[Sat May 11 11:04:16 2013] Detection parameters:
  Position = (392.7, 293.8) = 5 34 7.12 21 59 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 399.6 +/- 30.9
  Background counts = 201.3
  Rate = 0.07 +/- 0.005

[Sat May 11 11:04:22 2013] Off-axis axis estimate = 6.84'
[Sat May 11 11:07:03 2013] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Sat May 11 11:07:03 2013] Initial guess for spatial extent in simple fitting = 9.85"
[Sat May 11 11:07:03 2013] source mask rpix=2.3, npix_max = 30, mask sum = 29, frac = 0.949
[Sat May 11 11:07:03 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 9.85"
[Sat May 11 17:42:03 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_src18.ximg exists
[Sat May 11 17:42:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_src18.csv
[Sat May 11 17:42:03 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat May 11 17:42:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_src18.csv
[Sat May 11 17:42:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 17:42:05 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat May 11 17:42:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat May 11 17:42:05 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat May 11 17:42:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat May 11 17:42:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750301_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 23:37:38 2013] Warning, spatial fit 18 centroid is now closest to src. 22
[Sat May 11 23:37:38 2013] Vigneting correction estimate = 1.000000
[Sat May 11 23:37:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 23:37:38 2013] Assessing source extent using major
[Sat May 11 23:37:38 2013] Source does appear to be extended
[Sat May 11 23:37:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 23:37:38 2013] Source is confused with source 14
[Sat May 11 23:37:38 2013] Source is confused with source 22
[Sat May 11 23:37:38 2013] Source is confused with source 48
[Sat May 11 23:38:21 2013] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Sat May 11 23:38:21 2013] Initial guess for spatial extent in simple fitting = 9.85"
[Sat May 11 23:38:21 2013] source mask rpix=2.3, npix_max = 30, mask sum = 29, frac = 0.949
[Sat May 11 23:38:21 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 9.85"
[Sun May 12 07:58:46 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_src18.ximg exists
[Sun May 12 07:58:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_src18.csv
[Sun May 12 07:58:46 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun May 12 07:58:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_src18.csv
[Sun May 12 07:58:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 07:58:48 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun May 12 07:58:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun May 12 07:58:48 2013] fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun May 12 07:58:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun May 12 07:58:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153750301_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:18:36 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 10.404741 pixels away
[Sun May 12 14:18:36 2013] Spatial fit model total counts = 4588.480000, observed total counts = 4631.000000
[Sun May 12 14:18:36 2013] Offset between fit and detection position for source 23 = 7.245351 pixels
[Sun May 12 14:18:36 2013] Warning, changing simple spatial fit ID from 18 to 59
[Sun May 12 14:18:36 2013] 4047.890000 total counts/ 3460.640000 bgd. counts: snr = 9.982626
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 7.245351 pixels
  Position = (392.3, 286.6) = 5 34 7.25 21 58 38.3
  Extent = 20.4 (20.4-20.5)", rotation angle = 0
  Source counts = 587.2 +/- 63.6
  Background counts = 3460.6
  Rate = 0.07 +/- 0.007
[Sun May 12 14:18:36 2013] Vigneting correction estimate = 1.000000
[Sun May 12 14:18:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 14:18:36 2013] Assessing source extent using major axis lower bound
[Sun May 12 14:18:36 2013] Source does appear to be extended
[Sun May 12 14:18:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 14:19:20 2013] XMMSAS src. selection expression = ellipse(34077.486000, 24884.528000, 1225.284035, 1225.284035, 0.000000, X, Y)
[Sun May 12 14:19:20 2013] Writing source region out to fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src23_src.reg
[Sun May 12 14:19:20 2013] Extracting stamp from image fullrun_mos1_xmm0153750301_pi300-10000_cl_sm2.00.img.gz, (322, 216) - (463, 357)
[Sun May 12 14:19:20 2013] XMMSAS bgd. selection expression = annulus(34077.486000, 24884.528000, 2042.140059, 4084.280118, X, Y) && !ellipse(34246.003662, 28400.154846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34200.488495, 27957.550842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34412.848000, 26534.672000, 1265.328036, 1265.328036, 0.000000, X, Y) && !ellipse(35102.149719, 26721.743561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35159.681549, 25446.745392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34410.679800, 24735.712000, 2571.992074, 1183.792034, 91.383020, X, Y) && !ellipse(34403.308838, 29536.618896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34248.815338, 29092.541351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34473.042000, 25795.182000, 1585.080046, 1585.080046, 0.000000, X, Y) && !ellipse(36513.898000, 29449.744000, 1748.200050, 1722.344050, 356.694000, X, Y) && !ellipse(35194.114624, 28575.588562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35214.523834, 27544.534485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34774.231600, 24705.986400, 1623.888047, 365.560011, 87.300200, X, Y) && !ellipse(34351.708000, 23515.747800, 1652.232048, 1259.632036, 89.748176, X, Y) && !ellipse(34907.950256, 23336.881226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35287.300842, 29363.614532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35148.636627, 25954.923309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34892.516571, 24308.409546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33859.534943, 22098.815842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27504.119000, 18776.508000, 2494.056072, 624.553618, 103.004800, X, Y) && !ellipse(35676.116000, 26516.480000, 1643.368047, 528.193615, 87.586630, X, Y) && !ellipse(35679.426000, 25481.926000, 1666.192048, 614.348818, 86.859510, X, Y) && !ellipse(34227.306946, 23024.485168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29327.676056, 19972.615280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36246.865601, 28622.378143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35624.506000, 25209.544000, 1645.640047, 565.456016, 93.710100, X, Y) && !ellipse(35563.041565, 24925.507385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34777.333435, 23807.726776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34552.046234, 22489.589691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30637.372803, 19967.700821, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 14:19:20 2013] Writing fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src23.gif
[Sun May 12 14:49:53 2013] Mean detx,y = (-2015.16, 7140.50) 
[Sun May 12 14:49:54 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 14:50:21 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 14:50:21 2013] Setting source spectrum file to fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun May 12 14:50:21 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun May 12 20:40:34 2013] Updating aperture counts using extracted products
[Sun May 12 20:40:34 2013] Total counts from fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 6224.00
[Sun May 12 20:40:34 2013] Total counts from fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src23_bgd.pi.gz = 11866.00
[Sun May 12 20:40:34 2013] Got source and background scale factors 2767364.000000, 11153798.000000
[Sun May 12 20:40:34 2013] User source parameters:
  Position = (392.3, 286.6) = 5 34 7.25 21 58 38.3
  Extent = 20.4 (20.4-20.5)", rotation angle = 0
  Source aperture counts = 3279.9 +/- 79.9
  Background aperture counts = 2944.1
  Rate = 0.4 +/- 0.009

[Sun May 12 20:40:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 20:40:50 2013] Using photon index=1.80, rate=0.0671, arf fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src23.arf
[Sun May 12 20:40:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 20:40:50 2013] Updating source flux to 1.2e-12
[Sun May 12 20:41:12 2013] Flag c found in src. 23 procflags, skipping spectral fitting
[Sun May 12 20:41:43 2013] xmm0153750301/analysis//spectral/fullrun_mos1_xmm0153750301_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete