[Wed Dec 28 14:51:15 2011] Detection parameters:
  Position = (393.6, 363.8) = 5 34 6.79 22 4 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.8 +/- 20.2
  Background counts = 138.4
  Rate = 0.03 +/- 0.004

[Wed Dec 28 14:51:22 2011] Off-axis axis estimate = 8.37'
[Wed Dec 28 15:04:31 2011] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 15:04:31 2011] Initial guess for spatial extent in simple fitting = 10.61"
[Wed Dec 28 15:04:31 2011] source mask rpix=2.4, npix_max = 34, mask sum = 20, frac = 0.578
[Wed Dec 28 15:04:31 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 10.61"
[Thu Dec 29 11:51:37 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src19.ximg exists
[Thu Dec 29 11:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src19.csv
[Thu Dec 29 11:51:37 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Dec 29 11:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src19.csv
[Thu Dec 29 11:51:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 11:51:39 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Dec 29 11:51:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Dec 29 11:51:39 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Dec 29 11:51:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Dec 29 11:51:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:23:38 2011] Warning, spatial fit 19 centroid is now closest to src. 2
[Fri Dec 30 09:23:38 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:23:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:23:38 2011] Assessing source extent using major
[Fri Dec 30 09:23:38 2011] Source does appear to be extended
[Fri Dec 30 09:23:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:23:38 2011] Source is confused with source 2
[Fri Dec 30 09:24:47 2011] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 09:24:47 2011] Initial guess for spatial extent in simple fitting = 10.61"
[Fri Dec 30 09:24:47 2011] source mask rpix=2.4, npix_max = 34, mask sum = 20, frac = 0.578
[Fri Dec 30 09:24:47 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 10.61"
[Sat Dec 31 00:06:03 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src17.ximg exists
[Sat Dec 31 00:06:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src17.csv
[Sat Dec 31 00:06:03 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Dec 31 00:06:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src17.csv
[Sat Dec 31 00:06:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 00:06:07 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Dec 31 00:06:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Dec 31 00:06:07 2011] fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Dec 31 00:06:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Dec 31 00:06:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 22:04:58 2011] Spatial fit model total counts = 1895.830000, observed total counts = 1893.000000
[Sat Dec 31 22:04:58 2011] Offset between fit and detection position for source 19 = 4.756979 pixels
[Sat Dec 31 22:04:58 2011] Warning, changing simple spatial fit ID from 17 to 2
[Sat Dec 31 22:04:58 2011] 1631.532000 total counts/ 1097.850000 bgd. counts: snr = 16.106866
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 4.756979 pixels
  Position = (398.0, 365.6) = 5 34 5.42 22 4 21.9
  Extent = 17.2 (17.1-34.3)", rotation angle = 0
  Source counts = 533.7 +/- 40.4
  Background counts = 1097.8
  Rate = 0.1 +/- 0.008
[Sat Dec 31 22:04:59 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:04:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:04:59 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 22:04:59 2011] Source does appear to be extended
[Sat Dec 31 22:04:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 22:06:09 2011] XMMSAS src. selection expression = ellipse(34579.356200, 31759.798800, 1030.338030, 1030.338030, 0.000000, X, Y)
[Sat Dec 31 22:06:09 2011] Writing source region out to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src19_src.reg
[Sat Dec 31 22:06:09 2011] Extracting stamp from image fullrun_mos1_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (339, 306) - (457, 425)
[Sat Dec 31 22:06:09 2011] XMMSAS bgd. selection expression = annulus(34579.356200, 31759.798800, 1717.230049, 3434.460099, X, Y) && !ellipse(34780.202000, 31775.930000, 686.890420, 686.890420, 0.000000, X, Y) && !ellipse(31240.295000, 34021.036400, 1671.936048, 1671.936048, 0.000000, X, Y) && !ellipse(34057.499237, 27551.416321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34112.256561, 29091.386414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30421.839068, 34062.009087, 1694.936049, 700.030960, 359.920322, X, Y) && !ellipse(34331.128800, 30739.554600, 1334.480038, 1334.480038, 0.000000, X, Y) && !ellipse(34174.830292, 28317.025879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27986.458000, 35585.164000, 3387.120097, 3387.120097, 0.000000, X, Y) && !ellipse(35442.006760, 28183.261200, 539.829616, 539.829616, 0.000000, X, Y) && !ellipse(34012.000000, 27960.155426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34819.406000, 30501.578000, 598.825617, 598.825617, 0.000000, X, Y) && !ellipse(34486.671800, 29097.121000, 1653.160048, 1653.160048, 0.000000, X, Y) && !ellipse(34590.934000, 27672.259800, 892.800026, 892.800026, 0.000000, X, Y) && !ellipse(32216.921417, 34662.410492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32613.566864, 34666.196564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33180.577576, 34228.031769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32387.942400, 34011.400600, 1644.552047, 1644.552047, 0.000000, X, Y) && !ellipse(35098.408783, 31348.002014, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 31 22:06:09 2011] Writing fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src19.gif
[Sat Dec 31 22:35:46 2011] Mean detx,y = (4762.38, 7112.21) 
[Sat Dec 31 22:35:48 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 22:36:20 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 22:36:21 2011] Setting source spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Dec 31 22:36:21 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Jan  1 13:13:41 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:41 2012] Error reading totcts from fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jan  1 13:13:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:13:46 2012] Using photon index=1.80, rate=0.105, arf fullrun_mos1_xmm0153750501_pi300-10000_pass1_cl_src19.arf
[Sun Jan  1 13:13:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:13:46 2012] Updating source flux to 1.6e-12
[Sun Jan  1 13:14:04 2012] Flag c found in src. 19 procflags, skipping spectral fitting