[Mon May 27 15:26:14 2013] Detection parameters:
  Position = (274.3, 345.1) = 17 47 27.85 -29 59 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1191.0 +/- 55.8
  Background counts = 77.7
  Rate = 0.04 +/- 0.002

[Mon May 27 15:26:17 2013] Off-axis axis estimate = 3.81'
[Mon May 27 18:28:55 2013] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Mon May 27 18:28:55 2013] Initial guess for spatial extent in simple fitting = 8.34"
[Mon May 27 18:28:55 2013] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.642
[Mon May 27 18:28:55 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.34"
[Tue May 28 00:29:23 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src4.ximg exists
[Tue May 28 00:29:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src4.csv
[Tue May 28 00:29:23 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue May 28 00:29:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src4.csv
[Tue May 28 00:29:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 00:29:25 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue May 28 00:29:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May 28 00:29:25 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue May 28 00:29:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May 28 00:29:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 06:39:48 2013] Source 4 is offset by -5.689589 and 6.811288 pixels which is larger than
2 X fitted extent = 2.151209 x 2.151209, not incorporating fit results
[Tue May 28 06:39:48 2013] Source 4 is offset by -6.402209 and 2.892920 pixels which is larger than
2 X fitted extent = 7.746253 x 2.709720, not incorporating fit results
[Tue May 28 06:39:48 2013] Source 4 is offset by -3.547681 and 2.682346 pixels which is larger than
2 X fitted extent = 2.668989 x 2.668989, not incorporating fit results
[Tue May 28 06:39:48 2013] Source 4 is offset by 4.953882 and 1.939656 pixels which is larger than
2 X fitted extent = 2.998823 x 1.530864, not incorporating fit results
[Tue May 28 06:39:49 2013] Vigneting correction estimate = 1.000000
[Tue May 28 06:39:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 06:39:49 2013] Assessing source extent using major
[Tue May 28 06:39:49 2013] Source does appear to be extended
[Tue May 28 06:39:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 06:39:49 2013] Source is confused with source 3
[Tue May 28 06:39:49 2013] Source is confused with source 12
[Tue May 28 11:08:48 2013] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Tue May 28 11:08:48 2013] Initial guess for spatial extent in simple fitting = 8.34"
[Tue May 28 11:08:48 2013] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.642
[Tue May 28 11:08:48 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.34"
[Tue May 28 14:45:31 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src4.ximg exists
[Tue May 28 14:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src4.csv
[Tue May 28 14:45:31 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue May 28 14:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src4.csv
[Tue May 28 14:45:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 14:45:32 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue May 28 14:45:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue May 28 14:45:32 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue May 28 14:45:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue May 28 14:45:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:07:47 2013] Source 4 is offset by -5.855014 and 6.811288 pixels which is larger than
2 X fitted extent = 3.011890 x 1.785002, not incorporating fit results
[Tue May 28 16:07:47 2013] Source 4 is offset by -3.567589 and 2.689449 pixels which is larger than
2 X fitted extent = 2.678267 x 2.678267, not incorporating fit results
[Tue May 28 16:07:47 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:07:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:07:47 2013] Assessing source extent using major
[Tue May 28 16:07:47 2013] Source does appear to be extended
[Tue May 28 16:07:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 10:21:17 2013] Counts = 1191.047363, rescaling region sizes by 2.000000
[Wed May 29 10:21:17 2013] XMMSAS src. selection expression = ellipse(23811.605774, 29979.260071, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 29 10:21:17 2013] Writing source region out to fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src4_src.reg
[Wed May 29 10:21:17 2013] Extracting stamp from image fullrun_mos1_xmm0152920101_pi300-10000_cl_sm2.00.img.gz, (199, 270) - (349, 420)
[Wed May 29 10:21:18 2013] XMMSAS bgd. selection expression = annulus(23811.605774, 29979.260071, 4350.000000, 8700.000000, X, Y) && !ellipse(24333.746200, 29265.364800, 2119.113661, 1858.286453, 4.386360, X, Y) && !ellipse(24289.411600, 26065.732600, 1601.248846, 1523.625644, 7.047688, X, Y) && !ellipse(26982.095000, 31699.052340, 629.779218, 487.264814, 16.239600, X, Y) && !ellipse(27534.001880, 30147.487400, 332.423911, 332.423911, 0.000000, X, Y) && !ellipse(24112.444489, 30352.246552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23290.537689, 27528.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23588.636414, 30331.946198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22890.321228, 30130.740112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25683.393463, 30371.838013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24922.569720, 23805.977000, 495.877614, 292.505608, 99.469140, X, Y) && !ellipse(27532.594818, 31734.627380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32428.418396, 21326.613846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25727.857239, 27180.277740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17096.473816, 30309.205872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28267.022600, 28169.930600, 308.460809, 308.460809, 0.000000, X, Y) && !ellipse(25446.155975, 31304.571045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23821.492000, 30826.208000, 1347.848039, 881.488025, 357.389300, X, Y) && !ellipse(20560.344513, 34717.414734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27106.422720, 21268.224000, 330.961610, 241.395207, 27.430784, X, Y) && !ellipse(20816.042400, 30139.332100, 1461.008042, 493.023214, 358.217777, X, Y) && !ellipse(24024.345306, 23810.596863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25862.684000, 32077.216000, 1469.992042, 1469.992042, 0.000000, X, Y) && !ellipse(21891.910736, 27364.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.610000, 31812.544000, 1431.936041, 1431.936041, 0.000000, X, Y)
[Wed May 29 10:21:18 2013] Writing fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src4.gif
[Wed May 29 10:32:10 2013] Mean detx,y = (-4910.41, 94.56) 
[Wed May 29 10:32:11 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 10:34:08 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 10:34:08 2013] Setting source spectrum file to fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 29 10:34:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 29 11:00:29 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 11:00:29 2013] rmf not generated due to insufficient counts
[Wed May 29 13:16:33 2013] Updating aperture counts using extracted products
[Wed May 29 13:16:33 2013] Total counts from fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 171155.00
[Wed May 29 13:16:33 2013] Total counts from fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 47266.00
[Wed May 29 13:16:34 2013] Got source and background scale factors 4984468.000000, 154310697.000000
[Wed May 29 13:16:34 2013] User source parameters:
  Position = (274.3, 345.1) = 17 47 27.85 -29 59 22.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 169628.2 +/- 414.7
  Background aperture counts = 1526.8
  Rate = 3 +/- 0.008

[Wed May 29 13:16:34 2013] Updating counts from extracted products
[Wed May 29 13:16:34 2013] Set source signif. to 169628.24/39.07 = 4341.23
[Wed May 29 13:16:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 13:16:38 2013] Using photon index=1.80, rate=3.28, arf fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src4.arf
[Wed May 29 13:16:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 13:16:38 2013] Updating source flux to 6.8e-11
[Wed May 29 13:16:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 13:16:56 2013] xmm0152920101/analysis//spectral/fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete