[Wed Dec 28 14:51:16 2011] Detection parameters:
  Position = (324.1, 440.9) = 5 34 28.54 22 9 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.8 +/- 20.0
  Background counts = 91.6
  Rate = 0.03 +/- 0.004

[Wed Dec 28 14:51:22 2011] Off-axis axis estimate = 10.50'
[Wed Dec 28 15:04:31 2011] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 15:04:31 2011] Initial guess for spatial extent in simple fitting = 11.68"
[Wed Dec 28 15:04:31 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.888
[Wed Dec 28 15:04:31 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 11.68"
[Thu Dec 29 11:51:37 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src35.ximg exists
[Thu Dec 29 11:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src35.csv
[Thu Dec 29 11:51:37 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu Dec 29 11:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src35.csv
[Thu Dec 29 11:51:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 11:51:40 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu Dec 29 11:51:40 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu Dec 29 11:51:40 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Fri Dec 30 09:23:38 2011] Warning, spatial fit 35 centroid is now closest to src. 64
[Fri Dec 30 09:23:38 2011] Source 35 is offset by -5.396995 and -5.586387 pixels which is larger than
2 X fitted extent = 1.314658 x 1.314658, not incorporating fit results
[Fri Dec 30 09:23:38 2011] Warning: source 65 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 11.549740 pixels away
[Fri Dec 30 09:23:38 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:23:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:23:38 2011] Assessing source extent using major
[Fri Dec 30 09:23:38 2011] Source does appear to be extended
[Fri Dec 30 09:23:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:23:38 2011] Source is confused with source 65
[Fri Dec 30 09:23:38 2011] Source is confused with source 66
[Fri Dec 30 09:24:47 2011] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 09:24:47 2011] Initial guess for spatial extent in simple fitting = 11.68"
[Fri Dec 30 09:24:47 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.888
[Fri Dec 30 09:24:47 2011] Giving source the simple spatial ID 32 for pass 1, mean size = 11.68"
[Sat Dec 31 00:06:04 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src32.ximg exists
[Sat Dec 31 00:06:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src32.csv
[Sat Dec 31 00:06:04 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src32_1.ximg exists
[Sat Dec 31 00:06:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src32.csv
[Sat Dec 31 00:06:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 00:06:08 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sat Dec 31 00:06:08 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sat Dec 31 00:06:08 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Sat Dec 31 22:04:59 2011] Warning, spatial fit 32 centroid is now closest to src. 66
[Sat Dec 31 22:04:59 2011] Source 35 is offset by -5.396995 and -5.586387 pixels which is larger than
2 X fitted extent = 1.314658 x 1.314658, not incorporating fit results
[Sat Dec 31 22:04:59 2011] Source 35 is offset by -5.166512 and 1.644096 pixels which is larger than
2 X fitted extent = 1.285848 x 1.285848, not incorporating fit results
[Sat Dec 31 22:04:59 2011] Spatial fit model total counts = 2701.000000, observed total counts = 2701.000000
[Sat Dec 31 22:04:59 2011] Offset between fit and detection position for source 35 = 3.310618 pixels
[Sat Dec 31 22:04:59 2011] Warning, changing simple spatial fit ID from 32 to 55
[Sat Dec 31 22:04:59 2011] 2209.031000 total counts/ 1690.780000 bgd. counts: snr = 12.603658
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 3.310618 pixels
  Position = (326.8, 442.8) = 5 34 27.68 22 9 57.9
  Extent = 22.7 (22.3-23.0)", rotation angle = 0
  Source counts = 518.3 +/- 47.0
  Background counts = 1690.8
  Rate = 0.1 +/- 0.009
[Sat Dec 31 22:04:59 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:04:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:04:59 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 22:04:59 2011] Source does appear to be extended
[Sat Dec 31 22:04:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 22:06:10 2011] XMMSAS src. selection expression = ellipse(28386.982000, 38476.132000, 1364.178039, 1364.178039, 0.000000, X, Y)
[Sat Dec 31 22:06:10 2011] Writing source region out to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src35_src.reg
[Sat Dec 31 22:06:10 2011] Extracting stamp from image fullrun_mos1_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (248, 364) - (405, 521)
[Sat Dec 31 22:06:11 2011] XMMSAS bgd. selection expression = annulus(28386.982000, 38476.132000, 2273.630065, 4547.260131, X, Y) && !ellipse(31240.295000, 34021.036400, 1671.936048, 1671.936048, 0.000000, X, Y) && !ellipse(29068.314600, 34082.206800, 1612.936046, 721.896021, 0.000000, X, Y) && !ellipse(29860.588400, 34130.149160, 813.784023, 813.784023, 0.000000, X, Y) && !ellipse(28401.611000, 35168.722000, 1631.512047, 1631.512047, 0.000000, X, Y) && !ellipse(27812.280914, 35093.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28208.016000, 34401.808000, 1604.264046, 1604.264046, 0.000000, X, Y) && !ellipse(25735.427800, 34353.078000, 1600.128046, 1600.128046, 0.000000, X, Y) && !ellipse(26464.370000, 34157.598000, 1588.200046, 419.188012, 2.337000, X, Y) && !ellipse(30421.839068, 34062.009087, 1694.936049, 700.030960, 359.920322, X, Y) && !ellipse(27823.992000, 36070.070000, 2132.504061, 2132.504061, 0.000000, X, Y) && !ellipse(28186.310822, 41368.974670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28117.545563, 40401.720947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27853.359528, 39105.317932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27736.153259, 37798.313385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27986.458000, 35585.164000, 3387.120097, 3387.120097, 0.000000, X, Y) && !ellipse(28479.523600, 42517.782000, 2814.152081, 2814.152081, 0.000000, X, Y) && !ellipse(27736.901978, 41096.276611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27718.234467, 37192.263123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29213.816000, 35243.516000, 1695.400049, 488.247214, 82.258000, X, Y) && !ellipse(26578.136000, 34661.794000, 2325.960067, 2325.960067, 0.000000, X, Y) && !ellipse(27456.605225, 40488.320038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27736.678955, 38575.536041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28246.473785, 37804.502258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28543.824000, 36812.486000, 1797.728052, 1797.728052, 0.000000, X, Y) && !ellipse(26822.387756, 35166.470459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30237.960815, 35090.231293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32216.921417, 34662.410492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.542000, 34403.606000, 1123.640032, 1123.640032, 0.000000, X, Y) && !ellipse(32613.566864, 34666.196564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23305.550000, 34431.923800, 1630.216047, 1630.216047, 0.000000, X, Y) && !ellipse(33180.577576, 34228.031769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32387.942400, 34011.400600, 1644.552047, 1644.552047, 0.000000, X, Y) && !ellipse(27906.568970, 43883.194489, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 31 22:06:11 2011] Writing fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src35.gif
[Sat Dec 31 23:26:34 2011] Mean detx,y = (11158.85, 386.22) 
[Sat Dec 31 23:26:37 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 23:27:17 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 23:27:17 2011] Setting source spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat Dec 31 23:27:17 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sun Jan  1 13:13:42 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:42 2012] Error reading totcts from fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun Jan  1 13:13:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:47 2012] Using photon index=1.80, rate=0.102, arf fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src35.arf
[Sun Jan  1 13:13:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:47 2012] Updating source flux to 1.9e-12
[Sun Jan  1 13:14:04 2012] Flag b found in src. 35 procflags, skipping spectral fitting
[Sun Jan  1 13:14:04 2012] Flag c found in src. 35 procflags, skipping spectral fitting