[Sat May 11 11:04:23 2013] Detection parameters:
  Position = (330.0, 502.6) = 5 34 26.71 22 14 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.0 +/- 22.9
  Background counts = 97.5
  Rate = 0.01 +/- 0.002

[Sat May 11 11:04:28 2013] Off-axis axis estimate = 14.98'
[Sat May 11 17:42:08 2013] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Sat May 11 17:42:08 2013] Initial guess for spatial extent in simple fitting = 13.92"
[Sat May 11 17:42:08 2013] source mask rpix=3.2, npix_max = 54, mask sum = 45, frac = 0.822
[Sat May 11 17:42:08 2013] Giving source the simple spatial ID 95 for pass 0, mean size = 13.92"
[Sat May 11 23:37:09 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src95.ximg exists
[Sat May 11 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src95.csv
[Sat May 11 23:37:09 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src95_1.ximg exists
[Sat May 11 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src95.csv
[Sat May 11 23:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 23:37:11 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Sat May 11 23:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src95.csv
[Sat May 11 23:37:11 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Sat May 11 23:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src95.csv
[Sat May 11 23:37:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 23:38:00 2013] Warning, spatial fit 95 centroid is now closest to src. 10
[Sat May 11 23:38:01 2013] Vigneting correction estimate = 1.000000
[Sat May 11 23:38:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 23:38:01 2013] Assessing source extent using major
[Sat May 11 23:38:01 2013] Source does appear to be extended
[Sat May 11 23:38:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 23:38:01 2013] Source is confused with source 10
[Sun May 12 07:58:51 2013] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Sun May 12 07:58:51 2013] Initial guess for spatial extent in simple fitting = 13.92"
[Sun May 12 07:58:51 2013] source mask rpix=3.2, npix_max = 54, mask sum = 45, frac = 0.822
[Sun May 12 07:58:51 2013] Giving source the simple spatial ID 92 for pass 1, mean size = 13.92"
[Sun May 12 14:18:05 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src92.ximg exists
[Sun May 12 14:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src92.csv
[Sun May 12 14:18:05 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src92_1.ximg exists
[Sun May 12 14:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src92.csv
[Sun May 12 14:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:18:08 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src92.ximg exists
[Sun May 12 14:18:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src92.csv
[Sun May 12 14:18:08 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src92_1.ximg exists
[Sun May 12 14:18:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src92.csv
[Sun May 12 14:18:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:18:57 2013] Source 7 is offset by -5.752923 and 3.861640 pixels which is larger than
2 X fitted extent = 1.527572 x 1.527572, not incorporating fit results
[Sun May 12 14:18:57 2013] Warning: source 92 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.577009 pixels away
[Sun May 12 14:18:57 2013] Vigneting correction estimate = 1.000000
[Sun May 12 14:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 14:18:57 2013] Assessing source extent using major
[Sun May 12 14:18:57 2013] Source does appear to be extended
[Sun May 12 14:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 18:29:56 2013] XMMSAS src. selection expression = ellipse(28658.685669, 43676.152649, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 18:29:56 2013] Writing source region out to fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src7_src.reg
[Sun May 12 18:29:56 2013] Extracting stamp from image fullrun_mos2_xmm0153750301_pi300-10000_cl_sm2.00.img.gz, (292, 465) - (367, 540)
[Sun May 12 18:29:56 2013] XMMSAS bgd. selection expression = annulus(28658.685669, 43676.152649, 1087.500000, 2175.000000, X, Y) && !ellipse(28233.620789, 41109.347321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28447.653320, 41530.610199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28040.954000, 42244.900000, 2945.736085, 1743.936050, 249.194000, X, Y) && !ellipse(27929.234955, 41620.703308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.584000, 43296.482000, 1696.304049, 1696.304049, 0.000000, X, Y) && !ellipse(27700.135132, 41094.423401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28285.064636, 43799.136261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27816.836400, 40218.686000, 2010.856058, 2010.856058, 0.000000, X, Y) && !ellipse(27570.829160, 43062.676000, 2202.216063, 743.518421, 90.033013, X, Y) && !ellipse(27765.443542, 43948.980804, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 18:29:56 2013] Writing fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src7.gif
[Sun May 12 19:06:33 2013] Mean detx,y = (-544.98, 16170.03) 
[Sun May 12 19:06:34 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 19:06:45 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 19:06:45 2013] Setting source spectrum file to fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May 12 19:06:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun May 12 20:35:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 20:35:09 2013] rmf not generated due to insufficient counts
[Sun May 12 20:41:06 2013] Updating aperture counts using extracted products
[Sun May 12 20:41:06 2013] Total counts from fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 1265.00
[Sun May 12 20:41:06 2013] Total counts from fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src7_bgd.pi.gz = 390.00
[Sun May 12 20:41:06 2013] Got source and background scale factors 1114646.000000, 1064957.000000
[Sun May 12 20:41:06 2013] User source parameters:
  Position = (330.0, 502.6) = 5 34 26.71 22 14 15.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 856.8 +/- 36.6
  Background aperture counts = 408.2
  Rate = 0.09 +/- 0.004

[Sun May 12 20:41:06 2013] Updating counts from extracted products
[Sun May 12 20:41:06 2013] Set source signif. to 856.80/20.20 = 42.41
[Sun May 12 20:41:09 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 20:41:09 2013] Using photon index=1.80, rate=0.086, arf fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src7.arf
[Sun May 12 20:41:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 20:41:09 2013] Updating source flux to 5e-12
[Sun May 12 20:41:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 20:41:58 2013] xmm0153750301/analysis//spectral/fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete