[Mon May 27 15:25:08 2013] Detection parameters:
  Position = (314.9, 332.1) = 17 47 14.24 -30 0 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.8 +/- 26.5
  Background counts = 208.3
  Rate = 0.004 +/- 0.0008

[Mon May 27 15:25:10 2013] Off-axis axis estimate = 2.71'
[Mon May 27 15:34:55 2013] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Mon May 27 15:34:55 2013] Initial guess for spatial extent in simple fitting = 7.79"
[Mon May 27 15:34:55 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.763
[Mon May 27 15:34:55 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 7.79"
[Mon May 27 18:28:53 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src28.ximg exists
[Mon May 27 18:28:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src28.csv
[Mon May 27 18:28:53 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon May 27 18:28:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src28.csv
[Mon May 27 18:28:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 18:28:54 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon May 27 18:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon May 27 18:28:54 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon May 27 18:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon May 27 18:28:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:39:26 2013] Source 31 is offset by 5.347805 and -0.626095 pixels which is larger than
2 X fitted extent = 1.004841 x 1.004841, not incorporating fit results
[Tue May 28 06:39:27 2013] Vigneting correction estimate = 1.000000
[Tue May 28 06:39:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 06:39:27 2013] Assessing source extent using major
[Tue May 28 06:39:27 2013] Source does appear to be extended
[Tue May 28 06:39:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 06:39:27 2013] Source is confused with source 34
[Tue May 28 06:40:22 2013] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Tue May 28 06:40:22 2013] Initial guess for spatial extent in simple fitting = 7.79"
[Tue May 28 06:40:22 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.763
[Tue May 28 06:40:22 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 7.79"
[Tue May 28 11:08:47 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src21.ximg exists
[Tue May 28 11:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src21.csv
[Tue May 28 11:08:47 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue May 28 11:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src21.csv
[Tue May 28 11:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 11:08:48 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue May 28 11:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Tue May 28 11:08:48 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue May 28 11:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Tue May 28 11:08:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:07:42 2013] Source 31 is offset by 5.543529 and -0.610676 pixels which is larger than
2 X fitted extent = 0.954846 x 0.954846, not incorporating fit results
[Tue May 28 16:07:42 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:07:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:07:42 2013] Assessing source extent using major
[Tue May 28 16:07:42 2013] Source does appear to be extended
[Tue May 28 16:07:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 16:08:04 2013] XMMSAS src. selection expression = ellipse(27347.133057, 28841.654358, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 28 16:08:04 2013] Writing source region out to fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src31_src.reg
[Tue May 28 16:08:04 2013] Extracting stamp from image fullrun_pn_xmm0152920101_pi300-10000_cl_sm2.00.img.gz, (277, 295) - (352, 370)
[Tue May 28 16:08:04 2013] XMMSAS bgd. selection expression = annulus(27347.133057, 28841.654358, 1087.500000, 2175.000000, X, Y) && !ellipse(24291.197800, 26071.942000, 1836.372053, 1704.386449, 327.137449, X, Y) && !ellipse(24328.083460, 29255.436200, 1977.256857, 1772.311251, 9.110439, X, Y) && !ellipse(27004.089996, 31656.712891, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27543.918518, 30149.497894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24530.845245, 24891.246887, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(26329.060000, 31763.264000, 1424.552041, 620.895218, 45.394000, X, Y) && !ellipse(27149.734283, 28231.977325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28250.490000, 28133.270000, 528.680815, 329.060009, 25.980600, X, Y) && !ellipse(27277.706696, 27624.687164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.136627, 27606.420563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.166000, 27572.620000, 1115.288032, 1115.288032, 0.000000, X, Y) && !ellipse(27325.635284, 27180.800781, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 16:08:04 2013] Writing fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src31.gif
[Tue May 28 17:56:34 2013] Mean detx,y = (-2719.53, 4295.94) 
[Tue May 28 17:56:39 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 17:56:58 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 17:56:58 2013] Setting source spectrum file to fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue May 28 17:56:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed May 29 09:59:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 09:59:11 2013] rmf not generated due to insufficient counts
[Wed May 29 13:16:26 2013] Updating aperture counts using extracted products
[Wed May 29 13:16:26 2013] Total counts from fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 2193.00
[Wed May 29 13:16:26 2013] Total counts from fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 2014.00
[Wed May 29 13:16:26 2013] Got source and background scale factors 1086678.000000, 1868673.000000
[Wed May 29 13:16:26 2013] User source parameters:
  Position = (314.9, 332.1) = 17 47 14.24 -30 0 24.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1021.8 +/- 47.8
  Background aperture counts = 1171.2
  Rate = 0.02 +/- 0.001

[Wed May 29 13:16:26 2013] Updating counts from extracted products
[Wed May 29 13:16:26 2013] Set source signif. to 1021.81/34.22 = 29.86
[Wed May 29 13:16:32 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 13:16:32 2013] Using photon index=1.80, rate=0.0207, arf fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src31.arf
[Wed May 29 13:16:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 13:16:32 2013] Updating source flux to 1.9e-13
[Wed May 29 13:17:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 13:17:14 2013] xmm0152920101/analysis//spectral/fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete