[Wed Dec 28 14:51:16 2011] Detection parameters:
  Position = (319.9, 411.1) = 5 34 29.86 22 7 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.3 +/- 24.5
  Background counts = 133.4
  Rate = 0.03 +/- 0.004

[Wed Dec 28 14:51:22 2011] Off-axis axis estimate = 8.31'
[Wed Dec 28 15:04:31 2011] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 15:04:31 2011] Initial guess for spatial extent in simple fitting = 10.58"
[Wed Dec 28 15:04:31 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Wed Dec 28 15:04:31 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 10.58"
[Thu Dec 29 11:51:37 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src37.ximg exists
[Thu Dec 29 11:51:37 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src37.csv
[Thu Dec 29 11:51:37 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu Dec 29 11:51:37 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src37.csv
[Thu Dec 29 11:51:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 11:51:40 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu Dec 29 11:51:40 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu Dec 29 11:51:40 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Dec 30 09:23:38 2011] Warning, spatial fit 37 centroid is now closest to src. 31
[Fri Dec 30 09:23:38 2011] Source 37 is offset by 2.601369 and 1.753316 pixels which is larger than
2 X fitted extent = 1.163549 x 1.163549, not incorporating fit results
[Fri Dec 30 09:23:38 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:23:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:23:38 2011] Assessing source extent using major
[Fri Dec 30 09:23:38 2011] Source does appear to be extended
[Fri Dec 30 09:23:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:23:38 2011] Source is confused with source 11
[Fri Dec 30 09:24:47 2011] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 09:24:47 2011] Initial guess for spatial extent in simple fitting = 10.58"
[Fri Dec 30 09:24:47 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Fri Dec 30 09:24:47 2011] Giving source the simple spatial ID 34 for pass 1, mean size = 10.58"
[Sat Dec 31 00:06:04 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src34.ximg exists
[Sat Dec 31 00:06:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src34.csv
[Sat Dec 31 00:06:04 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src34_1.ximg exists
[Sat Dec 31 00:06:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src34.csv
[Sat Dec 31 00:06:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 00:06:08 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sat Dec 31 00:06:08 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sat Dec 31 00:06:08 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Sat Dec 31 22:04:59 2011] Spatial fit model total counts = 7400.910000, observed total counts = 7398.000000
[Sat Dec 31 22:04:59 2011] Offset between fit and detection position for source 37 = 2.760926 pixels
[Sat Dec 31 22:04:59 2011] Warning, changing simple spatial fit ID from 34 to 28
[Sat Dec 31 22:04:59 2011] 6775.390000 total counts/ 3182.350000 bgd. counts: snr = 63.692468
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 2.760926 pixels
  Position = (322.2, 409.6) = 5 34 29.13 22 7 33.4
  Extent = 42.3 (42.3-84.7)", rotation angle = 0
  Source counts = 3593.0 +/- 82.3
  Background counts = 3182.3
  Rate = 0.7 +/- 0.02
[Sat Dec 31 22:04:59 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:04:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:04:59 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 22:04:59 2011] Source does appear to be extended
[Sat Dec 31 22:04:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 22:06:11 2011] Counts = 3593.040000, rescaling region sizes by 2.000000
[Sat Dec 31 22:06:11 2011] XMMSAS src. selection expression = ellipse(27986.458000, 35585.164000, 5080.680146, 5080.680146, 0.000000, X, Y)
[Sat Dec 31 22:06:11 2011] Writing source region out to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src37_src.reg
[Sat Dec 31 22:06:11 2011] Extracting stamp from image fullrun_mos1_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (30, 118) - (595, 595)
[Sat Dec 31 22:06:11 2011] XMMSAS bgd. selection expression = annulus(27986.458000, 35585.164000, 16935.600487, 33871.200975, X, Y) && !ellipse(25717.614000, 20535.184800, 1399.208040, 1399.208040, 0.000000, X, Y) && !ellipse(34780.202000, 31775.930000, 686.890420, 686.890420, 0.000000, X, Y) && !ellipse(31240.295000, 34021.036400, 1671.936048, 1671.936048, 0.000000, X, Y) && !ellipse(34057.499237, 27551.416321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34097.268921, 26673.666290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34185.070600, 25541.361400, 997.384029, 997.384029, 0.000000, X, Y) && !ellipse(29068.314600, 34082.206800, 1612.936046, 721.896021, 0.000000, X, Y) && !ellipse(34112.256561, 29091.386414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29860.588400, 34130.149160, 813.784023, 813.784023, 0.000000, X, Y) && !ellipse(28401.611000, 35168.722000, 1631.512047, 1631.512047, 0.000000, X, Y) && !ellipse(27812.280914, 35093.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28208.016000, 34401.808000, 1604.264046, 1604.264046, 0.000000, X, Y) && !ellipse(25735.427800, 34353.078000, 1600.128046, 1600.128046, 0.000000, X, Y) && !ellipse(26464.370000, 34157.598000, 1588.200046, 419.188012, 2.337000, X, Y) && !ellipse(30421.839068, 34062.009087, 1694.936049, 700.030960, 359.920322, X, Y) && !ellipse(34579.356200, 31759.798800, 1373.784040, 1373.784040, 0.000000, X, Y) && !ellipse(34331.128800, 30739.554600, 1334.480038, 1334.480038, 0.000000, X, Y) && !ellipse(34174.830292, 28317.025879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34914.524109, 26724.998627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34399.934000, 26380.580000, 1576.360045, 1101.712032, 91.795000, X, Y) && !ellipse(34297.918000, 25618.704000, 498.691214, 498.691214, 0.000000, X, Y) && !ellipse(33950.846710, 24751.241882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26080.942000, 20146.942000, 1741.992050, 1741.992050, 0.000000, X, Y) && !ellipse(26581.378000, 20296.563000, 1399.208040, 1399.208040, 0.000000, X, Y) && !ellipse(27479.395200, 20374.148200, 1419.640041, 1419.640041, 0.000000, X, Y) && !ellipse(26752.584381, 13264.367813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27823.992000, 36070.070000, 2132.504061, 2132.504061, 0.000000, X, Y) && !ellipse(28186.310822, 41368.974670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28117.545563, 40401.720947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27853.359528, 39105.317932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28386.982000, 38476.132000, 1818.904052, 1818.904052, 0.000000, X, Y) && !ellipse(27736.153259, 37798.313385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35442.006760, 28183.261200, 539.829616, 539.829616, 0.000000, X, Y) && !ellipse(34012.000000, 27960.155426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26562.922400, 13739.946000, 1873.824054, 1873.824054, 0.000000, X, Y) && !ellipse(28479.523600, 42517.782000, 2814.152081, 2814.152081, 0.000000, X, Y) && !ellipse(27736.901978, 41096.276611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27718.234467, 37192.263123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29213.816000, 35243.516000, 1695.400049, 488.247214, 82.258000, X, Y) && !ellipse(26578.136000, 34661.794000, 2325.960067, 2325.960067, 0.000000, X, Y) && !ellipse(34819.406000, 30501.578000, 598.825617, 598.825617, 0.000000, X, Y) && !ellipse(34486.671800, 29097.121000, 1653.160048, 1653.160048, 0.000000, X, Y) && !ellipse(34590.934000, 27672.259800, 892.800026, 892.800026, 0.000000, X, Y) && !ellipse(29239.466000, 20262.452200, 1485.528043, 1485.528043, 0.000000, X, Y) && !ellipse(27005.384000, 19863.208000, 2798.416081, 2798.416081, 0.000000, X, Y) && !ellipse(27036.534454, 12812.318542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26826.706600, 15461.206000, 3409.680098, 3409.680098, 0.000000, X, Y) && !ellipse(27456.605225, 40488.320038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27736.678955, 38575.536041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28246.473785, 37804.502258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28543.824000, 36812.486000, 1797.728052, 1797.728052, 0.000000, X, Y) && !ellipse(26822.387756, 35166.470459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30237.960815, 35090.231293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32216.921417, 34662.410492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.542000, 34403.606000, 1123.640032, 1123.640032, 0.000000, X, Y) && !ellipse(32613.566864, 34666.196564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23305.550000, 34431.923800, 1630.216047, 1630.216047, 0.000000, X, Y) && !ellipse(33180.577576, 34228.031769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32387.942400, 34011.400600, 1644.552047, 1644.552047, 0.000000, X, Y) && !ellipse(35098.408783, 31348.002014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34881.994690, 25451.325317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34344.896000, 23397.472000, 1335.632038, 1335.632038, 0.000000, X, Y) && !ellipse(34115.522247, 23132.393524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28774.211800, 20325.590000, 1454.880042, 1454.880042, 0.000000, X, Y) && !ellipse(27817.374000, 19932.554000, 1685.352048, 1685.352048, 0.000000, X, Y) && !ellipse(26590.354126, 19164.631454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.395142, 18301.583649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26708.625061, 17613.588562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27064.630000, 16290.820000, 1704.840049, 1704.840049, 0.000000, X, Y) && !ellipse(26183.919586, 13081.035385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.902740, 18761.847580, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27906.568970, 43883.194489, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 31 22:06:11 2011] Writing fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src37.gif
[Sat Dec 31 23:28:21 2011] Mean detx,y = (8472.87, 461.12) 
[Sat Dec 31 23:28:26 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 23:41:00 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 23:41:00 2011] Setting source spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Dec 31 23:41:00 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun Jan  1 13:13:42 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:42 2012] Error reading totcts from fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun Jan  1 13:13:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:47 2012] Using photon index=1.80, rate=0.705, arf fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src37.arf
[Sun Jan  1 13:13:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:47 2012] Updating source flux to 9.9e-12
[Sun Jan  1 13:14:04 2012] Flag b found in src. 37 procflags, skipping spectral fitting
[Sun Jan  1 13:14:04 2012] Flag c found in src. 37 procflags, skipping spectral fitting