[Thu May 24 12:46:45 2012] Detection parameters:
  Position = (282.3, 293.0) = 1 56 20.76 5 37 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 351.0 +/- 28.1
  Background counts = 100.6
  Rate = 0.03 +/- 0.003

[Thu May 24 12:46:45 2012] Off-axis axis estimate = 1.23'
[Thu May 24 12:47:44 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Thu May 24 12:47:44 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Thu May 24 12:47:44 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Thu May 24 12:47:44 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.04"
[Thu May 24 12:55:01 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 24 12:55:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_src2.csv
[Thu May 24 12:55:01 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 24 12:55:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_src2.csv
[Thu May 24 12:55:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 12:55:01 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 24 12:55:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 24 12:55:01 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 24 12:55:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 24 12:55:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 12:55:03 2012] Spatial fit model total counts = 1073.620000, observed total counts = 970.000000
[Thu May 24 12:55:03 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 24 12:55:03 2012] Vigneting correction estimate = 1.000000
[Thu May 24 12:55:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 12:55:03 2012] Assessing source extent using major
[Thu May 24 12:55:03 2012] Source does appear to be extended
[Thu May 24 12:55:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 12:55:06 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Thu May 24 12:55:06 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Thu May 24 12:55:06 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Thu May 24 12:55:06 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.04"
[Thu May 24 13:01:25 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 24 13:01:25 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 24 13:01:25 2012] Fit fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu May 24 13:01:25 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 24 13:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 24 13:01:25 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 24 13:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 24 13:01:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:01:27 2012] Spatial fit model total counts = 1054.960000, observed total counts = 970.000000
[Thu May 24 13:01:27 2012] Offset between fit and detection position for source 2 = 0.320839 pixels
[Thu May 24 13:01:27 2012] 1034.073000 total counts/ 849.767000 bgd. counts: snr = 6.322510
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.320839 pixels
  Position = (282.3, 293.3) = 1 56 20.79 5 37 44.0
  Extent = 9.4" x 6.7", rotation angle = 297
  Source counts = 184.3 +/- 32.2
  Background counts = 849.8
  Rate = 0.03 +/- 0.005
[Thu May 24 13:01:27 2012] Vigneting correction estimate = 1.000000
[Thu May 24 13:01:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 13:01:27 2012] Assessing source extent using major
[Thu May 24 13:01:27 2012] Source does appear to be extended
[Thu May 24 13:01:27 2012] Computing asymmetry using major and minor axis, asym = 1.40
[Thu May 24 13:01:30 2012] XMMSAS src. selection expression = ellipse(24507.254905, 25469.283604, 565.054077, 404.318678, 296.756242, X, Y)
[Thu May 24 13:01:30 2012] Writing source region out to fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src2_src.reg
[Thu May 24 13:01:30 2012] Extracting stamp from image fullrun_mos2_xmm0153030201_pi300-10000_cl_sm2.00.img.gz, (250, 261) - (315, 326)
[Thu May 24 13:01:30 2012] XMMSAS bgd. selection expression = annulus(24507.254905, 25469.283604, 941.756795, 1883.513589, X, Y) && !ellipse(23523.803253, 25294.198029, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 13:01:30 2012] Writing fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src2.gif
[Thu May 24 13:01:46 2012] Mean detx,y = (17.02, -708.32) 
[Thu May 24 13:01:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 13:01:55 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 13:01:55 2012] Setting source spectrum file to fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 24 13:01:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 24 13:07:04 2012] Updating aperture counts using extracted products
[Thu May 24 13:07:04 2012] Error reading totcts from fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 24 13:07:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 13:07:05 2012] Using photon index=1.80, rate=0.0273, arf fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src2.arf
[Thu May 24 13:07:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 13:07:05 2012] Updating source flux to 2.9e-13
[Thu May 24 13:07:05 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Thu May 24 13:07:23 2012] Reading fit data from xmm0153030201/analysis//spectral/fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src2_pl.csv
[Thu May 24 13:07:23 2012] Spectral fit parameter nH value = 9.23952e+21
[Thu May 24 13:07:23 2012] Spectral fit parameter PhoIndex value = 7.58943
[Thu May 24 13:07:23 2012] Failed to get F(0.3-8.0) from xmm0153030201/analysis//spectral/fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu May 24 13:07:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 13:07:23 2012] Using Nh = 9.2e+21, photon index=7.59, rate=0.0273, arf fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src2.arf
[Thu May 24 13:07:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 13:07:23 2012] Updating source flux to 1.7e-13