[Mon May 27 15:25:08 2013] Detection parameters:
  Position = (295.2, 313.0) = 17 47 20.83 -30 1 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 603.4 +/- 49.2
  Background counts = 244.7
  Rate = 0.01 +/- 0.001

[Mon May 27 15:25:10 2013] Off-axis axis estimate = 1.08'
[Mon May 27 15:34:55 2013] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting
[Mon May 27 15:34:55 2013] Initial guess for spatial extent in simple fitting = 6.97"
[Mon May 27 15:34:55 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.905
[Mon May 27 15:34:55 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 6.97"
[Mon May 27 18:28:53 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src36.ximg exists
[Mon May 27 18:28:53 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src36_1.ximg exists
[Mon May 27 18:28:53 2013] Fit fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src36 appears to have run properly
[Mon May 27 18:28:54 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Mon May 27 18:28:54 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Mon May 27 18:28:54 2013] Fit fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Tue May 28 06:39:27 2013] Spatial fit model total counts = 12341.600000, observed total counts = 12337.000000
[Tue May 28 06:39:27 2013] Offset between fit and detection position for source 42 = 7.270668 pixels
[Tue May 28 06:39:27 2013] 11879.151000 total counts/ 11487.100000 bgd. counts: snr = 3.657947
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 7.270668 pixels
  Position = (301.0, 317.5) = 17 47 18.91 -30 1 26.2
  Extent = 13.9 (13.9-27.9)", rotation angle = 0
  Source counts = 392.1 +/- 109.0
  Background counts = 11487.1
  Rate = 0.008 +/- 0.002
[Tue May 28 06:39:27 2013] Vigneting correction estimate = 1.000000
[Tue May 28 06:39:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 06:39:27 2013] Assessing source extent using major axis lower bound
[Tue May 28 06:39:27 2013] Source does appear to be extended
[Tue May 28 06:39:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 06:40:22 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 28 06:40:22 2013] Initial guess for spatial extent in simple fitting = 13.94"
[Tue May 28 06:40:22 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.020
[Tue May 28 06:40:22 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 13.94"
[Tue May 28 11:08:47 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src28.ximg exists
[Tue May 28 11:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src28.csv
[Tue May 28 11:08:47 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue May 28 11:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src28.csv
[Tue May 28 11:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 11:08:48 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue May 28 11:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Tue May 28 11:08:48 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue May 28 11:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Tue May 28 11:08:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:07:42 2013] Warning, spatial fit 28 centroid is now closest to src. 34
[Tue May 28 16:07:42 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:07:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:07:42 2013] Assessing source extent using major axis lower bound
[Tue May 28 16:07:42 2013] Source does appear to be extended
[Tue May 28 16:07:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 16:08:05 2013] XMMSAS src. selection expression = ellipse(26134.166000, 27572.620000, 836.466024, 836.466024, 0.000000, X, Y)
[Tue May 28 16:08:05 2013] Writing source region out to fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src42_src.reg
[Tue May 28 16:08:05 2013] Extracting stamp from image fullrun_pn_xmm0152920101_pi300-10000_cl_sm2.00.img.gz, (253, 269) - (349, 366)
[Tue May 28 16:08:05 2013] XMMSAS bgd. selection expression = annulus(26134.166000, 27572.620000, 1394.110040, 2788.220080, X, Y) && !ellipse(24291.197800, 26071.942000, 1836.372053, 1704.386449, 327.137449, X, Y) && !ellipse(24328.083460, 29255.436200, 1977.256857, 1772.311251, 9.110439, X, Y) && !ellipse(27004.089996, 31656.712891, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27543.918518, 30149.497894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24530.845245, 24891.246887, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(26329.060000, 31763.264000, 1424.552041, 620.895218, 45.394000, X, Y) && !ellipse(27347.133057, 28841.654358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27149.734283, 28231.977325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28250.490000, 28133.270000, 528.680815, 329.060009, 25.980600, X, Y) && !ellipse(27277.706696, 27624.687164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.136627, 27606.420563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23327.312500, 27441.243225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27325.635284, 27180.800781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27319.289764, 25618.191254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27226.002655, 25018.202423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26207.121887, 24321.241302, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 16:08:05 2013] Writing fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src42.gif
[Tue May 28 18:05:34 2013] Mean detx,y = (-1230.11, 3171.73) 
[Tue May 28 18:05:37 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 18:05:57 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 18:05:57 2013] Setting source spectrum file to fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Tue May 28 18:05:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Wed May 29 13:16:28 2013] Updating aperture counts using extracted products
[Wed May 29 13:16:28 2013] Total counts from fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 9891.00
[Wed May 29 13:16:28 2013] Total counts from fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src42_bgd.pi.gz = 1445.00
[Wed May 29 13:16:28 2013] Got source and background scale factors 2108252.000000, 1013584.000000
[Wed May 29 13:16:28 2013] User source parameters:
  Position = (301.0, 317.5) = 17 47 18.91 -30 1 26.2
  Extent = 13.9 (13.9-27.9)", rotation angle = 0
  Source aperture counts = 6885.4 +/- 100.5
  Background aperture counts = 3005.6
  Rate = 0.1 +/- 0.002

[Wed May 29 13:16:32 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 13:16:32 2013] Using photon index=1.80, rate=0.00792, arf fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src42.arf
[Wed May 29 13:16:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 13:16:32 2013] Updating source flux to 5.7e-14
[Wed May 29 13:17:14 2013] xmm0152920101/analysis//spectral/fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete