[Mon May 27 15:25:07 2013] Detection parameters:
  Position = (284.0, 274.1) = 17 47 24.59 -30 4 35.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2851.1 +/- 72.8
  Background counts = 191.5
  Rate = 0.07 +/- 0.002

[Mon May 27 15:25:10 2013] Off-axis axis estimate = 2.05'
[Mon May 27 15:34:55 2013] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Mon May 27 15:34:55 2013] Initial guess for spatial extent in simple fitting = 7.46"
[Mon May 27 15:34:55 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.816
[Mon May 27 15:34:55 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 7.46"
[Mon May 27 18:28:53 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src13.ximg exists
[Mon May 27 18:28:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src13.csv
[Mon May 27 18:28:53 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon May 27 18:28:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src13.csv
[Mon May 27 18:28:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 18:28:54 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon May 27 18:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon May 27 18:28:54 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon May 27 18:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon May 27 18:28:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:39:26 2013] Spatial fit model total counts = 1564330.000000, observed total counts = 10171.000000
[Tue May 28 06:39:26 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 06:39:27 2013] Vigneting correction estimate = 1.000000
[Tue May 28 06:39:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 06:39:27 2013] Assessing source extent using major
[Tue May 28 06:39:27 2013] Source does appear to be extended
[Tue May 28 06:39:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 06:39:27 2013] Source is confused with source 16
[Tue May 28 06:40:22 2013] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Tue May 28 06:40:22 2013] Initial guess for spatial extent in simple fitting = 7.46"
[Tue May 28 06:40:22 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.816
[Tue May 28 06:40:22 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.46"
[Tue May 28 11:08:47 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src12.ximg exists
[Tue May 28 11:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src12.csv
[Tue May 28 11:08:47 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue May 28 11:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src12.csv
[Tue May 28 11:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 11:08:47 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue May 28 11:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue May 28 11:08:47 2013] fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue May 28 11:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue May 28 11:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:07:42 2013] Spatial fit model total counts = 1542970.000000, observed total counts = 10171.000000
[Tue May 28 16:07:42 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 16:07:42 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:07:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:07:42 2013] Assessing source extent using major
[Tue May 28 16:07:42 2013] Source does appear to be extended
[Tue May 28 16:07:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 16:08:04 2013] Counts = 2851.136475, rescaling region sizes by 2.000000
[Tue May 28 16:08:04 2013] XMMSAS src. selection expression = ellipse(24657.734406, 23795.327789, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 28 16:08:04 2013] Writing source region out to fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src14_src.reg
[Tue May 28 16:08:04 2013] Extracting stamp from image fullrun_pn_xmm0152920101_pi300-10000_cl_sm2.00.img.gz, (209, 199) - (359, 349)
[Tue May 28 16:08:04 2013] XMMSAS bgd. selection expression = annulus(24657.734406, 23795.327789, 4350.000000, 8700.000000, X, Y) && !ellipse(24291.197800, 26071.942000, 1836.372053, 1704.386449, 327.137449, X, Y) && !ellipse(24328.083460, 29255.436200, 1977.256857, 1772.311251, 9.110439, X, Y) && !ellipse(27004.089996, 31656.712891, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23988.328000, 33836.284000, 1545.928044, 671.220819, 82.539000, X, Y) && !ellipse(24091.950317, 32226.715820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27543.918518, 30149.497894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24530.845245, 24891.246887, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(26329.060000, 31763.264000, 1424.552041, 620.895218, 45.394000, X, Y) && !ellipse(17113.350510, 30385.041473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18798.805600, 28987.433400, 849.856024, 509.583215, 77.991957, X, Y) && !ellipse(27347.133057, 28841.654358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20536.526245, 28574.080505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27149.734283, 28231.977325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20042.445206, 28158.934814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28250.490000, 28133.270000, 528.680815, 329.060009, 25.980600, X, Y) && !ellipse(27277.706696, 27624.687164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19616.713913, 27674.514099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.136627, 27606.420563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23327.312500, 27441.243225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.166000, 27572.620000, 1115.288032, 1115.288032, 0.000000, X, Y) && !ellipse(27325.635284, 27180.800781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33278.476471, 27089.658936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27319.289764, 25618.191254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19675.240051, 24993.170807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21309.994690, 24852.549835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20239.972748, 24932.638794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27226.002655, 25018.202423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26207.121887, 24321.241302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.765259, 21282.314682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32433.707214, 21274.227463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30415.542320, 17906.991200, 506.905615, 506.905615, 0.000000, X, Y) && !ellipse(20907.390030, 16817.786011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22753.170380, 14319.327774, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 16:08:04 2013] Writing fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src14.gif
[Tue May 28 17:31:13 2013] Mean detx,y = (353.24, -148.49) 
[Tue May 28 17:31:23 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 17:33:42 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 17:33:42 2013] Setting source spectrum file to fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue May 28 17:33:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue May 28 18:47:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 18:47:52 2013] rmf not generated due to insufficient counts
[Wed May 29 13:16:24 2013] Updating aperture counts using extracted products
[Wed May 29 13:16:24 2013] Total counts from fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 22311.00
[Wed May 29 13:16:24 2013] Total counts from fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 102419.00
[Wed May 29 13:16:24 2013] Got source and background scale factors 4632696.000000, 120937803.000000
[Wed May 29 13:16:24 2013] User source parameters:
  Position = (284.0, 274.1) = 17 47 24.59 -30 4 35.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 18387.7 +/- 150.4
  Background aperture counts = 3923.3
  Rate = 0.4 +/- 0.003

[Wed May 29 13:16:24 2013] Updating counts from extracted products
[Wed May 29 13:16:24 2013] Set source signif. to 18387.69/62.64 = 293.56
[Wed May 29 13:16:32 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 13:16:32 2013] Using photon index=1.80, rate=0.372, arf fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src14.arf
[Wed May 29 13:16:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 13:16:32 2013] Updating source flux to 2.1e-12
[Wed May 29 13:17:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 13:17:14 2013] xmm0152920101/analysis//spectral/fullrun_pn_xmm0152920101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete