[Wed Dec 28 14:51:15 2011] Detection parameters:
  Position = (394.0, 295.0) = 5 34 6.70 21 59 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.5 +/- 22.2
  Background counts = 160.6
  Rate = 0.03 +/- 0.003

[Wed Dec 28 14:51:22 2011] Off-axis axis estimate = 6.93'
[Wed Dec 28 15:04:31 2011] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 15:04:31 2011] Initial guess for spatial extent in simple fitting = 9.89"
[Wed Dec 28 15:04:31 2011] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.779
[Wed Dec 28 15:04:31 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 9.89"
[Thu Dec 29 11:51:37 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src25.ximg exists
[Thu Dec 29 11:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src25.csv
[Thu Dec 29 11:51:37 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Dec 29 11:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src25.csv
[Thu Dec 29 11:51:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 11:51:39 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Dec 29 11:51:39 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Dec 29 11:51:39 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Dec 30 09:23:38 2011] Spatial fit model total counts = 1531.830000, observed total counts = 1608.000000
[Fri Dec 30 09:23:38 2011] Offset between fit and detection position for source 25 = 0.821680 pixels
[Fri Dec 30 09:23:38 2011] Warning, changing simple spatial fit ID from 25 to 7
[Fri Dec 30 09:23:38 2011] 1438.994000 total counts/ 1325.650000 bgd. counts: snr = 3.113036
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.821680 pixels
  Position = (394.8, 295.0) = 5 34 6.45 21 59 14.9
  Extent = 6.2 (4.6-8.1)", rotation angle = 0
  Source counts = 113.3 +/- 37.9
  Background counts = 1325.7
  Rate = 0.02 +/- 0.007
[Fri Dec 30 09:23:38 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:23:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:23:38 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 09:23:38 2011] Source does appear to be extended
[Fri Dec 30 09:23:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:23:38 2011] Source is confused with source 7
[Fri Dec 30 09:24:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 09:24:47 2011] Initial guess for spatial extent in simple fitting = 6.23"
[Fri Dec 30 09:24:47 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.803
[Fri Dec 30 09:24:47 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 6.23"
[Sat Dec 31 00:06:03 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src22.ximg exists
[Sat Dec 31 00:06:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src22.csv
[Sat Dec 31 00:06:03 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Dec 31 00:06:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src22.csv
[Sat Dec 31 00:06:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 00:06:07 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Dec 31 00:06:07 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Dec 31 00:06:07 2011] Fit fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sat Dec 31 22:04:59 2011] Warning, spatial fit 22 centroid is now closest to src. 7
[Sat Dec 31 22:04:59 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:04:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:04:59 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 22:04:59 2011] Source does appear to be extended
[Sat Dec 31 22:04:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 22:06:09 2011] XMMSAS src. selection expression = ellipse(34297.918000, 25618.704000, 374.018411, 374.018411, 0.000000, X, Y)
[Sat Dec 31 22:06:09 2011] Writing source region out to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src25_src.reg
[Sat Dec 31 22:06:09 2011] Extracting stamp from image fullrun_mos1_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (373, 274) - (416, 317)
[Sat Dec 31 22:06:09 2011] XMMSAS bgd. selection expression = annulus(34297.918000, 25618.704000, 623.364018, 1246.728036, X, Y) && !ellipse(34057.499237, 27551.416321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34097.268921, 26673.666290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34185.070600, 25541.361400, 997.384029, 997.384029, 0.000000, X, Y) && !ellipse(34914.524109, 26724.998627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34399.934000, 26380.580000, 1576.360045, 1101.712032, 91.795000, X, Y) && !ellipse(33950.846710, 24751.241882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34590.934000, 27672.259800, 892.800026, 892.800026, 0.000000, X, Y) && !ellipse(34881.994690, 25451.325317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34344.896000, 23397.472000, 1335.632038, 1335.632038, 0.000000, X, Y)
[Sat Dec 31 22:06:09 2011] Writing fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src25.gif
[Sat Dec 31 22:57:14 2011] Mean detx,y = (-1317.00, 7039.60) 
[Sat Dec 31 22:57:16 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 22:57:34 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 22:57:34 2011] Setting source spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Dec 31 22:57:34 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Jan  1 13:13:41 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:41 2012] Error reading totcts from fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Jan  1 13:13:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:47 2012] Using photon index=1.80, rate=0.0223, arf fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src25.arf
[Sun Jan  1 13:13:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:47 2012] Updating source flux to 3.7e-13
[Sun Jan  1 13:14:04 2012] Flag c found in src. 25 procflags, skipping spectral fitting