[Mon May 27 15:26:57 2013] Detection parameters:
  Position = (319.7, 353.1) = 17 47 12.62 -29 58 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.5 +/- 16.5
  Background counts = 74.2
  Rate = 0.002 +/- 0.0005

[Mon May 27 15:26:58 2013] Off-axis axis estimate = 4.25'
[Tue May 28 00:29:27 2013] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Tue May 28 00:29:27 2013] Initial guess for spatial extent in simple fitting = 8.56"
[Tue May 28 00:29:27 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Tue May 28 00:29:27 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 8.56"
[Tue May 28 06:39:02 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src31.ximg exists
[Tue May 28 06:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src31.csv
[Tue May 28 06:39:02 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue May 28 06:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src31.csv
[Tue May 28 06:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:39:03 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue May 28 06:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue May 28 06:39:03 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue May 28 06:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue May 28 06:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:40:01 2013] Source 33 is offset by -4.926436 and -2.541732 pixels which is larger than
2 X fitted extent = 0.956478 x 0.956478, not incorporating fit results
[Tue May 28 06:40:01 2013] Warning, spatial fit 31 centroid is now closest to src. 18
[Tue May 28 06:40:01 2013] Vigneting correction estimate = 1.000000
[Tue May 28 06:40:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 06:40:01 2013] Assessing source extent using major
[Tue May 28 06:40:01 2013] Source does appear to be extended
[Tue May 28 06:40:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 06:40:01 2013] Deleting source due to low Poisson probability 0.9