[Sat May 11 11:04:25 2013] Detection parameters:
  Position = (278.4, 397.3) = 5 34 42.87 22 6 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 338.8 +/- 26.4
  Background counts = 247.7
  Rate = 0.05 +/- 0.004

[Sat May 11 11:04:28 2013] Off-axis axis estimate = 7.32'
[Sat May 11 17:42:08 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Sat May 11 17:42:08 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Sat May 11 17:42:08 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.787
[Sat May 11 17:42:08 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 10.09"
[Sat May 11 23:37:07 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src18.ximg exists
[Sat May 11 23:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src18.csv
[Sat May 11 23:37:07 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat May 11 23:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src18.csv
[Sat May 11 23:37:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 23:37:09 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat May 11 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat May 11 23:37:09 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat May 11 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat May 11 23:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 23:38:00 2013] Source 36 is offset by -1.732607 and 5.366415 pixels which is larger than
2 X fitted extent = 1.159425 x 1.159425, not incorporating fit results
[Sat May 11 23:38:00 2013] Vigneting correction estimate = 1.000000
[Sat May 11 23:38:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 23:38:00 2013] Assessing source extent using major
[Sat May 11 23:38:00 2013] Source does appear to be extended
[Sat May 11 23:38:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 23:38:01 2013] Source is confused with source 35
[Sun May 12 07:58:51 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Sun May 12 07:58:51 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Sun May 12 07:58:51 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.787
[Sun May 12 07:58:51 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 10.09"
[Sun May 12 14:18:03 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src17.ximg exists
[Sun May 12 14:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src17.csv
[Sun May 12 14:18:03 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun May 12 14:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src17.csv
[Sun May 12 14:18:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:18:06 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun May 12 14:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun May 12 14:18:06 2013] fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun May 12 14:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun May 12 14:18:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:18:57 2013] Warning, spatial fit 17 centroid is now closest to src. 35
[Sun May 12 14:18:57 2013] Source 36 is offset by -1.056801 and 6.070714 pixels which is larger than
2 X fitted extent = 1.553366 x 1.553366, not incorporating fit results
[Sun May 12 14:18:57 2013] Vigneting correction estimate = 1.000000
[Sun May 12 14:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 14:18:57 2013] Assessing source extent using major
[Sun May 12 14:18:57 2013] Source does appear to be extended
[Sun May 12 14:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 18:29:52 2013] XMMSAS src. selection expression = ellipse(24169.968353, 34520.430145, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 18:29:52 2013] Writing source region out to fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src36_src.reg
[Sun May 12 18:29:52 2013] Extracting stamp from image fullrun_mos2_xmm0153750301_pi300-10000_cl_sm2.00.img.gz, (241, 360) - (316, 435)
[Sun May 12 18:29:52 2013] XMMSAS bgd. selection expression = annulus(24169.968353, 34520.430145, 1087.500000, 2175.000000, X, Y) && !ellipse(27215.208000, 34359.566000, 1639.024047, 532.224015, 87.222910, X, Y) && !ellipse(28242.560000, 37546.532000, 2146.112062, 887.280026, 74.071000, X, Y) && !ellipse(27263.256000, 35308.222000, 1714.952049, 594.451217, 91.193000, X, Y) && !ellipse(26577.729462, 35109.650177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27379.764000, 36681.514000, 1792.040052, 363.644810, 93.848300, X, Y) && !ellipse(25679.859619, 34436.342712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.854000, 37742.028200, 1815.208052, 330.904810, 89.931000, X, Y) && !ellipse(23325.400879, 34533.532715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24683.751038, 34489.692871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27490.052060, 38373.900000, 1890.960054, 252.932807, 92.288460, X, Y) && !ellipse(25050.062775, 34400.136078, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 18:29:52 2013] Writing fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src36.gif
[Sun May 12 18:40:33 2013] Mean detx,y = (3378.38, 6926.09) 
[Sun May 12 18:40:34 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 18:40:45 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 18:40:45 2013] Setting source spectrum file to fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sun May 12 18:40:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sun May 12 19:36:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 19:36:05 2013] rmf not generated due to insufficient counts
[Sun May 12 20:40:54 2013] Updating aperture counts using extracted products
[Sun May 12 20:40:54 2013] Total counts from fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 1700.00
[Sun May 12 20:40:54 2013] Total counts from fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src36_bgd.pi.gz = 4916.00
[Sun May 12 20:40:54 2013] Got source and background scale factors 932360.000000, 4079165.000000
[Sun May 12 20:40:54 2013] User source parameters:
  Position = (278.4, 397.3) = 5 34 42.87 22 6 45.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 576.4 +/- 42.2
  Background aperture counts = 1123.6
  Rate = 0.06 +/- 0.004

[Sun May 12 20:40:54 2013] Updating counts from extracted products
[Sun May 12 20:40:54 2013] Set source signif. to 576.37/33.52 = 17.19
[Sun May 12 20:41:08 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 20:41:08 2013] Using photon index=1.80, rate=0.0579, arf fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src36.arf
[Sun May 12 20:41:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 20:41:08 2013] Updating source flux to 1.5e-12
[Sun May 12 20:41:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 20:41:58 2013] xmm0153750301/analysis//spectral/fullrun_mos2_xmm0153750301_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete