[Fri Jun  1 10:22:15 2012] Detection parameters:
  Position = (180.7, 444.9) = 18 11 34.12 -19 24 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.3 +/- 22.9
  Background counts = 58.9
  Rate = 0.02 +/- 0.002

[Fri Jun  1 10:22:15 2012] Off-axis axis estimate = 13.63'
[Fri Jun  1 13:19:17 2012] Using EEF radius (= 13.24 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 13:19:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 13:19:17 2012] Initial guess for spatial extent in simple fitting = 13.24"
[Fri Jun  1 13:19:17 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.975
[Fri Jun  1 13:19:17 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 13.24"
[Fri Jun  1 15:20:17 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun  1 15:20:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_src7.csv
[Fri Jun  1 15:20:17 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun  1 15:20:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_src7.csv
[Fri Jun  1 15:20:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 15:20:18 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun  1 15:20:18 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun  1 15:20:18 2012] Fit fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jun  1 17:15:49 2012] Warning, spatial fit 7 centroid is now closest to src. 16
[Fri Jun  1 17:15:49 2012] Spatial fit model total counts = 516.797000, observed total counts = 516.000000
[Fri Jun  1 17:15:49 2012] Offset between fit and detection position for source 14 = 0.529857 pixels
[Fri Jun  1 17:15:49 2012] Warning, changing simple spatial fit ID from 7 to 21
[Fri Jun  1 17:15:49 2012] 490.845000 total counts/ 248.423000 bgd. counts: snr = 15.380701
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.529857 pixels
  Position = (180.8, 444.4) = 18 11 34.11 -19 24 7.7
  Extent = 24.1 (19.8-26.3)", rotation angle = 0
  Source counts = 242.4 +/- 22.2
  Background counts = 248.4
  Rate = 0.06 +/- 0.006
[Fri Jun  1 17:15:49 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 17:15:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 17:15:49 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 17:15:49 2012] Source does appear to be extended
[Fri Jun  1 17:15:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 17:15:49 2012] Source is confused with source 16
[Fri Jun  1 17:15:49 2012] Source is confused with source 5
[Fri Jun  1 17:15:49 2012] Source is confused with source 17
[Fri Jun  1 19:43:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 19:43:58 2012] Initial guess for spatial extent in simple fitting = 24.11"
[Fri Jun  1 19:43:58 2012] source mask rpix=5.5, npix_max = 146, mask sum = 144, frac = 0.986
[Fri Jun  1 19:43:58 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 24.11"
[Fri Jun  1 22:24:52 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun  1 22:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_src6.csv
[Fri Jun  1 22:24:52 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun  1 22:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_src6.csv
[Fri Jun  1 22:24:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 22:24:53 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun  1 22:24:53 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun  1 22:24:53 2012] Fit fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Jun  2 01:17:07 2012] Warning, spatial fit 6 centroid is now closest to src. 3
[Sat Jun  2 01:17:07 2012] Spatial fit model total counts = 882.521000, observed total counts = 882.000000
[Sat Jun  2 01:17:07 2012] Offset between fit and detection position for source 14 = 1.118296 pixels
[Sat Jun  2 01:17:07 2012] Warning, changing simple spatial fit ID from 6 to 17
[Sat Jun  2 01:17:07 2012] 878.611000 total counts/ 716.756000 bgd. counts: snr = 6.045615
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 1.118296 pixels
  Position = (181.4, 445.3) = 18 11 33.92 -19 24 3.7
  Extent = 24.2" x 10.3", rotation angle = 132
  Source counts = 161.9 +/- 29.6
  Background counts = 716.8
  Rate = 0.04 +/- 0.007
[Sat Jun  2 01:17:07 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 01:17:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 01:17:07 2012] Assessing source extent using major
[Sat Jun  2 01:17:07 2012] Source does appear to be extended
[Sat Jun  2 01:17:07 2012] Computing asymmetry using major and minor axis, asym = 2.35
[Sat Jun  2 01:17:07 2012] Source is asymmetric
[Sat Jun  2 01:55:35 2012] XMMSAS src. selection expression = ellipse(15732.150432, 38695.007944, 1449.379939, 615.518366, 131.597096, X, Y)
[Sat Jun  2 01:55:35 2012] Writing source region out to fullrun_mos1_xmm0152833501_pi300-10000_pass1_cl_src14_src.reg
[Sat Jun  2 01:55:35 2012] Extracting stamp from image fullrun_mos1_xmm0152833501_pi300-10000_cl_sm2.00.img.gz, (98, 362) - (265, 529)
[Sat Jun  2 01:55:35 2012] XMMSAS bgd. selection expression = annulus(15732.150432, 38695.007944, 2415.633231, 4831.266463, X, Y) && !ellipse(17061.452000, 37076.090000, 851.536025, 851.536025, 0.000000, X, Y) && !ellipse(15450.590000, 35768.564000, 1927.280055, 1927.280055, 0.000000, X, Y) && !ellipse(16348.892000, 35129.940000, 1137.448033, 1137.448033, 0.000000, X, Y) && !ellipse(19184.057600, 36317.158000, 1871.088054, 1871.088054, 0.000000, X, Y) && !ellipse(19205.714000, 36782.542000, 1285.136037, 1285.136037, 0.000000, X, Y) && !ellipse(17059.796000, 37369.724000, 1965.896057, 1965.896057, 0.000000, X, Y) && !ellipse(18519.053116, 36136.259735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17562.107544, 37529.329712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18503.966000, 37961.028000, 1162.696033, 1162.696033, 0.000000, X, Y) && !ellipse(17379.065842, 35621.792053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16558.600723, 36409.637482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17562.404907, 34762.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17885.760000, 39003.860200, 981.968028, 981.968028, 0.000000, X, Y) && !ellipse(16874.278000, 39031.959800, 1387.616040, 1387.616040, 0.000000, X, Y) && !ellipse(15306.068085, 37997.501648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18774.290375, 37451.940918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15023.108000, 36469.644000, 2031.640058, 2031.640058, 0.000000, X, Y) && !ellipse(15081.214981, 37339.165894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18245.935000, 37169.828000, 3865.456111, 3865.456111, 0.000000, X, Y)
[Sat Jun  2 01:55:35 2012] Writing fullrun_mos1_xmm0152833501_pi300-10000_pass1_cl_src14.gif
[Sat Jun  2 01:57:29 2012] Mean detx,y = (11153.40, -11463.40) 
[Sat Jun  2 01:57:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 01:57:51 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 01:57:51 2012] Setting source spectrum file to fullrun_mos1_xmm0152833501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jun  2 01:57:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0152833501_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Jun  2 03:45:28 2012] Updating aperture counts using extracted products
[Sat Jun  2 03:45:28 2012] Error reading totcts from fullrun_mos1_xmm0152833501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jun  2 03:45:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 03:45:28 2012] Using photon index=1.80, rate=0.0406, arf fullrun_mos1_xmm0152833501_pi300-10000_pass1_cl_src14.arf
[Sat Jun  2 03:45:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 03:45:28 2012] Updating source flux to 1.2e-12
[Sat Jun  2 03:45:30 2012] Flag c found in src. 14 procflags, skipping spectral fitting