[Mon May 27 15:26:14 2013] Detection parameters:
  Position = (310.8, 364.9) = 17 47 15.61 -29 57 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9475.1 +/- 114.6
  Background counts = 65.4
  Rate = 0.3 +/- 0.003

[Mon May 27 15:26:17 2013] Off-axis axis estimate = 4.90'
[Mon May 27 18:28:55 2013] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Mon May 27 18:28:55 2013] Initial guess for spatial extent in simple fitting = 8.88"
[Mon May 27 18:28:55 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.968
[Mon May 27 18:28:55 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.88"
[Tue May 28 00:29:23 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 28 00:29:23 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 28 00:29:23 2013] Fit fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue May 28 00:29:25 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 28 00:29:25 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 28 00:29:25 2013] Fit fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue May 28 06:39:48 2013] Spatial fit model total counts = 10728.700000, observed total counts = 9893.000000
[Tue May 28 06:39:48 2013] Offset between fit and detection position for source 7 = 0.126032 pixels
[Tue May 28 06:39:48 2013] 10452.210000 total counts/ 2295.370000 bgd. counts: snr = 170.253321
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.126032 pixels
  Position = (310.7, 364.9) = 17 47 15.65 -29 57 59.9
  Extent = 7.9 (7.5-8.1)" x 6.1 (6.0-6.2)", rotation angle = 16 (11-21) degrees
  Source counts = 8156.8 +/- 102.2
  Background counts = 2295.4
  Rate = 0.2 +/- 0.002
[Tue May 28 06:39:49 2013] Vigneting correction estimate = 1.000000
[Tue May 28 06:39:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 06:39:49 2013] Assessing source extent using major axis lower bound
[Tue May 28 06:39:49 2013] Source does appear to be extended
[Tue May 28 06:39:49 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.20
[Tue May 28 06:39:49 2013] Source is confused with source 24
[Tue May 28 11:08:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 28 11:08:48 2013] Initial guess for spatial extent in simple fitting = 6.98"
[Tue May 28 11:08:48 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.903
[Tue May 28 11:08:48 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 6.98"
[Tue May 28 14:45:31 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 28 14:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src3.csv
[Tue May 28 14:45:31 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 28 14:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src3.csv
[Tue May 28 14:45:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 14:45:32 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 28 14:45:32 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 28 14:45:32 2013] Fit fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue May 28 16:07:47 2013] Spatial fit model total counts = 11001.000000, observed total counts = 9909.000000
[Tue May 28 16:07:47 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 16:07:47 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:07:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:07:47 2013] Assessing source extent using major axis lower bound
[Tue May 28 16:07:47 2013] Source does appear to be extended
[Tue May 28 16:07:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.20
[Wed May 29 10:21:17 2013] Counts = 8156.840000, rescaling region sizes by 2.000000
[Wed May 29 10:21:17 2013] XMMSAS src. selection expression = ellipse(26982.095000, 31699.052340, 944.668827, 730.897221, 16.239600, X, Y)
[Wed May 29 10:21:17 2013] Writing source region out to fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src7_src.reg
[Wed May 29 10:21:17 2013] Extracting stamp from image fullrun_mos1_xmm0152920101_pi300-10000_cl_sm2.00.img.gz, (256, 311) - (365, 419)
[Wed May 29 10:21:17 2013] XMMSAS bgd. selection expression = annulus(26982.095000, 31699.052340, 3148.896091, 6297.792181, X, Y) && !ellipse(24333.746200, 29265.364800, 2119.113661, 1858.286453, 4.386360, X, Y) && !ellipse(24289.411600, 26065.732600, 1601.248846, 1523.625644, 7.047688, X, Y) && !ellipse(23811.605774, 29979.260071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27534.001880, 30147.487400, 332.423911, 332.423911, 0.000000, X, Y) && !ellipse(24112.444489, 30352.246552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23290.537689, 27528.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23588.636414, 30331.946198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22890.321228, 30130.740112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25683.393463, 30371.838013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27532.594818, 31734.627380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25727.857239, 27180.277740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28267.022600, 28169.930600, 308.460809, 308.460809, 0.000000, X, Y) && !ellipse(25446.155975, 31304.571045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23821.492000, 30826.208000, 1347.848039, 881.488025, 357.389300, X, Y) && !ellipse(20560.344513, 34717.414734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20816.042400, 30139.332100, 1461.008042, 493.023214, 358.217777, X, Y) && !ellipse(25862.684000, 32077.216000, 1469.992042, 1469.992042, 0.000000, X, Y) && !ellipse(21891.910736, 27364.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.610000, 31812.544000, 1431.936041, 1431.936041, 0.000000, X, Y)
[Wed May 29 10:21:17 2013] Writing fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src7.gif
[Wed May 29 10:30:42 2013] Mean detx,y = (-7122.97, -2735.77) 
[Wed May 29 10:30:43 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 10:31:53 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 10:31:53 2013] Setting source spectrum file to fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed May 29 10:31:53 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed May 29 13:16:33 2013] Updating aperture counts using extracted products
[Wed May 29 13:16:33 2013] Total counts from fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 10337.00
[Wed May 29 13:16:33 2013] Total counts from fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 20238.00
[Wed May 29 13:16:33 2013] Got source and background scale factors 1766974.000000, 66930135.000000
[Wed May 29 13:16:33 2013] User source parameters:
  Position = (310.7, 364.9) = 17 47 15.65 -29 57 59.9
  Extent = 7.9 (7.5-8.1)" x 6.1 (6.0-6.2)", rotation angle = 16 (11-21) degrees
  Source aperture counts = 9802.7 +/- 102.7
  Background aperture counts = 534.3
  Rate = 0.2 +/- 0.002

[Wed May 29 13:16:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 13:16:38 2013] Using photon index=1.80, rate=0.158, arf fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src7.arf
[Wed May 29 13:16:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 13:16:38 2013] Updating source flux to 4.1e-12
[Wed May 29 13:16:45 2013] Flag p found in src. 7 procflags, skipping spectral fitting
[Wed May 29 13:16:45 2013] Flag c found in src. 7 procflags, skipping spectral fitting
[Wed May 29 13:16:56 2013] xmm0152920101/analysis//spectral/fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete