[Sat Aug  4 03:14:41 2012] Detection parameters:
  Position = (282.7, 280.2) = 4 41 27.37 15 4 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15517.0 +/- 148.4
  Background counts = 19.2
  Rate = 3 +/- 0.03

[Sat Aug  4 03:14:41 2012] Off-axis axis estimate = 1.75'
[Sat Aug  4 03:15:48 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 03:15:48 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Aug  4 03:15:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.053
[Sat Aug  4 03:15:48 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.30"
[Sat Aug  4 03:35:11 2012] fullrun_pn_xmm0152900201_pi300-10000_cl_pass0_src2.ximg exists
[Sat Aug  4 03:35:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152900201_pi300-10000_cl_pass0_src2.csv
[Sat Aug  4 03:35:11 2012] fullrun_pn_xmm0152900201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Aug  4 03:35:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152900201_pi300-10000_cl_pass0_src2.csv
[Sat Aug  4 03:35:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152900201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152900201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 03:35:12 2012] fullrun_pn_xmm0152900201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Aug  4 03:35:12 2012] fullrun_pn_xmm0152900201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Aug  4 03:35:12 2012] Fit fullrun_pn_xmm0152900201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Aug  4 03:44:42 2012] Spatial fit model total counts = 11484.700000, observed total counts = 11449.000000
[Sat Aug  4 03:44:42 2012] Offset between fit and detection position for source 2 = 0.193715 pixels
[Sat Aug  4 03:44:42 2012] 11530.940000 total counts/ 2298.190000 bgd. counts: snr = 192.591941
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.193715 pixels
  Position = (282.7, 280.4) = 4 41 27.37 15 4 55.6
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 9232.8 +/- 107.4
  Background counts = 2298.2
  Rate = 2 +/- 0.03
[Sat Aug  4 03:44:42 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 03:44:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 03:44:42 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 03:44:42 2012] Source does appear to be extended
[Sat Aug  4 03:44:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 03:44:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 03:44:48 2012] Initial guess for spatial extent in simple fitting = 5.92"
[Sat Aug  4 03:44:48 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.867
[Sat Aug  4 03:44:48 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.92"
[Sat Aug  4 03:55:16 2012] fullrun_pn_xmm0152900201_pi300-10000_cl_pass1_src2.ximg exists
[Sat Aug  4 03:55:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152900201_pi300-10000_cl_pass1_src2.csv
[Sat Aug  4 03:55:16 2012] fullrun_pn_xmm0152900201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Aug  4 03:55:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152900201_pi300-10000_cl_pass1_src2.csv
[Sat Aug  4 03:55:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152900201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152900201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 03:55:16 2012] fullrun_pn_xmm0152900201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Aug  4 03:55:16 2012] fullrun_pn_xmm0152900201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Aug  4 03:55:16 2012] Fit fullrun_pn_xmm0152900201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Aug  4 04:02:49 2012] Spatial fit model total counts = 11483.800000, observed total counts = 11449.000000
[Sat Aug  4 04:02:49 2012] Offset between fit and detection position for source 2 = 0.000048 pixels
[Sat Aug  4 04:02:49 2012] 11529.910000 total counts/ 2295.000000 bgd. counts: snr = 192.770832
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000048 pixels
  Position = (282.7, 280.4) = 4 41 27.37 15 4 55.6
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 9234.9 +/- 107.4
  Background counts = 2295.0
  Rate = 2 +/- 0.03
[Sat Aug  4 04:02:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 04:02:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 04:02:49 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 04:02:49 2012] Source does appear to be extended
[Sat Aug  4 04:02:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 04:02:54 2012] Counts = 9234.910000, rescaling region sizes by 2.000000
[Sat Aug  4 04:02:54 2012] XMMSAS src. selection expression = ellipse(24543.360000, 24348.414600, 710.649620, 710.649620, 0.000000, X, Y)
[Sat Aug  4 04:02:54 2012] Writing source region out to fullrun_pn_xmm0152900201_pi300-10000_pass1_cl_src2_src.reg
[Sat Aug  4 04:02:54 2012] Extracting stamp from image fullrun_pn_xmm0152900201_pi300-10000_cl_sm2.00.img.gz, (242, 240) - (324, 321)
[Sat Aug  4 04:02:54 2012] XMMSAS bgd. selection expression = annulus(24543.360000, 24348.414600, 2368.832068, 4737.664136, X, Y)
[Sat Aug  4 04:02:54 2012] Writing fullrun_pn_xmm0152900201_pi300-10000_pass1_cl_src2.gif
[Sat Aug  4 04:03:30 2012] Mean detx,y = (102.20, -251.68) 
[Sat Aug  4 04:03:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 04:04:53 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 04:04:53 2012] Setting source spectrum file to fullrun_pn_xmm0152900201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug  4 04:04:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0152900201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Aug  4 04:22:29 2012] Updating aperture counts using extracted products
[Sat Aug  4 04:22:29 2012] Error reading totcts from fullrun_pn_xmm0152900201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug  4 04:22:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 04:22:29 2012] Using photon index=1.80, rate=2.24, arf fullrun_pn_xmm0152900201_pi300-10000_pass1_cl_src2.arf
[Sat Aug  4 04:22:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 04:22:29 2012] Updating source flux to 5.3e-12
[Sat Aug  4 04:23:00 2012] Reading fit data from xmm0152900201/analysis//spectral/fullrun_pn_xmm0152900201_pi300-10000_pass1_cl_src2_pl.csv
[Sat Aug  4 04:23:00 2012] Spectral fit parameter nH value = 3.7229e+21
[Sat Aug  4 04:23:00 2012] Spectral fit parameter PhoIndex value = 2.07681
[Sat Aug  4 04:23:00 2012] Failed to get F(0.3-8.0) from xmm0152900201/analysis//spectral/fullrun_pn_xmm0152900201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Aug  4 04:23:00 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 04:23:00 2012] Using Nh = 3.7e+21, photon index=2.08, rate=2.24, arf fullrun_pn_xmm0152900201_pi300-10000_pass1_cl_src2.arf
[Sat Aug  4 04:23:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 04:23:00 2012] Updating source flux to 8e-12