[Wed Dec 28 14:51:20 2011] Detection parameters:
  Position = (295.4, 396.9) = 5 34 37.54 22 6 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.2 +/- 21.4
  Background counts = 129.1
  Rate = 0.02 +/- 0.003

[Wed Dec 28 14:51:22 2011] Off-axis axis estimate = 7.14'
[Wed Dec 28 15:04:31 2011] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 15:04:31 2011] Initial guess for spatial extent in simple fitting = 10.00"
[Wed Dec 28 15:04:31 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.957
[Wed Dec 28 15:04:31 2011] Giving source the simple spatial ID 75 for pass 0, mean size = 10.00"
[Thu Dec 29 11:51:38 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src75.ximg exists
[Thu Dec 29 11:51:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src75.csv
[Thu Dec 29 11:51:38 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src75_1.ximg exists
[Thu Dec 29 11:51:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src75.csv
[Thu Dec 29 11:51:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 11:51:41 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Thu Dec 29 11:51:41 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Thu Dec 29 11:51:41 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Fri Dec 30 09:23:38 2011] Spatial fit model total counts = 1571.990000, observed total counts = 1572.000000
[Fri Dec 30 09:23:38 2011] Offset between fit and detection position for source 76 = 2.231342 pixels
[Fri Dec 30 09:23:38 2011] Warning, changing simple spatial fit ID from 75 to 15
[Fri Dec 30 09:23:38 2011] 1539.735000 total counts/ 1348.040000 bgd. counts: snr = 5.221069
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 2.231342 pixels
  Position = (293.3, 396.0) = 5 34 38.18 22 6 34.3
  Extent = 14.0 (6.7-20.2)", rotation angle = 0
  Source counts = 191.7 +/- 39.2
  Background counts = 1348.0
  Rate = 0.04 +/- 0.008
[Fri Dec 30 09:23:38 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:23:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:23:38 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 09:23:38 2011] Source does appear to be extended
[Fri Dec 30 09:23:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:23:38 2011] Source is confused with source 15
[Fri Dec 30 09:24:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 09:24:47 2011] Initial guess for spatial extent in simple fitting = 14.05"
[Fri Dec 30 09:24:47 2011] source mask rpix=3.2, npix_max = 55, mask sum = 44, frac = 0.791
[Fri Dec 30 09:24:47 2011] Giving source the simple spatial ID 63 for pass 1, mean size = 14.05"
[Sat Dec 31 00:06:05 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src63.ximg exists
[Sat Dec 31 00:06:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src63.csv
[Sat Dec 31 00:06:05 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src63_1.ximg exists
[Sat Dec 31 00:06:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src63.csv
[Sat Dec 31 00:06:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 00:06:09 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Sat Dec 31 00:06:09 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Sat Dec 31 00:06:09 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Sat Dec 31 22:04:59 2011] Warning, spatial fit 63 centroid is now closest to src. 15
[Sat Dec 31 22:04:59 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:04:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:04:59 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 22:04:59 2011] Source does appear to be extended
[Sat Dec 31 22:04:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 22:06:13 2011] XMMSAS src. selection expression = ellipse(25471.542000, 34403.606000, 842.730024, 842.730024, 0.000000, X, Y)
[Sat Dec 31 22:06:13 2011] Writing source region out to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src76_src.reg
[Sat Dec 31 22:06:13 2011] Extracting stamp from image fullrun_mos1_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (245, 348) - (342, 444)
[Sat Dec 31 22:06:13 2011] XMMSAS bgd. selection expression = annulus(25471.542000, 34403.606000, 1404.550040, 2809.100081, X, Y) && !ellipse(29068.314600, 34082.206800, 1612.936046, 721.896021, 0.000000, X, Y) && !ellipse(28401.611000, 35168.722000, 1631.512047, 1631.512047, 0.000000, X, Y) && !ellipse(27812.280914, 35093.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28208.016000, 34401.808000, 1604.264046, 1604.264046, 0.000000, X, Y) && !ellipse(25735.427800, 34353.078000, 1600.128046, 1600.128046, 0.000000, X, Y) && !ellipse(26464.370000, 34157.598000, 1588.200046, 419.188012, 2.337000, X, Y) && !ellipse(27823.992000, 36070.070000, 2132.504061, 2132.504061, 0.000000, X, Y) && !ellipse(28386.982000, 38476.132000, 1818.904052, 1818.904052, 0.000000, X, Y) && !ellipse(27736.153259, 37798.313385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27986.458000, 35585.164000, 3387.120097, 3387.120097, 0.000000, X, Y) && !ellipse(27718.234467, 37192.263123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29213.816000, 35243.516000, 1695.400049, 488.247214, 82.258000, X, Y) && !ellipse(26578.136000, 34661.794000, 2325.960067, 2325.960067, 0.000000, X, Y) && !ellipse(28246.473785, 37804.502258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28543.824000, 36812.486000, 1797.728052, 1797.728052, 0.000000, X, Y) && !ellipse(26822.387756, 35166.470459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23305.550000, 34431.923800, 1630.216047, 1630.216047, 0.000000, X, Y)
[Sat Dec 31 22:06:13 2011] Writing fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src76.gif
[Sun Jan  1 00:42:48 2012] Mean detx,y = (7168.63, -2137.26) 
[Sun Jan  1 00:42:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 00:43:20 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 00:43:21 2012] Setting source spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Sun Jan  1 00:43:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Sun Jan  1 13:13:44 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:44 2012] Error reading totcts from fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Sun Jan  1 13:13:48 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:48 2012] Using photon index=1.80, rate=0.0376, arf fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src76.arf
[Sun Jan  1 13:13:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:48 2012] Updating source flux to 6e-13
[Sun Jan  1 13:14:04 2012] Flag c found in src. 76 procflags, skipping spectral fitting