[Mon Jun 11 10:51:47 2012] Detection parameters:
  Position = (287.8, 276.7) = 6 29 24.77 -5 45 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2604.7 +/- 60.4
  Background counts = 3.5
  Rate = 0.4 +/- 0.009

[Mon Jun 11 10:51:47 2012] Off-axis axis estimate = 1.75'
[Mon Jun 11 11:01:33 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 11:01:33 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Mon Jun 11 11:01:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Mon Jun 11 11:01:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Mon Jun 11 11:07:10 2012] fullrun_mos2_xmm0153100601_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 11 11:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153100601_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 11:07:10 2012] fullrun_mos2_xmm0153100601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 11 11:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153100601_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 11:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153100601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153100601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 11:07:10 2012] fullrun_mos2_xmm0153100601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 11 11:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153100601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 11 11:07:10 2012] fullrun_mos2_xmm0153100601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 11 11:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153100601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 11 11:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153100601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153100601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 11:07:13 2012] Source 1 is offset by 6.529669 and 5.461554 pixels which is larger than
2 X fitted extent = 0.839554 x 0.839554, not incorporating fit results
[Mon Jun 11 11:07:13 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 11:07:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 11:07:13 2012] Assessing source extent using major
[Mon Jun 11 11:07:13 2012] Source does appear to be extended
[Mon Jun 11 11:07:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 11:12:21 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 11:12:21 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Mon Jun 11 11:12:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Mon Jun 11 11:12:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Mon Jun 11 11:17:09 2012] fullrun_mos2_xmm0153100601_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 11 11:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153100601_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 11:17:09 2012] fullrun_mos2_xmm0153100601_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 11 11:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153100601_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 11:17:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153100601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153100601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 11:17:09 2012] fullrun_mos2_xmm0153100601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 11 11:17:09 2012] fullrun_mos2_xmm0153100601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 11 11:17:09 2012] Fit fullrun_mos2_xmm0153100601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 11 11:17:11 2012] Spatial fit model total counts = 2389.880000, observed total counts = 2274.000000
[Mon Jun 11 11:17:11 2012] Offset between fit and detection position for source 1 = 0.169349 pixels
[Mon Jun 11 11:17:11 2012] 2368.825000 total counts/ 606.615000 bgd. counts: snr = 71.548592
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.169349 pixels
  Position = (287.8, 276.6) = 6 29 24.76 -5 45 24.0
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 1762.2 +/- 48.7
  Background counts = 606.6
  Rate = 0.2 +/- 0.005
[Mon Jun 11 11:17:11 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 11:17:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 11:17:11 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 11:17:11 2012] Source does appear to be extended
[Mon Jun 11 11:17:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 11:28:12 2012] Counts = 1762.210000, rescaling region sizes by 2.000000
[Mon Jun 11 11:28:12 2012] XMMSAS src. selection expression = ellipse(24993.704760, 24013.797600, 610.705218, 610.705218, 0.000000, X, Y)
[Mon Jun 11 11:28:12 2012] Writing source region out to fullrun_mos2_xmm0153100601_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 11 11:28:12 2012] Extracting stamp from image fullrun_mos2_xmm0153100601_pi300-10000_cl_sm2.00.img.gz, (253, 241) - (323, 312)
[Mon Jun 11 11:28:12 2012] XMMSAS bgd. selection expression = annulus(24993.704760, 24013.797600, 2035.684059, 4071.368117, X, Y) && !ellipse(26905.131560, 24196.181800, 337.338410, 337.338410, 0.000000, X, Y)
[Mon Jun 11 11:28:12 2012] Writing fullrun_mos2_xmm0153100601_pi300-10000_pass1_cl_src1.gif
[Mon Jun 11 11:28:13 2012] Mean detx,y = (80.27, 185.73) 
[Mon Jun 11 11:28:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 11:28:21 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 11:28:21 2012] Setting source spectrum file to fullrun_mos2_xmm0153100601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 11 11:28:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153100601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 11 11:32:01 2012] Updating aperture counts using extracted products
[Mon Jun 11 11:32:01 2012] Error reading totcts from fullrun_mos2_xmm0153100601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 11 11:32:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 11:32:01 2012] Using photon index=1.80, rate=0.193, arf fullrun_mos2_xmm0153100601_pi300-10000_pass1_cl_src1.arf
[Mon Jun 11 11:32:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 11:32:01 2012] Updating source flux to 2.1e-12
[Mon Jun 11 11:32:08 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Mon Jun 11 11:32:15 2012] Reading fit data from xmm0153100601/analysis//spectral/fullrun_mos2_xmm0153100601_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jun 11 11:32:15 2012] Spectral fit parameter nH value = 3.27532e+21
[Mon Jun 11 11:32:15 2012] Spectral fit parameter PhoIndex value = 2.22604
[Mon Jun 11 11:32:15 2012] Failed to get F(0.3-8.0) from xmm0153100601/analysis//spectral/fullrun_mos2_xmm0153100601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jun 11 11:32:15 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 11:32:15 2012] Using Nh = 3.3e+21, photon index=2.23, rate=0.193, arf fullrun_mos2_xmm0153100601_pi300-10000_pass1_cl_src1.arf
[Mon Jun 11 11:32:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 11:32:15 2012] Updating source flux to 2.2e-12