[Mon May 27 15:26:58 2013] Detection parameters:
  Position = (285.7, 218.1) = 17 47 24.00 -30 8 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.5 +/- 14.6
  Background counts = 62.9
  Rate = 0.002 +/- 0.0004

[Mon May 27 15:26:58 2013] Off-axis axis estimate = 5.90'
[Tue May 28 00:29:27 2013] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Tue May 28 00:29:27 2013] Initial guess for spatial extent in simple fitting = 9.38"
[Tue May 28 00:29:27 2013] source mask rpix=2.2, npix_max = 28, mask sum = 18, frac = 0.638
[Tue May 28 00:29:27 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 9.38"
[Tue May 28 06:39:02 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src30.ximg exists
[Tue May 28 06:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src30.csv
[Tue May 28 06:39:02 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue May 28 06:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src30.csv
[Tue May 28 06:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:39:03 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue May 28 06:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Tue May 28 06:39:03 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue May 28 06:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Tue May 28 06:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:40:01 2013] Spatial fit model total counts = 827.569000, observed total counts = 635.000000
[Tue May 28 06:40:01 2013] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 06:40:01 2013] Spatial fit model total counts = 834.422000, observed total counts = 757.000000
[Tue May 28 06:40:01 2013] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 06:40:01 2013] Vigneting correction estimate = 1.000000
[Tue May 28 06:40:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 06:40:01 2013] Assessing source extent using major
[Tue May 28 06:40:01 2013] Source does appear to be extended
[Tue May 28 06:40:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 06:40:01 2013] Deleting source due to low Poisson probability 0.9