[Fri Jun  1 10:22:38 2012] Detection parameters:
  Position = (220.2, 425.0) = 18 11 21.98 -19 25 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.8 +/- 21.5
  Background counts = 58.6
  Rate = 0.02 +/- 0.002

[Fri Jun  1 10:22:38 2012] Off-axis axis estimate = 10.79'
[Fri Jun  1 15:20:18 2012] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 15:20:18 2012] Initial guess for spatial extent in simple fitting = 11.82"
[Fri Jun  1 15:20:18 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.869
[Fri Jun  1 15:20:18 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.82"
[Fri Jun  1 17:15:33 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jun  1 17:15:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_src11.csv
[Fri Jun  1 17:15:33 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jun  1 17:15:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_src11.csv
[Fri Jun  1 17:15:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 17:15:33 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jun  1 17:15:33 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jun  1 17:15:33 2012] Fit fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Jun  1 17:15:54 2012] Spatial fit model total counts = 569.646000, observed total counts = 566.000000
[Fri Jun  1 17:15:54 2012] Offset between fit and detection position for source 6 = 2.955861 pixels
[Fri Jun  1 17:15:54 2012] Warning, changing simple spatial fit ID from 11 to 8
[Fri Jun  1 17:15:54 2012] 522.104000 total counts/ 146.448000 bgd. counts: snr = 31.041922
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.955861 pixels
  Position = (222.2, 422.8) = 18 11 21.37 -19 25 41.7
  Extent = 23.1 (23.1-23.2)", rotation angle = 0
  Source counts = 375.7 +/- 22.8
  Background counts = 146.4
  Rate = 0.09 +/- 0.006
[Fri Jun  1 17:15:54 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 17:15:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 17:15:54 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 17:15:54 2012] Source does appear to be extended
[Fri Jun  1 17:15:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 17:15:54 2012] Source is confused with source 8
[Fri Jun  1 22:24:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 22:24:54 2012] Initial guess for spatial extent in simple fitting = 23.15"
[Fri Jun  1 22:24:54 2012] source mask rpix=5.3, npix_max = 135, mask sum = 144, frac = 1.062
[Fri Jun  1 22:24:54 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 23.15"
[Sat Jun  2 01:16:46 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun  2 01:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_src11.csv
[Sat Jun  2 01:16:47 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun  2 01:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_src11.csv
[Sat Jun  2 01:16:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 01:16:47 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun  2 01:16:47 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun  2 01:16:47 2012] Fit fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Jun  2 01:17:12 2012] Spatial fit model total counts = 1624.730000, observed total counts = 1624.000000
[Sat Jun  2 01:17:12 2012] Offset between fit and detection position for source 6 = 5.112997 pixels
[Sat Jun  2 01:17:12 2012] 1484.209000 total counts/ 1304.260000 bgd. counts: snr = 4.982730
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 5.112997 pixels
  Position = (219.0, 418.8) = 18 11 22.35 -19 25 59.0
  Extent = 16.5 (12.5-21.2)", rotation angle = 0
  Source counts = 179.9 +/- 38.5
  Background counts = 1304.3
  Rate = 0.04 +/- 0.009
[Sat Jun  2 01:17:12 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 01:17:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 01:17:12 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 01:17:12 2012] Source does appear to be extended
[Sat Jun  2 01:17:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 02:41:21 2012] XMMSAS src. selection expression = ellipse(19006.114000, 36391.020000, 991.266029, 991.266029, 0.000000, X, Y)
[Sat Jun  2 02:41:21 2012] Writing source region out to fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun  2 02:41:21 2012] Extracting stamp from image fullrun_mos2_xmm0152833501_pi300-10000_cl_sm2.00.img.gz, (162, 362) - (276, 476)
[Sat Jun  2 02:41:21 2012] XMMSAS bgd. selection expression = annulus(19006.114000, 36391.020000, 1652.110048, 3304.220095, X, Y) && !ellipse(17075.166400, 37093.035000, 691.571220, 691.571220, 0.000000, X, Y) && !ellipse(15505.534000, 36012.600000, 452.454413, 452.454413, 0.000000, X, Y) && !ellipse(16308.672000, 35205.601320, 1885.768054, 1885.768054, 0.000000, X, Y) && !ellipse(15472.750000, 35964.364000, 980.648028, 980.648028, 0.000000, X, Y) && !ellipse(18047.820000, 35201.268000, 1548.760045, 1548.760045, 0.000000, X, Y) && !ellipse(15595.098400, 38573.235600, 1842.440053, 913.032026, 315.396000, X, Y) && !ellipse(19010.289600, 36227.212000, 859.776025, 859.776025, 0.000000, X, Y) && !ellipse(16170.430130, 36669.538300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16756.602000, 34983.708000, 1911.256055, 1911.256055, 0.000000, X, Y) && !ellipse(18430.146000, 35561.546000, 1842.440053, 1842.440053, 0.000000, X, Y) && !ellipse(17615.110000, 34856.856000, 2580.104074, 2580.104074, 0.000000, X, Y) && !ellipse(17049.930000, 36793.980000, 1963.688057, 1635.024047, 354.319000, X, Y) && !ellipse(14460.610000, 37060.674000, 2009.744058, 2009.744058, 0.000000, X, Y) && !ellipse(18120.424362, 37870.816925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18256.949951, 39017.935608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18452.450000, 37898.456000, 1947.528056, 1251.312036, 207.527000, X, Y) && !ellipse(19396.448700, 37332.950470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18090.008347, 36322.016205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18223.851028, 37354.331421, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  2 02:41:21 2012] Writing fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src6.gif
[Sat Jun  2 02:45:01 2012] Mean detx,y = (8288.28, 8789.46) 
[Sat Jun  2 02:45:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 02:45:18 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 02:45:18 2012] Setting source spectrum file to fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun  2 02:45:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun  2 03:45:29 2012] Updating aperture counts using extracted products
[Sat Jun  2 03:45:29 2012] Error reading totcts from fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun  2 03:45:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 03:45:29 2012] Using photon index=1.80, rate=0.0437, arf fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src6.arf
[Sat Jun  2 03:45:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 03:45:29 2012] Updating source flux to 9.9e-13
[Sat Jun  2 03:47:36 2012] Flag c found in src. 6 procflags, skipping spectral fitting