02 +/- 0.003

[Wed Dec 28 14:51:22 2011] Off-axis axis estimate = 5.62'
[Wed Dec 28 15:04:31 2011] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 15:04:31 2011] Initial guess for spatial extent in simple fitting = 9.24"
[Wed Dec 28 15:04:31 2011] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.872
[Wed Dec 28 15:04:31 2011] Giving source the simple spatial ID 86 for pass 0, mean size = 9.24"
[Thu Dec 29 11:51:38 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src86.ximg exists
[Thu Dec 29 11:51:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src86.csv
[Thu Dec 29 11:51:38 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src86_1.ximg exists
[Thu Dec 29 11:51:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src86.csv
[Thu Dec 29 11:51:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 11:51:42 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Thu Dec 29 11:51:42 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Thu Dec 29 11:51:42 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src86 appears to have run properly
[Fri Dec 30 09:23:38 2011] Source 87 is offset by -8.048347 and -3.584056 pixels which is larger than
2 X fitted extent = 5.904966 x 5.904966, not incorporating fit results
[Fri Dec 30 09:23:38 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:23:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:23:38 2011] Assessing source extent using major
[Fri Dec 30 09:23:38 2011] Source does appear to be extended
[Fri Dec 30 09:23:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:23:38 2011] Source is confused with source 96
[Fri Dec 30 09:24:47 2011] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 09:24:47 2011] Initial guess for spatial extent in simple fitting = 9.24"
[Fri Dec 30 09:24:47 2011] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.872
[Fri Dec 30 09:24:47 2011] Giving source the simple spatial ID 73 for pass 1, mean size = 9.24"
[Sat Dec 31 00:06:05 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src73.ximg exists
[Sat Dec 31 00:06:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src73.csv
[Sat Dec 31 00:06:05 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src73_1.ximg exists
[Sat Dec 31 00:06:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src73.csv
[Sat Dec 31 00:06:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 00:06:10 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Sat Dec 31 00:06:10 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Sat Dec 31 00:06:10 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Sat Dec 31 22:04:59 2011] Source 87 is offset by -2.598141 and -6.297573 pixels which is larger than
2 X fitted extent = 1.443071 x 1.443071, not incorporating fit results
[Sat Dec 31 22:04:59 2011] Spatial fit model total counts = 5735.350000, observed total counts = 5742.000000
[Sat Dec 31 22:04:59 2011] Offset between fit and detection position for source 87 = 5.369141 pixels
[Sat Dec 31 22:04:59 2011] Warning, changing simple spatial fit ID from 73 to 47
[Sat Dec 31 22:04:59 2011] 4927.312000 total counts/ 4334.180000 bgd. counts: snr = 9.009442
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 5.369141 pixels
  Position = (320.3, 229.7) = 5 34 29.75 21 54 30.7
  Extent = 21.1 (18.0-23.7)", rotation angle = 0
  Source counts = 593.1 +/- 70.2
  Background counts = 4334.2
  Rate = 0.1 +/- 0.01
[Sat Dec 31 22:04:59 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:04:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:04:59 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 22:04:59 2011] Source does appear to be extended
[Sat Dec 31 22:04:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 22:06:14 2011] XMMSAS src. selection expression = ellipse(27817.374000, 19932.554000, 1264.014036, 1264.014036, 0.000000, X, Y)
[Sat Dec 31 22:06:14 2011] Writing source region out to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src87_src.reg
[Sat Dec 31 22:06:14 2011] Extracting stamp from image fullrun_mos1_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (248, 157) - (393, 302)
[Sat Dec 31 22:06:14 2011] XMMSAS bgd. selection expression = annulus(27817.374000, 19932.554000, 2106.690061, 4213.380121, X, Y) && !ellipse(25717.614000, 20535.184800, 1399.208040, 1399.208040, 0.000000, X, Y) && !ellipse(26080.942000, 20146.942000, 1741.992050, 1741.992050, 0.000000, X, Y) && !ellipse(26581.378000, 20296.563000, 1399.208040, 1399.208040, 0.000000, X, Y) && !ellipse(27479.395200, 20374.148200, 1419.640041, 1419.640041, 0.000000, X, Y) && !ellipse(29239.466000, 20262.452200, 1485.528043, 1485.528043, 0.000000, X, Y) && !ellipse(27005.384000, 19863.208000, 2798.416081, 2798.416081, 0.000000, X, Y) && !ellipse(26826.706600, 15461.206000, 3409.680098, 3409.680098, 0.000000, X, Y) && !ellipse(28774.211800, 20325.590000, 1454.880042, 1454.880042, 0.000000, X, Y) && !ellipse(26590.354126, 19164.631454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.395142, 18301.583649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26708.625061, 17613.588562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27064.630000, 16290.820000, 1704.840049, 1704.840049, 0.000000, X, Y) && !ellipse(28082.902740, 18761.847580, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sat Dec 31 22:06:14 2011] Writing fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src87.gif
[Sun Jan  1 01:03:25 2012] Mean detx,y = (-7408.34, 697.84) 
[Sun Jan  1 01:03:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 01:04:13 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 01:04:14 2012] Setting source spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Sun Jan  1 01:04:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Sun Jan  1 13:13:44 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:44 2012] Error reading totcts from fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Sun Jan  1 13:13:48 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:48 2012] Using photon index=1.80, rate=0.116, arf fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src87.arf
[Sun Jan  1 13:13:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:48 2012] Updating source flux to 1.7e-12
[Sun Jan  1 13:14:04 2012] Flag b found in src. 87 procflags, skipping spectral fitting
[Sun Jan  1 13:14:04 2012] Flag c found in src. 87 procflags, skipping spectral fitting