[Sat May 11 11:04:25 2013] Detection parameters:
  Position = (394.6, 363.0) = 5 34 6.51 22 4 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 273.3 +/- 25.2
  Background counts = 202.8
  Rate = 0.04 +/- 0.004

[Sat May 11 11:04:28 2013] Off-axis axis estimate = 8.39'
[Sat May 11 17:42:08 2013] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Sat May 11 17:42:08 2013] Initial guess for spatial extent in simple fitting = 10.63"
[Sat May 11 17:42:08 2013] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.837
[Sat May 11 17:42:08 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 10.63"
[Sat May 11 23:37:07 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src34.ximg exists
[Sat May 11 23:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src34.csv
[Sat May 11 23:37:07 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src34_1.ximg exists
[Sat May 11 23:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src34.csv
[Sat May 11 23:37:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 23:37:10 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sat May 11 23:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sat May 11 23:37:10 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sat May 11 23:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sat May 11 23:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 23:38:00 2013] Warning, spatial fit 34 centroid is now closest to src. 55
[Sat May 11 23:38:00 2013] Vigneting correction estimate = 1.000000
[Sat May 11 23:38:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 23:38:00 2013] Assessing source extent using major
[Sat May 11 23:38:00 2013] Source does appear to be extended
[Sat May 11 23:38:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 23:38:01 2013] Source is confused with source 54
[Sat May 11 23:38:01 2013] Source is confused with source 51
[Sun May 12 07:58:51 2013] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Sun May 12 07:58:51 2013] Initial guess for spatial extent in simple fitting = 10.63"
[Sun May 12 07:58:51 2013] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.837
[Sun May 12 07:58:51 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 10.63"
[Sun May 12 14:18:03 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src33.ximg exists
[Sun May 12 14:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src33.csv
[Sun May 12 14:18:03 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src33_1.ximg exists
[Sun May 12 14:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src33.csv
[Sun May 12 14:18:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:18:06 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sun May 12 14:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sun May 12 14:18:06 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sun May 12 14:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sun May 12 14:18:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:18:57 2013] Warning, spatial fit 33 centroid is now closest to src. 54
[Sun May 12 14:18:57 2013] Spatial fit model total counts = 3253.250000, observed total counts = 3171.000000
[Sun May 12 14:18:57 2013] Offset between fit and detection position for source 52 = 2.659213 pixels
[Sun May 12 14:18:57 2013] Warning, changing simple spatial fit ID from 33 to 54
[Sun May 12 14:18:57 2013] 3189.972000 total counts/ 2478.190000 bgd. counts: snr = 14.298145
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 2.659213 pixels
  Position = (393.9, 360.4) = 5 34 6.71 22 3 59.3
  Extent = 21.4 (21.4-42.9)", rotation angle = 0
  Source counts = 711.8 +/- 56.5
  Background counts = 2478.2
  Rate = 0.07 +/- 0.006
[Sun May 12 14:18:57 2013] Vigneting correction estimate = 1.000000
[Sun May 12 14:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 14:18:57 2013] Assessing source extent using major axis lower bound
[Sun May 12 14:18:57 2013] Source does appear to be extended
[Sun May 12 14:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 18:29:53 2013] XMMSAS src. selection expression = ellipse(34223.596000, 31305.058600, 1285.764037, 1285.764037, 0.000000, X, Y)
[Sun May 12 18:29:53 2013] Writing source region out to fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src52_src.reg
[Sun May 12 18:29:53 2013] Extracting stamp from image fullrun_mos2_xmm0153750301_pi300-10000_cl_sm2.00.img.gz, (320, 286) - (468, 434)
[Sun May 12 18:29:53 2013] XMMSAS bgd. selection expression = annulus(34223.596000, 31305.058600, 2142.940062, 4285.880123, X, Y) && !ellipse(28242.560000, 37546.532000, 2146.112062, 887.280026, 74.071000, X, Y) && !ellipse(29666.260000, 34357.360000, 1686.056049, 286.664808, 2.039650, X, Y) && !ellipse(34299.539673, 30006.004181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34178.433167, 26998.381683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34096.233459, 26222.236969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30032.007400, 34974.340600, 1686.056049, 480.612014, 356.536850, X, Y) && !ellipse(34133.725128, 28184.157593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34228.761902, 29397.476776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30856.752563, 34247.665710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34879.623749, 28836.222168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34682.224976, 26832.320221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34745.512909, 28149.591766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35383.195190, 27267.864502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34750.395508, 31184.444244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34590.334412, 31972.998566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35194.074799, 29487.028259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34821.122833, 30318.171906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35196.777618, 32298.284790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35036.443054, 30748.313202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35319.527588, 28834.738007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.489105, 34292.527740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35291.378967, 26595.796936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34509.902954, 32927.162994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30190.212769, 34314.691925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35329.641400, 30001.718000, 1691.384049, 477.345614, 0.018531, X, Y) && !ellipse(32380.752655, 34077.889862, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 18:29:53 2013] Writing fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src52.gif
[Sun May 12 18:45:22 2013] Mean detx,y = (-7245.44, 4123.30) 
[Sun May 12 18:45:23 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 18:45:45 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 18:45:46 2013] Setting source spectrum file to fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sun May 12 18:45:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sun May 12 20:40:56 2013] Updating aperture counts using extracted products
[Sun May 12 20:40:56 2013] Total counts from fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 5211.00
[Sun May 12 20:40:56 2013] Total counts from fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src52_bgd.pi.gz = 16623.00
[Sun May 12 20:40:56 2013] Got source and background scale factors 2999046.000000, 17997666.000000
[Sun May 12 20:40:56 2013] User source parameters:
  Position = (393.9, 360.4) = 5 34 6.71 22 3 59.3
  Extent = 21.4 (21.4-42.9)", rotation angle = 0
  Source aperture counts = 2441.0 +/- 73.2
  Background aperture counts = 2770.0
  Rate = 0.2 +/- 0.007

[Sun May 12 20:41:08 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 20:41:08 2013] Using photon index=1.80, rate=0.0714, arf fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src52.arf
[Sun May 12 20:41:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 20:41:08 2013] Updating source flux to 1.7e-12
[Sun May 12 20:41:43 2013] Flag c found in src. 52 procflags, skipping spectral fitting
[Sun May 12 20:41:58 2013] xmm0153750301/analysis//spectral/fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete