[Mon May 27 15:25:09 2013] Detection parameters:
  Position = (199.2, 258.3) = 17 47 53.02 -30 5 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.7 +/- 15.1
  Background counts = 105.8
  Rate = 0.004 +/- 0.0005

[Mon May 27 15:25:10 2013] Off-axis axis estimate = 7.76'
[Mon May 27 15:34:55 2013] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Mon May 27 15:34:55 2013] Initial guess for spatial extent in simple fitting = 10.31"
[Mon May 27 15:34:55 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.093
[Mon May 27 15:34:55 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 10.31"
[Mon May 27 18:28:54 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src47.ximg exists
[Mon May 27 18:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src47.csv
[Mon May 27 18:28:54 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src47_1.ximg exists
[Mon May 27 18:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src47.csv
[Mon May 27 18:28:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 18:28:55 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Mon May 27 18:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Mon May 27 18:28:55 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Mon May 27 18:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Mon May 27 18:28:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:39:27 2013] Spatial fit model total counts = 1566.970000, observed total counts = 1143.000000
[Tue May 28 06:39:27 2013] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 06:39:27 2013] Spatial fit model total counts = 1227.280000, observed total counts = 1210.000000
[Tue May 28 06:39:27 2013] Offset between fit and detection position for source 56 = 1.674910 pixels
[Tue May 28 06:39:27 2013] Warning, changing simple spatial fit ID from 47 to 48
[Tue May 28 06:39:27 2013] 1236.492000 total counts/ 1182.970000 bgd. counts: snr = 1.556129
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 1.674910 pixels
  Position = (197.8, 259.3) = 17 47 53.48 -30 5 39.2
  Extent = 7.1 (4.1-12.3)", rotation angle = 0
  Source counts = 53.5 +/- 35.2
  Background counts = 1183.0
  Rate = 0.001 +/- 0.0007
  Deleting source due to low Poisson probability