[Mon May 27 15:26:17 2013] Detection parameters:
  Position = (276.7, 274.2) = 17 47 27.03 -30 4 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.4 +/- 22.6
  Background counts = 61.2
  Rate = 0.003 +/- 0.0004

[Mon May 27 15:26:17 2013] Off-axis axis estimate = 2.36'
[Mon May 27 18:28:55 2013] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Mon May 27 18:28:55 2013] Initial guess for spatial extent in simple fitting = 7.61"
[Mon May 27 18:28:55 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.989
[Mon May 27 18:28:55 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.61"
[Tue May 28 00:29:24 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src30.ximg exists
[Tue May 28 00:29:24 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue May 28 00:29:24 2013] Fit fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src30 appears to have run properly
[Tue May 28 00:29:26 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue May 28 00:29:26 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue May 28 00:29:26 2013] Fit fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue May 28 06:39:48 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 10.518083 pixels away
[Tue May 28 06:39:49 2013] Vigneting correction estimate = 1.000000
[Tue May 28 06:39:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 06:39:49 2013] Assessing source extent using major
[Tue May 28 06:39:49 2013] Source does appear to be extended
[Tue May 28 06:39:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 11:08:48 2013] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Tue May 28 11:08:48 2013] Initial guess for spatial extent in simple fitting = 7.61"
[Tue May 28 11:08:48 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.989
[Tue May 28 11:08:48 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 7.61"
[Tue May 28 14:45:31 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src26.ximg exists
[Tue May 28 14:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src26.csv
[Tue May 28 14:45:31 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue May 28 14:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src26.csv
[Tue May 28 14:45:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 14:45:32 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue May 28 14:45:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue May 28 14:45:32 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue May 28 14:45:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue May 28 14:45:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:07:47 2013] Source 56 is offset by -6.296123 and -7.753002 pixels which is larger than
2 X fitted extent = 0.874437 x 0.874437, not incorporating fit results
[Tue May 28 16:07:47 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:07:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:07:47 2013] Assessing source extent using major
[Tue May 28 16:07:47 2013] Source does appear to be extended
[Tue May 28 16:07:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 10:21:18 2013] XMMSAS src. selection expression = ellipse(24024.345306, 23810.596863, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 10:21:18 2013] Writing source region out to fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src56_src.reg
[Wed May 29 10:21:18 2013] Extracting stamp from image fullrun_mos1_xmm0152920101_pi300-10000_cl_sm2.00.img.gz, (239, 237) - (314, 312)
[Wed May 29 10:21:18 2013] XMMSAS bgd. selection expression = annulus(24024.345306, 23810.596863, 1087.500000, 2175.000000, X, Y) && !ellipse(24289.411600, 26065.732600, 1601.248846, 1523.625644, 7.047688, X, Y) && !ellipse(24922.569720, 23805.977000, 495.877614, 292.505608, 99.469140, X, Y)
[Wed May 29 10:21:18 2013] Writing fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src56.gif
[Wed May 29 10:47:37 2013] Mean detx,y = (513.73, 605.50) 
[Wed May 29 10:47:38 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 10:47:49 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 10:47:49 2013] Setting source spectrum file to fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed May 29 10:47:49 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Wed May 29 11:31:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 11:31:33 2013] rmf not generated due to insufficient counts
[Wed May 29 13:16:37 2013] Updating aperture counts using extracted products
[Wed May 29 13:16:37 2013] Total counts from fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 1317.00
[Wed May 29 13:16:37 2013] Total counts from fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src56_bgd.pi.gz = 5464.00
[Wed May 29 13:16:37 2013] Got source and background scale factors 1344000.000000, 8219028.000000
[Wed May 29 13:16:37 2013] User source parameters:
  Position = (276.7, 274.2) = 17 47 27.03 -30 4 34.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 423.5 +/- 37.3
  Background aperture counts = 893.5
  Rate = 0.008 +/- 0.0007

[Wed May 29 13:16:37 2013] Updating counts from extracted products
[Wed May 29 13:16:37 2013] Set source signif. to 423.51/29.89 = 14.17
[Wed May 29 13:16:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 13:16:38 2013] Using photon index=1.80, rate=0.0082, arf fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src56.arf
[Wed May 29 13:16:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 13:16:38 2013] Updating source flux to 1.4e-13
[Wed May 29 13:16:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 13:16:56 2013] xmm0152920101/analysis//spectral/fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete