[Thu May 24 12:46:45 2012] Detection parameters:
  Position = (402.0, 241.0) = 1 55 45.88 5 33 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.6 +/- 19.2
  Background counts = 78.0
  Rate = 0.01 +/- 0.002

[Thu May 24 12:46:45 2012] Off-axis axis estimate = 8.59'
[Thu May 24 12:47:44 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Thu May 24 12:47:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 12:47:44 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Thu May 24 12:47:44 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Thu May 24 12:47:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.72"
[Thu May 24 12:55:01 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 24 12:55:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_src1.csv
[Thu May 24 12:55:01 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 24 12:55:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_src1.csv
[Thu May 24 12:55:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 12:55:01 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 24 12:55:01 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 24 12:55:01 2012] Fit fullrun_mos2_xmm0153030201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 24 12:55:03 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.716967 pixels away
[Thu May 24 12:55:03 2012] Vigneting correction estimate = 1.000000
[Thu May 24 12:55:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 12:55:03 2012] Assessing source extent using major
[Thu May 24 12:55:03 2012] Source does appear to be extended
[Thu May 24 12:55:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 12:55:06 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Thu May 24 12:55:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 12:55:06 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Thu May 24 12:55:06 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Thu May 24 12:55:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.72"
[Thu May 24 13:01:25 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 24 13:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_src1.csv
[Thu May 24 13:01:25 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 24 13:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_src1.csv
[Thu May 24 13:01:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:01:25 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 24 13:01:25 2012] fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 24 13:01:25 2012] Fit fullrun_mos2_xmm0153030201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 24 13:01:27 2012] Spatial fit model total counts = 753.998000, observed total counts = 754.000000
[Thu May 24 13:01:27 2012] Offset between fit and detection position for source 1 = 0.262943 pixels
[Thu May 24 13:01:27 2012] 753.179800 total counts/ 679.239000 bgd. counts: snr = 2.837088
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.262943 pixels
  Position = (401.8, 240.8) = 1 55 45.95 5 33 55.7
  Extent = 6.0 (4.4-7.8)", rotation angle = 0
  Source counts = 73.9 +/- 27.4
  Background counts = 679.2
  Rate = 0.01 +/- 0.004
[Thu May 24 13:01:27 2012] Vigneting correction estimate = 1.000000
[Thu May 24 13:01:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 13:01:27 2012] Assessing source extent using major axis lower bound
[Thu May 24 13:01:27 2012] Source does appear to be extended
[Thu May 24 13:01:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 13:01:30 2012] XMMSAS src. selection expression = ellipse(34908.395800, 20905.009200, 358.900210, 358.900210, 0.000000, X, Y)
[Thu May 24 13:01:30 2012] Writing source region out to fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src1_src.reg
[Thu May 24 13:01:30 2012] Extracting stamp from image fullrun_mos2_xmm0153030201_pi300-10000_cl_sm2.00.img.gz, (381, 220) - (422, 261)
[Thu May 24 13:01:30 2012] XMMSAS bgd. selection expression = annulus(34908.395800, 20905.009200, 598.167017, 1196.334034, X, Y)
[Thu May 24 13:01:30 2012] Writing fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src1.gif
[Thu May 24 13:01:33 2012] Mean detx,y = (11347.92, 7.31) 
[Thu May 24 13:01:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 13:01:41 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 13:01:42 2012] Setting source spectrum file to fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 24 13:01:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 24 13:02:14 2012] Not generating rmf since there are only 73 counts
[Thu May 24 13:02:14 2012] rmf not generated due to insufficient counts
[Thu May 24 13:07:04 2012] Updating aperture counts using extracted products
[Thu May 24 13:07:04 2012] Error reading totcts from fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 24 13:07:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 13:07:04 2012] Using photon index=1.80, rate=0.011, arf fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src1.arf
[Thu May 24 13:07:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 13:07:05 2012] Updating source flux to 2.8e-13
[Thu May 24 13:07:05 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 24 13:07:23 2012] xmm0153030201/analysis//spectral/fullrun_mos2_xmm0153030201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete