[Sat Aug 18 20:18:21 2012] Detection parameters:
  Position = (388.5, 229.9) = 12 59 16.60 27 53 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1241.0 +/- 52.6
  Background counts = 481.5
  Rate = 0.1 +/- 0.005

[Sat Aug 18 20:18:21 2012] Off-axis axis estimate = 8.20'
[Sat Aug 18 20:25:17 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 20:25:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 18 20:25:17 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Sat Aug 18 20:25:17 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.879
[Sat Aug 18 20:25:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.53"
[Sat Aug 18 20:38:22 2012] fullrun_pn_xmm0153750101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 18 20:38:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153750101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 18 20:38:22 2012] fullrun_pn_xmm0153750101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 18 20:38:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153750101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 18 20:38:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153750101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153750101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 20:38:22 2012] fullrun_pn_xmm0153750101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 18 20:38:22 2012] fullrun_pn_xmm0153750101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 18 20:38:22 2012] Fit fullrun_pn_xmm0153750101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug 18 20:55:24 2012] Spatial fit model total counts = 8799.470000, observed total counts = 8582.000000
[Sat Aug 18 20:55:24 2012] Offset between fit and detection position for source 1 = 0.154734 pixels
[Sat Aug 18 20:55:24 2012] 8771.920000 total counts/ 7957.770000 bgd. counts: snr = 9.126594
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.154734 pixels
  Position = (388.3, 229.9) = 12 59 16.65 27 53 46.9
  Extent = 5.0 (4.6-5.5)", rotation angle = 0
  Source counts = 814.1 +/- 93.7
  Background counts = 7957.8
  Rate = 0.04 +/- 0.004
[Sat Aug 18 20:55:24 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 20:55:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 20:55:24 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 20:55:24 2012] Source does appear to be extended
[Sat Aug 18 20:55:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 20:55:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 20:55:32 2012] Initial guess for spatial extent in simple fitting = 5.05"
[Sat Aug 18 20:55:32 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.088
[Sat Aug 18 20:55:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.05"
[Sat Aug 18 21:19:38 2012] fullrun_pn_xmm0153750101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 18 21:19:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153750101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 18 21:19:38 2012] fullrun_pn_xmm0153750101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 18 21:19:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153750101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 18 21:19:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153750101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153750101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 21:19:38 2012] fullrun_pn_xmm0153750101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 18 21:19:38 2012] fullrun_pn_xmm0153750101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 18 21:19:38 2012] Fit fullrun_pn_xmm0153750101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug 18 21:32:02 2012] Spatial fit model total counts = 6009.280000, observed total counts = 6005.000000
[Sat Aug 18 21:32:02 2012] Offset between fit and detection position for source 1 = 0.004129 pixels
[Sat Aug 18 21:32:02 2012] 5993.627000 total counts/ 5196.990000 bgd. counts: snr = 11.050566
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004129 pixels
  Position = (388.3, 229.9) = 12 59 16.65 27 53 46.9
  Extent = 5.0 (4.6-5.4)", rotation angle = 0
  Source counts = 796.6 +/- 77.4
  Background counts = 5197.0
  Rate = 0.04 +/- 0.004
[Sat Aug 18 21:32:02 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 21:32:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 21:32:02 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 21:32:02 2012] Source does appear to be extended
[Sat Aug 18 21:32:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 21:32:09 2012] XMMSAS src. selection expression = ellipse(33733.900000, 19953.588400, 298.542609, 298.542609, 0.000000, X, Y)
[Sat Aug 18 21:32:09 2012] Writing source region out to fullrun_pn_xmm0153750101_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug 18 21:32:09 2012] Extracting stamp from image fullrun_pn_xmm0153750101_pi300-10000_cl_sm2.00.img.gz, (371, 213) - (405, 247)
[Sat Aug 18 21:32:09 2012] XMMSAS bgd. selection expression = annulus(33733.900000, 19953.588400, 497.571014, 995.142029, X, Y)
[Sat Aug 18 21:32:09 2012] Writing fullrun_pn_xmm0153750101_pi300-10000_pass1_cl_src1.gif
[Sat Aug 18 21:32:29 2012] Mean detx,y = (-5093.02, -7487.20) 
[Sat Aug 18 21:32:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 21:32:44 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 21:32:45 2012] Setting source spectrum file to fullrun_pn_xmm0153750101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 18 21:32:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0153750101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug 18 22:16:29 2012] Updating aperture counts using extracted products
[Sat Aug 18 22:16:29 2012] Error reading totcts from fullrun_pn_xmm0153750101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 18 22:16:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 22:16:29 2012] Using photon index=1.80, rate=0.0377, arf fullrun_pn_xmm0153750101_pi300-10000_pass1_cl_src1.arf
[Sat Aug 18 22:16:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 22:16:29 2012] Updating source flux to 2.2e-13
[Sat Aug 18 22:18:45 2012] Reading fit data from xmm0153750101/analysis//spectral/fullrun_pn_xmm0153750101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Aug 18 22:18:45 2012] Spectral fit parameter nH value = 4.16295e+15
[Sat Aug 18 22:18:45 2012] Spectral fit parameter PhoIndex value = 2.09324
[Sat Aug 18 22:18:45 2012] Failed to get F(0.3-8.0) from xmm0153750101/analysis//spectral/fullrun_pn_xmm0153750101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Aug 18 22:18:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 22:18:45 2012] Using Nh = 4.2e+15, photon index=2.09, rate=0.0377, arf fullrun_pn_xmm0153750101_pi300-10000_pass1_cl_src1.arf
[Sat Aug 18 22:18:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 22:18:45 2012] Updating source flux to 1.8e-13