[Mon May 27 15:26:56 2013] Detection parameters:
  Position = (286.9, 348.9) = 17 47 23.61 -29 59 14.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 579.4 +/- 42.8
  Background counts = 100.8
  Rate = 0.02 +/- 0.001

[Mon May 27 15:26:58 2013] Off-axis axis estimate = 3.75'
[Tue May 28 00:29:27 2013] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Tue May 28 00:29:27 2013] Initial guess for spatial extent in simple fitting = 8.30"
[Tue May 28 00:29:27 2013] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.905
[Tue May 28 00:29:27 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 8.30"
[Tue May 28 06:39:02 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src7.ximg exists
[Tue May 28 06:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src7.csv
[Tue May 28 06:39:02 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue May 28 06:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src7.csv
[Tue May 28 06:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:39:03 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue May 28 06:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue May 28 06:39:03 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue May 28 06:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue May 28 06:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:40:01 2013] Source 4 is offset by -3.430781 and -7.073470 pixels which is larger than
2 X fitted extent = 1.296023 x 1.309172, not incorporating fit results
[Tue May 28 06:40:01 2013] Vigneting correction estimate = 1.000000
[Tue May 28 06:40:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 06:40:01 2013] Assessing source extent using major
[Tue May 28 06:40:01 2013] Source does appear to be extended
[Tue May 28 06:40:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 14:45:32 2013] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Tue May 28 14:45:32 2013] Initial guess for spatial extent in simple fitting = 8.30"
[Tue May 28 14:45:32 2013] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.905
[Tue May 28 14:45:32 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 8.30"
[Tue May 28 16:07:30 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src7.ximg exists
[Tue May 28 16:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src7.csv
[Tue May 28 16:07:31 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue May 28 16:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src7.csv
[Tue May 28 16:07:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:07:31 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue May 28 16:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue May 28 16:07:31 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue May 28 16:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue May 28 16:07:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:07:52 2013] Spatial fit model total counts = 110093.000000, observed total counts = 9693.000000
[Tue May 28 16:07:52 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 16:07:52 2013] Source 4 is offset by 7.196139 and -4.005585 pixels which is larger than
2 X fitted extent = 3.675637 x 3.675637, not incorporating fit results
[Tue May 28 16:07:52 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:07:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:07:52 2013] Assessing source extent using major
[Tue May 28 16:07:52 2013] Source does appear to be extended
[Tue May 28 16:07:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:39:26 2013] XMMSAS src. selection expression = ellipse(24911.818054, 30302.154114, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 11:39:26 2013] Writing source region out to fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src4_src.reg
[Wed May 29 11:39:26 2013] Extracting stamp from image fullrun_mos2_xmm0152920101_pi300-10000_cl_sm2.00.img.gz, (249, 311) - (324, 386)
[Wed May 29 11:39:26 2013] XMMSAS bgd. selection expression = annulus(24911.818054, 30302.154114, 1087.500000, 2175.000000, X, Y) && !ellipse(24322.992000, 29266.686000, 1777.713651, 1777.713651, 0.000000, X, Y) && !ellipse(26517.884000, 31875.716000, 1254.976036, 1254.976036, 0.000000, X, Y) && !ellipse(24030.212921, 29475.359406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23704.870941, 29029.818939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27556.755585, 30151.361725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23286.913574, 27435.800415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25759.312000, 27377.544000, 1104.232032, 1104.232032, 0.000000, X, Y) && !ellipse(24561.550659, 31497.854523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23791.069122, 31320.190582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27449.826000, 27188.094000, 1202.168035, 1202.168035, 0.000000, X, Y)
[Wed May 29 11:39:26 2013] Writing fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src4.gif
[Wed May 29 11:58:32 2013] Mean detx,y = (314.04, -5860.02) 
[Wed May 29 11:58:33 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 11:58:40 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 11:58:40 2013] Setting source spectrum file to fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 29 11:58:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 29 12:32:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 12:32:04 2013] rmf not generated due to insufficient counts
[Wed May 29 13:16:39 2013] Updating aperture counts using extracted products
[Wed May 29 13:16:40 2013] Total counts from fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 6644.00
[Wed May 29 13:16:40 2013] Total counts from fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 2937.00
[Wed May 29 13:16:40 2013] Got source and background scale factors 1205440.000000, 1813015.000000
[Wed May 29 13:16:40 2013] User source parameters:
  Position = (286.9, 348.9) = 17 47 23.61 -29 59 14.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 4691.2 +/- 82.5
  Background aperture counts = 1952.8
  Rate = 0.09 +/- 0.002

[Wed May 29 13:16:40 2013] Updating counts from extracted products
[Wed May 29 13:16:40 2013] Set source signif. to 4691.24/44.19 = 106.16
[Wed May 29 13:16:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 13:16:43 2013] Using photon index=1.80, rate=0.0906, arf fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src4.arf
[Wed May 29 13:16:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 13:16:43 2013] Updating source flux to 2.1e-12
[Wed May 29 13:16:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 13:17:04 2013] xmm0152920101/analysis//spectral/fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete