[Mon May 27 15:26:56 2013] Detection parameters:
  Position = (275.0, 301.9) = 17 47 27.59 -30 2 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1638.0 +/- 83.1
  Background counts = 103.7
  Rate = 0.04 +/- 0.002

[Mon May 27 15:26:58 2013] Off-axis axis estimate = 1.72'
[Tue May 28 00:29:27 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue May 28 00:29:27 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Tue May 28 00:29:27 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Tue May 28 00:29:27 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.29"
[Tue May 28 06:39:01 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src5.ximg exists
[Tue May 28 06:39:02 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May 28 06:39:02 2013] Fit fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_src5 appears to have run properly
[Tue May 28 06:39:03 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May 28 06:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue May 28 06:39:03 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 28 06:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue May 28 06:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:40:01 2013] Warning, spatial fit 5 centroid is now closest to src. 1
[Tue May 28 06:40:01 2013] Vigneting correction estimate = 1.000000
[Tue May 28 06:40:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 06:40:01 2013] Assessing source extent using major
[Tue May 28 06:40:01 2013] Source does appear to be extended
[Tue May 28 06:40:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 06:40:01 2013] Source is confused with source 1
[Tue May 28 14:45:32 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue May 28 14:45:32 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Tue May 28 14:45:32 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Tue May 28 14:45:32 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.29"
[Tue May 28 16:07:30 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src5.ximg exists
[Tue May 28 16:07:30 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue May 28 16:07:30 2013] Fit fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_src5 appears to have run properly
[Tue May 28 16:07:31 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue May 28 16:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue May 28 16:07:31 2013] fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue May 28 16:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue May 28 16:07:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:07:52 2013] Warning, spatial fit 5 centroid is now closest to src. 1
[Tue May 28 16:07:52 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:07:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:07:52 2013] Assessing source extent using major
[Tue May 28 16:07:52 2013] Source does appear to be extended
[Tue May 28 16:07:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:39:26 2013] Counts = 1637.983398, rescaling region sizes by 2.000000
[Wed May 29 11:39:26 2013] XMMSAS src. selection expression = ellipse(23877.893890, 26220.158081, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 29 11:39:26 2013] Writing source region out to fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src14_src.reg
[Wed May 29 11:39:26 2013] Extracting stamp from image fullrun_mos2_xmm0152920101_pi300-10000_cl_sm2.00.img.gz, (200, 227) - (350, 377)
[Wed May 29 11:39:26 2013] XMMSAS bgd. selection expression = annulus(23877.893890, 26220.158081, 4350.000000, 8700.000000, X, Y) && !ellipse(24322.992000, 29266.686000, 1777.713651, 1777.713651, 0.000000, X, Y) && !ellipse(24301.850000, 26078.320600, 1806.559252, 1167.796834, 2.469948, X, Y) && !ellipse(26517.884000, 31875.716000, 1254.976036, 1254.976036, 0.000000, X, Y) && !ellipse(24030.212921, 29475.359406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23704.870941, 29029.818939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27556.755585, 30151.361725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24911.818054, 30302.154114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23286.913574, 27435.800415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25759.312000, 27377.544000, 1104.232032, 1104.232032, 0.000000, X, Y) && !ellipse(32443.392761, 21285.212646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24930.865234, 23799.135101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17116.411758, 30195.974182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28261.372200, 28151.302400, 281.607208, 214.191206, 13.532800, X, Y) && !ellipse(20563.040695, 34698.011780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24561.550659, 31497.854523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27102.278120, 21323.915600, 682.461620, 413.896812, 86.106526, X, Y) && !ellipse(23791.069122, 31320.190582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24592.972931, 24232.645630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23997.694122, 24062.426392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22025.500000, 24304.962000, 1264.608036, 1264.608036, 0.000000, X, Y) && !ellipse(27449.826000, 27188.094000, 1202.168035, 1202.168035, 0.000000, X, Y) && !ellipse(20792.602000, 26776.736000, 1341.064039, 1341.064039, 0.000000, X, Y)
[Wed May 29 11:39:26 2013] Writing fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src14.gif
[Wed May 29 11:54:56 2013] Mean detx,y = (-467.95, -1896.21) 
[Wed May 29 11:54:58 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 11:58:01 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 11:58:01 2013] Setting source spectrum file to fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed May 29 11:58:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed May 29 12:30:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 12:30:39 2013] rmf not generated due to insufficient counts
[Wed May 29 13:16:39 2013] Updating aperture counts using extracted products
[Wed May 29 13:16:39 2013] Total counts from fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 92070.00
[Wed May 29 13:16:39 2013] Total counts from fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 49150.00
[Wed May 29 13:16:39 2013] Got source and background scale factors 4963832.000000, 152366009.000000
[Wed May 29 13:16:39 2013] User source parameters:
  Position = (275.0, 301.9) = 17 47 27.59 -30 2 26.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 90468.8 +/- 304.4
  Background aperture counts = 1601.2
  Rate = 2 +/- 0.006

[Wed May 29 13:16:39 2013] Updating counts from extracted products
[Wed May 29 13:16:39 2013] Set source signif. to 90468.77/40.02 = 2260.85
[Wed May 29 13:16:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 13:16:43 2013] Using photon index=1.80, rate=1.75, arf fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src14.arf
[Wed May 29 13:16:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 13:16:43 2013] Updating source flux to 2.9e-11
[Wed May 29 13:16:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 13:17:04 2013] xmm0152920101/analysis//spectral/fullrun_mos2_xmm0152920101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete