[Sat Jul 21 21:45:35 2012] Detection parameters:
  Position = (92.8, 320.0) = 22 37 3.37 13 46 30.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.0 +/- 14.4
  Background counts = 16.1
  Rate = 0.01 +/- 0.001

[Sat Jul 21 21:45:35 2012] Off-axis axis estimate = 14.99'
[Sat Jul 21 22:06:49 2012] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 22:06:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 22:06:49 2012] Initial guess for spatial extent in simple fitting = 13.92"
[Sat Jul 21 22:06:49 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.022
[Sat Jul 21 22:06:49 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 13.92"
[Sat Jul 21 22:15:04 2012] fullrun_mos2_xmm0153220601_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jul 21 22:15:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153220601_pi300-10000_cl_pass0_src2.csv
[Sat Jul 21 22:15:04 2012] fullrun_mos2_xmm0153220601_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jul 21 22:15:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153220601_pi300-10000_cl_pass0_src2.csv
[Sat Jul 21 22:15:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153220601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153220601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 22:15:04 2012] fullrun_mos2_xmm0153220601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jul 21 22:15:04 2012] fullrun_mos2_xmm0153220601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jul 21 22:15:04 2012] Fit fullrun_mos2_xmm0153220601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Jul 21 22:15:09 2012] Spatial fit model total counts = 125.993000, observed total counts = 114.000000
[Sat Jul 21 22:15:09 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 21 22:15:09 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 22:15:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 22:15:09 2012] Assessing source extent using major
[Sat Jul 21 22:15:09 2012] Source does appear to be extended
[Sat Jul 21 22:15:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 22:28:10 2012] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 22:28:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 22:28:10 2012] Initial guess for spatial extent in simple fitting = 13.92"
[Sat Jul 21 22:28:10 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.022
[Sat Jul 21 22:28:10 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 13.92"
[Sat Jul 21 22:37:34 2012] fullrun_mos2_xmm0153220601_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jul 21 22:37:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153220601_pi300-10000_cl_pass1_src2.csv
[Sat Jul 21 22:37:34 2012] fullrun_mos2_xmm0153220601_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jul 21 22:37:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153220601_pi300-10000_cl_pass1_src2.csv
[Sat Jul 21 22:37:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153220601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153220601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 22:37:34 2012] fullrun_mos2_xmm0153220601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jul 21 22:37:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153220601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jul 21 22:37:35 2012] fullrun_mos2_xmm0153220601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jul 21 22:37:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153220601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jul 21 22:37:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153220601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153220601_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 22:37:38 2012] Spatial fit model total counts = 130.870000, observed total counts = 114.000000
[Sat Jul 21 22:37:38 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 21 22:37:38 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 22:37:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 22:37:38 2012] Assessing source extent using major
[Sat Jul 21 22:37:38 2012] Source does appear to be extended
[Sat Jul 21 22:37:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 22:55:19 2012] XMMSAS src. selection expression = ellipse(8024.723251, 27788.438751, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 21 22:55:19 2012] Writing source region out to fullrun_mos2_xmm0153220601_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 21 22:55:19 2012] Extracting stamp from image fullrun_mos2_xmm0153220601_pi300-10000_cl_sm2.00.img.gz, (55, 282) - (130, 357)
[Sat Jul 21 22:55:19 2012] XMMSAS bgd. selection expression = annulus(8024.723251, 27788.438751, 1087.500000, 2175.000000, X, Y) && !ellipse(8671.629200, 28762.955200, 388.721611, 226.492007, 88.120630, X, Y)
[Sat Jul 21 22:55:19 2012] Writing fullrun_mos2_xmm0153220601_pi300-10000_pass1_cl_src2.gif
[Sat Jul 21 22:55:36 2012] Mean detx,y = (-16176.91, 2901.23) 
[Sat Jul 21 22:55:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 22:55:53 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 22:55:53 2012] Setting source spectrum file to fullrun_mos2_xmm0153220601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 21 22:55:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153220601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 21 23:00:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 21 23:00:03 2012] rmf not generated due to insufficient counts
[Sat Jul 21 23:00:41 2012] Updating aperture counts using extracted products
[Sat Jul 21 23:00:41 2012] Error reading totcts from fullrun_mos2_xmm0153220601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 21 23:00:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 23:00:41 2012] Using photon index=1.80, rate=0.00955, arf fullrun_mos2_xmm0153220601_pi300-10000_pass1_cl_src2.arf
[Sat Jul 21 23:00:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 23:00:41 2012] Updating source flux to 2.6e-13
[Sat Jul 21 23:00:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting