[Mon May 27 15:26:57 2013] Detection parameters:
  Position = (283.2, 279.1) = 17 47 24.84 -30 4 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.8 +/- 26.1
  Background counts = 80.1
  Rate = 0.004 +/- 0.0005

[Mon May 27 15:26:58 2013] Off-axis axis estimate = 1.78'
[Tue May 28 00:29:27 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue May 28 00:29:27 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Tue May 28 00:29:27 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.630
[Tue May 28 00:29:27 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 7.32"
[Tue May 28 06:39:02 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src20.ximg exists
[Tue May 28 06:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src20.csv
[Tue May 28 06:39:02 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue May 28 06:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src20.csv
[Tue May 28 06:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:39:03 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue May 28 06:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue May 28 06:39:03 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue May 28 06:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue May 28 06:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:40:01 2013] Warning, spatial fit 20 centroid is now closest to src. 13
[Tue May 28 06:40:01 2013] Vigneting correction estimate = 1.000000
[Tue May 28 06:40:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 06:40:01 2013] Assessing source extent using major
[Tue May 28 06:40:01 2013] Source does appear to be extended
[Tue May 28 06:40:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 06:40:01 2013] Source is confused with source 13
[Tue May 28 14:45:32 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue May 28 14:45:32 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Tue May 28 14:45:32 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.630
[Tue May 28 14:45:32 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 7.32"
[Tue May 28 16:07:31 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src20.ximg exists
[Tue May 28 16:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src20.csv
[Tue May 28 16:07:31 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue May 28 16:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src20.csv
[Tue May 28 16:07:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:07:31 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue May 28 16:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Tue May 28 16:07:31 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue May 28 16:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Tue May 28 16:07:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:07:52 2013] Source 22 is offset by 3.992402 and -7.637751 pixels which is larger than
2 X fitted extent = 6.731402 x 3.242616, not incorporating fit results
[Tue May 28 16:07:52 2013] Source 22 is offset by 0.302218 and -5.501544 pixels which is larger than
2 X fitted extent = 0.866639 x 0.866639, not incorporating fit results
[Tue May 28 16:07:52 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:07:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:07:52 2013] Assessing source extent using major
[Tue May 28 16:07:52 2013] Source does appear to be extended
[Tue May 28 16:07:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:39:27 2013] XMMSAS src. selection expression = ellipse(24592.972931, 24232.645630, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 11:39:27 2013] Writing source region out to fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src22_src.reg
[Wed May 29 11:39:27 2013] Extracting stamp from image fullrun_mos2_xmm0152920101_pi300-10000_cl_sm2.00.img.gz, (246, 242) - (321, 317)
[Wed May 29 11:39:27 2013] XMMSAS bgd. selection expression = annulus(24592.972931, 24232.645630, 1087.500000, 2175.000000, X, Y) && !ellipse(24301.850000, 26078.320600, 1806.559252, 1167.796834, 2.469948, X, Y) && !ellipse(23877.893890, 26220.158081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25759.312000, 27377.544000, 1104.232032, 1104.232032, 0.000000, X, Y) && !ellipse(24930.865234, 23799.135101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23997.694122, 24062.426392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22025.500000, 24304.962000, 1264.608036, 1264.608036, 0.000000, X, Y) && !ellipse(27449.826000, 27188.094000, 1202.168035, 1202.168035, 0.000000, X, Y)
[Wed May 29 11:39:27 2013] Writing fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src22.gif
[Wed May 29 12:06:35 2013] Mean detx,y = (-175.33, -62.82) 
[Wed May 29 12:06:36 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 12:06:44 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 12:06:44 2013] Setting source spectrum file to fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed May 29 12:06:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed May 29 12:57:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 12:57:31 2013] rmf not generated due to insufficient counts
[Wed May 29 13:16:42 2013] Updating aperture counts using extracted products
[Wed May 29 13:16:42 2013] Total counts from fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 2039.00
[Wed May 29 13:16:42 2013] Total counts from fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 4272.00
[Wed May 29 13:16:42 2013] Got source and background scale factors 1158748.000000, 5545280.000000
[Wed May 29 13:16:42 2013] User source parameters:
  Position = (283.2, 279.1) = 17 47 24.84 -30 4 15.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1146.3 +/- 46.2
  Background aperture counts = 892.7
  Rate = 0.02 +/- 0.0009

[Wed May 29 13:16:42 2013] Updating counts from extracted products
[Wed May 29 13:16:42 2013] Set source signif. to 1146.32/29.88 = 38.37
[Wed May 29 13:16:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 13:16:43 2013] Using photon index=1.80, rate=0.0221, arf fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src22.arf
[Wed May 29 13:16:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 13:16:43 2013] Updating source flux to 4.3e-13
[Wed May 29 13:16:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 13:17:04 2013] xmm0152920101/analysis//spectral/fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete