[Sat May 11 11:04:19 2013] Detection parameters:
  Position = (394.0, 265.2) = 5 34 6.72 21 57 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.1 +/- 27.4
  Background counts = 225.0
  Rate = 0.03 +/- 0.004

[Sat May 11 11:04:22 2013] Off-axis axis estimate = 7.33'
[Sat May 11 11:07:03 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Sat May 11 11:07:03 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Sat May 11 11:07:03 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.131
[Sat May 11 11:07:03 2013] Giving source the simple spatial ID 85 for pass 0, mean size = 10.10"
[Sat May 11 17:42:04 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_src85.ximg exists
[Sat May 11 17:42:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_src85.csv
[Sat May 11 17:42:04 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_src85_1.ximg exists
[Sat May 11 17:42:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_src85.csv
[Sat May 11 17:42:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 17:42:07 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Sat May 11 17:42:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src85.csv
[Sat May 11 17:42:07 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Sat May 11 17:42:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src85.csv
[Sat May 11 17:42:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 23:37:38 2013] Warning, spatial fit 85 centroid is now closest to src. 69
[Sat May 11 23:37:38 2013] Vigneting correction estimate = 1.000000
[Sat May 11 23:37:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 23:37:38 2013] Assessing source extent using major
[Sat May 11 23:37:38 2013] Source does appear to be extended
[Sat May 11 23:37:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 23:37:38 2013] Source is confused with source 128
[Sat May 11 23:38:21 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Sat May 11 23:38:21 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Sat May 11 23:38:21 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.131
[Sat May 11 23:38:21 2013] Giving source the simple spatial ID 80 for pass 1, mean size = 10.10"
[Sun May 12 07:58:47 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_src80.ximg exists
[Sun May 12 07:58:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_src80.csv
[Sun May 12 07:58:47 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_src80_1.ximg exists
[Sun May 12 07:58:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_src80.csv
[Sun May 12 07:58:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 07:58:50 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Sun May 12 07:58:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sun May 12 07:58:50 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Sun May 12 07:58:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sun May 12 07:58:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:18:36 2013] Warning, spatial fit 80 centroid is now closest to src. 69
[Sun May 12 14:18:36 2013] Vigneting correction estimate = 1.000000
[Sun May 12 14:18:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 14:18:36 2013] Assessing source extent using major
[Sun May 12 14:18:36 2013] Source does appear to be extended
[Sun May 12 14:18:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 14:19:24 2013] XMMSAS src. selection expression = ellipse(34227.306946, 23024.485168, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 14:19:24 2013] Writing source region out to fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src91_src.reg
[Sun May 12 14:19:24 2013] Extracting stamp from image fullrun_mos1_xmm0153750301_pi300-10000_cl_sm2.00.img.gz, (356, 228) - (431, 303)
[Sun May 12 14:19:24 2013] XMMSAS bgd. selection expression = annulus(34227.306946, 23024.485168, 1087.500000, 2175.000000, X, Y) && !ellipse(35159.681549, 25446.745392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34410.679800, 24735.712000, 2571.992074, 1183.792034, 91.383020, X, Y) && !ellipse(34473.042000, 25795.182000, 1585.080046, 1585.080046, 0.000000, X, Y) && !ellipse(34077.486000, 24884.528000, 1633.712047, 1633.712047, 0.000000, X, Y) && !ellipse(34774.231600, 24705.986400, 1623.888047, 365.560011, 87.300200, X, Y) && !ellipse(34351.708000, 23515.747800, 1652.232048, 1259.632036, 89.748176, X, Y) && !ellipse(34907.950256, 23336.881226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35148.636627, 25954.923309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34892.516571, 24308.409546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33859.534943, 22098.815842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35676.116000, 26516.480000, 1643.368047, 528.193615, 87.586630, X, Y) && !ellipse(35679.426000, 25481.926000, 1666.192048, 614.348818, 86.859510, X, Y) && !ellipse(35624.506000, 25209.544000, 1645.640047, 565.456016, 93.710100, X, Y) && !ellipse(35563.041565, 24925.507385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34777.333435, 23807.726776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34552.046234, 22489.589691, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 14:19:24 2013] Writing fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src91.gif
[Sun May 12 15:37:13 2013] Mean detx,y = (-3895.33, 7094.97) 
[Sun May 12 15:37:14 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 15:37:26 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 15:37:26 2013] Setting source spectrum file to fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Sun May 12 15:37:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Sun May 12 18:01:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 18:01:49 2013] rmf not generated due to insufficient counts
[Sun May 12 20:40:44 2013] Updating aperture counts using extracted products
[Sun May 12 20:40:44 2013] Total counts from fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src91_src_b10.pi.gz = 2296.00
[Sun May 12 20:40:44 2013] Total counts from fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src91_bgd.pi.gz = 3064.00
[Sun May 12 20:40:44 2013] Got source and background scale factors 1221056.000000, 2640541.000000
[Sun May 12 20:40:44 2013] User source parameters:
  Position = (394.0, 265.2) = 5 34 6.72 21 57 5.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 879.1 +/- 48.9
  Background aperture counts = 1416.9
  Rate = 0.1 +/- 0.006

[Sun May 12 20:40:44 2013] Updating counts from extracted products
[Sun May 12 20:40:44 2013] Set source signif. to 879.13/37.64 = 23.36
[Sun May 12 20:40:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 20:40:51 2013] Using photon index=1.80, rate=0.1, arf fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src91.arf
[Sun May 12 20:40:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 20:40:51 2013] Updating source flux to 1.9e-12
[Sun May 12 20:41:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 20:41:43 2013] xmm0153750301/analysis//spectral/fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src91_pl.csv not found, spectral fit skipped or did not complete