[Mon May 27 15:26:15 2013] Detection parameters:
  Position = (263.7, 346.9) = 17 47 31.39 -29 59 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 331.4 +/- 30.8
  Background counts = 83.5
  Rate = 0.009 +/- 0.0008

[Mon May 27 15:26:17 2013] Off-axis axis estimate = 4.32'
[Mon May 27 18:28:55 2013] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Mon May 27 18:28:55 2013] Initial guess for spatial extent in simple fitting = 8.59"
[Mon May 27 18:28:55 2013] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.857
[Mon May 27 18:28:55 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.59"
[Tue May 28 00:29:24 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src10.ximg exists
[Tue May 28 00:29:24 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May 28 00:29:24 2013] Fit fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_src10 appears to have run properly
[Tue May 28 00:29:25 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May 28 00:29:25 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May 28 00:29:25 2013] Fit fullrun_mos1_xmm0152920101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue May 28 06:39:48 2013] Warning, spatial fit 10 centroid is now closest to src. 4
[Tue May 28 06:39:49 2013] Vigneting correction estimate = 1.000000
[Tue May 28 06:39:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 06:39:49 2013] Assessing source extent using major
[Tue May 28 06:39:49 2013] Source does appear to be extended
[Tue May 28 06:39:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 11:08:48 2013] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Tue May 28 11:08:48 2013] Initial guess for spatial extent in simple fitting = 8.59"
[Tue May 28 11:08:48 2013] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.857
[Tue May 28 11:08:48 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.59"
[Tue May 28 14:45:31 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src10.ximg exists
[Tue May 28 14:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src10.csv
[Tue May 28 14:45:31 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue May 28 14:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src10.csv
[Tue May 28 14:45:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 14:45:32 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue May 28 14:45:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue May 28 14:45:32 2013] fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue May 28 14:45:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue May 28 14:45:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152920101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 16:07:47 2013] Source 13 is offset by 7.997393 and 4.577886 pixels which is larger than
2 X fitted extent = 7.898989 x 7.898989, not incorporating fit results
[Tue May 28 16:07:47 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 33.660883 pixels away
[Tue May 28 16:07:47 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:07:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:07:47 2013] Assessing source extent using major
[Tue May 28 16:07:47 2013] Source does appear to be extended
[Tue May 28 16:07:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 10:21:18 2013] XMMSAS src. selection expression = ellipse(22890.321228, 30130.740112, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 10:21:18 2013] Writing source region out to fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src13_src.reg
[Wed May 29 10:21:18 2013] Extracting stamp from image fullrun_mos1_xmm0152920101_pi300-10000_cl_sm2.00.img.gz, (226, 309) - (301, 384)
[Wed May 29 10:21:18 2013] XMMSAS bgd. selection expression = annulus(22890.321228, 30130.740112, 1087.500000, 2175.000000, X, Y) && !ellipse(24333.746200, 29265.364800, 2119.113661, 1858.286453, 4.386360, X, Y) && !ellipse(23811.605774, 29979.260071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24112.444489, 30352.246552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23290.537689, 27528.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23588.636414, 30331.946198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25683.393463, 30371.838013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25727.857239, 27180.277740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25446.155975, 31304.571045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23821.492000, 30826.208000, 1347.848039, 881.488025, 357.389300, X, Y) && !ellipse(20816.042400, 30139.332100, 1461.008042, 493.023214, 358.217777, X, Y) && !ellipse(25862.684000, 32077.216000, 1469.992042, 1469.992042, 0.000000, X, Y) && !ellipse(21891.910736, 27364.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.610000, 31812.544000, 1431.936041, 1431.936041, 0.000000, X, Y)
[Wed May 29 10:21:18 2013] Writing fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src13.gif
[Wed May 29 10:36:06 2013] Mean detx,y = (-5689.83, 1331.73) 
[Wed May 29 10:36:07 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 10:36:19 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 10:36:19 2013] Setting source spectrum file to fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed May 29 10:36:19 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed May 29 11:05:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 11:05:07 2013] rmf not generated due to insufficient counts
[Wed May 29 13:16:34 2013] Updating aperture counts using extracted products
[Wed May 29 13:16:34 2013] Total counts from fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 2997.00
[Wed May 29 13:16:34 2013] Total counts from fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 2256.00
[Wed May 29 13:16:35 2013] Got source and background scale factors 1258184.000000, 2013128.000000
[Wed May 29 13:16:35 2013] User source parameters:
  Position = (263.7, 346.9) = 17 47 31.39 -29 59 18.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1587.0 +/- 55.8
  Background aperture counts = 1410.0
  Rate = 0.03 +/- 0.001

[Wed May 29 13:16:35 2013] Updating counts from extracted products
[Wed May 29 13:16:35 2013] Set source signif. to 1587.02/37.55 = 42.26
[Wed May 29 13:16:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 13:16:38 2013] Using photon index=1.80, rate=0.0307, arf fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src13.arf
[Wed May 29 13:16:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 13:16:38 2013] Updating source flux to 7e-13
[Wed May 29 13:16:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 13:16:56 2013] xmm0152920101/analysis//spectral/fullrun_mos1_xmm0152920101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete