[Fri Jun  1 10:22:38 2012] Detection parameters:
  Position = (197.0, 426.9) = 18 11 29.12 -19 25 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 497.8 +/- 30.6
  Background counts = 62.4
  Rate = 0.05 +/- 0.003

[Fri Jun  1 10:22:38 2012] Off-axis axis estimate = 11.87'
[Fri Jun  1 15:20:18 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 15:20:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 15:20:18 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Fri Jun  1 15:20:18 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.806
[Fri Jun  1 15:20:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.36"
[Fri Jun  1 17:15:33 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  1 17:15:33 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  1 17:15:33 2012] Fit fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jun  1 17:15:33 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  1 17:15:33 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  1 17:15:33 2012] Fit fullrun_mos2_xmm0152833501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  1 17:15:54 2012] Spatial fit model total counts = 1217.940000, observed total counts = 1219.000000
[Fri Jun  1 17:15:54 2012] Offset between fit and detection position for source 2 = 0.104271 pixels
[Fri Jun  1 17:15:54 2012] 1200.342000 total counts/ 1039.270000 bgd. counts: snr = 4.996385
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.104271 pixels
  Position = (197.0, 427.0) = 18 11 29.13 -19 25 23.5
  Extent = 9.4 (7.1-12.6)", rotation angle = 0
  Source counts = 161.1 +/- 34.6
  Background counts = 1039.3
  Rate = 0.04 +/- 0.008
[Fri Jun  1 17:15:54 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 17:15:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 17:15:54 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 17:15:54 2012] Source does appear to be extended
[Fri Jun  1 17:15:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 17:15:54 2012] Source is confused with source 9
[Fri Jun  1 22:24:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 22:24:54 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Fri Jun  1 22:24:54 2012] source mask rpix=2.1, npix_max = 28, mask sum = 36, frac = 1.282
[Fri Jun  1 22:24:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.35"
[Sat Jun  2 01:16:46 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  2 01:16:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_src1.csv
[Sat Jun  2 01:16:46 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  2 01:16:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_src1.csv
[Sat Jun  2 01:16:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 01:16:47 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  2 01:16:47 2012] fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  2 01:16:47 2012] Fit fullrun_mos2_xmm0152833501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  2 01:17:12 2012] Spatial fit model total counts = 757.030000, observed total counts = 764.000000
[Sat Jun  2 01:17:12 2012] Offset between fit and detection position for source 2 = 0.179924 pixels
[Sat Jun  2 01:17:12 2012] 753.786000 total counts/ 613.638000 bgd. counts: snr = 5.657581
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.179924 pixels
  Position = (196.8, 426.9) = 18 11 29.18 -19 25 23.9
  Extent = 8.6 (6.2-10.8)", rotation angle = 0
  Source counts = 140.1 +/- 27.5
  Background counts = 613.6
  Rate = 0.03 +/- 0.007
[Sat Jun  2 01:17:12 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 01:17:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 01:17:12 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 01:17:12 2012] Source does appear to be extended
[Sat Jun  2 01:17:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 02:41:21 2012] XMMSAS src. selection expression = ellipse(17075.166400, 37093.035000, 518.678415, 518.678415, 0.000000, X, Y)
[Sat Jun  2 02:41:21 2012] Writing source region out to fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun  2 02:41:21 2012] Extracting stamp from image fullrun_mos2_xmm0152833501_pi300-10000_cl_sm2.00.img.gz, (167, 397) - (227, 457)
[Sat Jun  2 02:41:21 2012] XMMSAS bgd. selection expression = annulus(17075.166400, 37093.035000, 864.464025, 1728.928050, X, Y) && !ellipse(15505.534000, 36012.600000, 452.454413, 452.454413, 0.000000, X, Y) && !ellipse(16308.672000, 35205.601320, 1885.768054, 1885.768054, 0.000000, X, Y) && !ellipse(15472.750000, 35964.364000, 980.648028, 980.648028, 0.000000, X, Y) && !ellipse(18047.820000, 35201.268000, 1548.760045, 1548.760045, 0.000000, X, Y) && !ellipse(15595.098400, 38573.235600, 1842.440053, 913.032026, 315.396000, X, Y) && !ellipse(19010.289600, 36227.212000, 859.776025, 859.776025, 0.000000, X, Y) && !ellipse(16170.430130, 36669.538300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16756.602000, 34983.708000, 1911.256055, 1911.256055, 0.000000, X, Y) && !ellipse(19006.114000, 36391.020000, 1321.688038, 1321.688038, 0.000000, X, Y) && !ellipse(18430.146000, 35561.546000, 1842.440053, 1842.440053, 0.000000, X, Y) && !ellipse(17615.110000, 34856.856000, 2580.104074, 2580.104074, 0.000000, X, Y) && !ellipse(17049.930000, 36793.980000, 1963.688057, 1635.024047, 354.319000, X, Y) && !ellipse(14460.610000, 37060.674000, 2009.744058, 2009.744058, 0.000000, X, Y) && !ellipse(18120.424362, 37870.816925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18256.949951, 39017.935608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18452.450000, 37898.456000, 1947.528056, 1251.312036, 207.527000, X, Y) && !ellipse(19396.448700, 37332.950470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18090.008347, 36322.016205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18223.851028, 37354.331421, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  2 02:41:21 2012] Writing fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src2.gif
[Sat Jun  2 02:41:23 2012] Mean detx,y = (10146.11, 9459.82) 
[Sat Jun  2 02:41:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 02:41:33 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 02:41:33 2012] Setting source spectrum file to fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun  2 02:41:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun  2 03:45:28 2012] Updating aperture counts using extracted products
[Sat Jun  2 03:45:28 2012] Error reading totcts from fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun  2 03:45:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 03:45:29 2012] Using photon index=1.80, rate=0.034, arf fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src2.arf
[Sat Jun  2 03:45:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 03:45:29 2012] Updating source flux to 1e-12
[Sat Jun  2 03:47:36 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sat Jun  2 03:49:58 2012] Reading fit data from xmm0152833501/analysis//spectral/fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jun  2 03:49:58 2012] Spectral fit parameter nH value = 1.25442e+22
[Sat Jun  2 03:49:58 2012] Spectral fit parameter PhoIndex value = 1.72771
[Sat Jun  2 03:49:58 2012] Failed to get F(0.3-8.0) from xmm0152833501/analysis//spectral/fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jun  2 03:49:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 03:49:58 2012] Using Nh = 1.3e+22, photon index=1.73, rate=0.034, arf fullrun_mos2_xmm0152833501_pi300-10000_pass1_cl_src2.arf
[Sat Jun  2 03:49:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 03:49:58 2012] Updating source flux to 1.9e-12