[Sat May 11 11:04:25 2013] Detection parameters:
  Position = (341.9, 395.4) = 5 34 22.98 22 6 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 392.9 +/- 27.7
  Background counts = 286.8
  Rate = 0.06 +/- 0.004

[Sat May 11 11:04:28 2013] Off-axis axis estimate = 7.70'
[Sat May 11 17:42:08 2013] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Sat May 11 17:42:08 2013] Initial guess for spatial extent in simple fitting = 10.28"
[Sat May 11 17:42:08 2013] source mask rpix=2.4, npix_max = 32, mask sum = 21, frac = 0.640
[Sat May 11 17:42:08 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.28"
[Sat May 11 23:37:06 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src9.ximg exists
[Sat May 11 23:37:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src9.csv
[Sat May 11 23:37:06 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat May 11 23:37:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src9.csv
[Sat May 11 23:37:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 23:37:09 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat May 11 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat May 11 23:37:09 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May 11 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat May 11 23:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 23:38:00 2013] Warning, spatial fit 9 centroid is now closest to src. 33
[Sat May 11 23:38:00 2013] Spatial fit model total counts = 3391.710000, observed total counts = 3439.000000
[Sat May 11 23:38:00 2013] Offset between fit and detection position for source 44 = 0.352443 pixels
[Sat May 11 23:38:00 2013] Warning, changing simple spatial fit ID from 9 to 24
[Sat May 11 23:38:00 2013] 3314.775000 total counts/ 3198.440000 bgd. counts: snr = 2.057033
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.352443 pixels
  Position = (341.5, 395.5) = 5 34 23.10 22 6 32.1
  Extent = 21.1 (13.3-42.2)" x 3.6 (2.6-5.2)", rotation angle = 2 (354-20) degrees
  Source counts = 116.3 +/- 57.6
  Background counts = 3198.4
  Rate = 0.01 +/- 0.006
[Sat May 11 23:38:00 2013] Vigneting correction estimate = 1.000000
[Sat May 11 23:38:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 23:38:00 2013] Assessing source extent using major axis lower bound
[Sat May 11 23:38:00 2013] Source does appear to be extended
[Sat May 11 23:38:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.58
[Sat May 11 23:38:00 2013] Source is asymmetric
[Sat May 11 23:38:01 2013] Source is confused with source 39
[Sun May 12 07:58:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 07:58:51 2013] Initial guess for spatial extent in simple fitting = 12.33"
[Sun May 12 07:58:51 2013] source mask rpix=2.8, npix_max = 44, mask sum = 34, frac = 0.765
[Sun May 12 07:58:51 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 12.33"
[Sun May 12 14:18:02 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src9.ximg exists
[Sun May 12 14:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src9.csv
[Sun May 12 14:18:03 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun May 12 14:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src9.csv
[Sun May 12 14:18:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:18:05 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun May 12 14:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun May 12 14:18:05 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun May 12 14:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun May 12 14:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:18:57 2013] Warning, spatial fit 9 centroid is now closest to src. 33
[Sun May 12 14:18:57 2013] Vigneting correction estimate = 1.000000
[Sun May 12 14:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 14:18:57 2013] Assessing source extent using major axis lower bound
[Sun May 12 14:18:57 2013] Source does appear to be extended
[Sun May 12 14:18:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.58
[Sun May 12 14:18:57 2013] Source is asymmetric
[Sun May 12 18:29:52 2013] XMMSAS src. selection expression = ellipse(29666.260000, 34357.360000, 1264.542036, 214.998606, 2.039650, X, Y)
[Sun May 12 18:29:52 2013] Writing source region out to fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src44_src.reg
[Sun May 12 18:29:52 2013] Extracting stamp from image fullrun_mos2_xmm0153750301_pi300-10000_cl_sm2.00.img.gz, (269, 323) - (414, 468)
[Sun May 12 18:29:52 2013] XMMSAS bgd. selection expression = annulus(29666.260000, 34357.360000, 2107.570061, 4215.140121, X, Y) && !ellipse(27843.862000, 34940.924000, 445.568813, 445.568813, 0.000000, X, Y) && !ellipse(27215.208000, 34359.566000, 1639.024047, 532.224015, 87.222910, X, Y) && !ellipse(28113.816000, 34641.900000, 1639.024047, 1249.592036, 86.346990, X, Y) && !ellipse(28041.425873, 36474.263550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.560000, 37546.532000, 2146.112062, 887.280026, 74.071000, X, Y) && !ellipse(27263.256000, 35308.222000, 1714.952049, 594.451217, 91.193000, X, Y) && !ellipse(27919.680000, 36126.032000, 1337.672038, 499.437614, 101.226100, X, Y) && !ellipse(28604.031891, 34357.581268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34299.539673, 30006.004181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27917.313873, 38149.767578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26577.729462, 35109.650177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28046.324402, 38835.091705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30032.007400, 34974.340600, 1686.056049, 480.612014, 356.536850, X, Y) && !ellipse(28717.120209, 34858.933105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27379.764000, 36681.514000, 1792.040052, 363.644810, 93.848300, X, Y) && !ellipse(28003.720200, 35837.912200, 1034.656030, 586.609617, 55.044000, X, Y) && !ellipse(25679.859619, 34436.342712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.854000, 37742.028200, 1815.208052, 330.904810, 89.931000, X, Y) && !ellipse(34228.761902, 29397.476776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34223.596000, 31305.058600, 1714.352049, 1714.352049, 0.000000, X, Y) && !ellipse(24683.751038, 34489.692871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30856.752563, 34247.665710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34750.395508, 31184.444244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27440.839661, 37616.098724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27490.052060, 38373.900000, 1890.960054, 252.932807, 92.288460, X, Y) && !ellipse(27568.023529, 35783.403687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34590.334412, 31972.998566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27816.836400, 40218.686000, 2010.856058, 2010.856058, 0.000000, X, Y) && !ellipse(27504.220520, 38753.441589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25050.062775, 34400.136078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.489105, 34292.527740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34509.902954, 32927.162994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30190.212769, 34314.691925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35329.641400, 30001.718000, 1691.384049, 477.345614, 0.018531, X, Y) && !ellipse(32380.752655, 34077.889862, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 18:29:52 2013] Writing fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src44.gif
[Sun May 12 18:37:51 2013] Mean detx,y = (-2065.71, 6979.11) 
[Sun May 12 18:37:52 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 18:38:11 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 18:38:11 2013] Setting source spectrum file to fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun May 12 18:38:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sun May 12 20:40:53 2013] Updating aperture counts using extracted products
[Sun May 12 20:40:53 2013] Total counts from fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 1995.00
[Sun May 12 20:40:53 2013] Total counts from fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src44_bgd.pi.gz = 13083.00
[Sun May 12 20:40:53 2013] Got source and background scale factors 838724.000000, 12128728.000000
[Sun May 12 20:40:53 2013] User source parameters:
  Position = (341.5, 395.5) = 5 34 23.10 22 6 32.1
  Extent = 21.1 (13.3-42.2)" x 3.6 (2.6-5.2)", rotation angle = 2 (354-20) degrees
  Source aperture counts = 1090.3 +/- 45.7
  Background aperture counts = 904.7
  Rate = 0.1 +/- 0.005

[Sun May 12 20:41:07 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 20:41:07 2013] Using photon index=1.80, rate=0.0117, arf fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src44.arf
[Sun May 12 20:41:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 20:41:07 2013] Updating source flux to 2.8e-13
[Sun May 12 20:41:43 2013] Flag c found in src. 44 procflags, skipping spectral fitting
[Sun May 12 20:41:58 2013] xmm0153750301/analysis//spectral/fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete