[Fri Jun  1 10:22:14 2012] Detection parameters:
  Position = (178.4, 413.9) = 18 11 34.84 -19 26 20.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 461.8 +/- 30.3
  Background counts = 60.3
  Rate = 0.05 +/- 0.003

[Fri Jun  1 10:22:15 2012] Off-axis axis estimate = 12.07'
[Fri Jun  1 13:19:17 2012] Using EEF radius (= 12.46 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 13:19:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 13:19:17 2012] Initial guess for spatial extent in simple fitting = 12.46"
[Fri Jun  1 13:19:17 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.927
[Fri Jun  1 13:19:17 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.46"
[Fri Jun  1 15:20:17 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun  1 15:20:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_src2.csv
[Fri Jun  1 15:20:17 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun  1 15:20:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_src2.csv
[Fri Jun  1 15:20:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 15:20:18 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun  1 15:20:18 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun  1 15:20:18 2012] Fit fullrun_mos1_xmm0152833501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jun  1 17:15:49 2012] Warning, spatial fit 2 centroid is now closest to src. 17
[Fri Jun  1 17:15:49 2012] Spatial fit model total counts = 881.879000, observed total counts = 880.000000
[Fri Jun  1 17:15:49 2012] Offset between fit and detection position for source 1 = 2.193041 pixels
[Fri Jun  1 17:15:49 2012] Warning, changing simple spatial fit ID from 2 to 3
[Fri Jun  1 17:15:49 2012] 901.649000 total counts/ 519.207000 bgd. counts: snr = 16.783994
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.193041 pixels
  Position = (178.2, 411.7) = 18 11 34.92 -19 26 30.0
  Extent = 24.1 (19.4-48.2)", rotation angle = 0
  Source counts = 382.4 +/- 30.0
  Background counts = 519.2
  Rate = 0.1 +/- 0.008
[Fri Jun  1 17:15:49 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 17:15:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 17:15:49 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 17:15:49 2012] Source does appear to be extended
[Fri Jun  1 17:15:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 17:15:49 2012] Source is confused with source 2
[Fri Jun  1 17:15:49 2012] Source is confused with source 10
[Fri Jun  1 17:15:49 2012] Source is confused with source 20
[Fri Jun  1 19:43:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 19:43:58 2012] Initial guess for spatial extent in simple fitting = 24.09"
[Fri Jun  1 19:43:58 2012] source mask rpix=5.5, npix_max = 145, mask sum = 144, frac = 0.987
[Fri Jun  1 19:43:58 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 24.09"
[Fri Jun  1 22:24:52 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun  1 22:24:52 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun  1 22:24:52 2012] Fit fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Jun  1 22:24:53 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun  1 22:24:53 2012] fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun  1 22:24:53 2012] Fit fullrun_mos1_xmm0152833501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jun  2 01:17:07 2012] Warning, spatial fit 2 centroid is now closest to src. 2
[Sat Jun  2 01:17:07 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 01:17:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 01:17:07 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 01:17:07 2012] Source does appear to be extended
[Sat Jun  2 01:17:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 01:55:35 2012] XMMSAS src. selection expression = ellipse(15450.590000, 35768.564000, 1445.460042, 1445.460042, 0.000000, X, Y)
[Sat Jun  2 01:55:35 2012] Writing source region out to fullrun_mos1_xmm0152833501_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  2 01:55:35 2012] Extracting stamp from image fullrun_mos1_xmm0152833501_pi300-10000_cl_sm2.00.img.gz, (95, 329) - (261, 495)
[Sat Jun  2 01:55:35 2012] XMMSAS bgd. selection expression = annulus(15450.590000, 35768.564000, 2409.100069, 4818.200139, X, Y) && !ellipse(17061.452000, 37076.090000, 851.536025, 851.536025, 0.000000, X, Y) && !ellipse(16348.892000, 35129.940000, 1137.448033, 1137.448033, 0.000000, X, Y) && !ellipse(19184.057600, 36317.158000, 1871.088054, 1871.088054, 0.000000, X, Y) && !ellipse(15732.150432, 38695.007944, 1932.506585, 820.691155, 131.597096, X, Y) && !ellipse(19205.714000, 36782.542000, 1285.136037, 1285.136037, 0.000000, X, Y) && !ellipse(17059.796000, 37369.724000, 1965.896057, 1965.896057, 0.000000, X, Y) && !ellipse(18519.053116, 36136.259735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17562.107544, 37529.329712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18503.966000, 37961.028000, 1162.696033, 1162.696033, 0.000000, X, Y) && !ellipse(17379.065842, 35621.792053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16558.600723, 36409.637482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17562.404907, 34762.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17885.760000, 39003.860200, 981.968028, 981.968028, 0.000000, X, Y) && !ellipse(16874.278000, 39031.959800, 1387.616040, 1387.616040, 0.000000, X, Y) && !ellipse(15306.068085, 37997.501648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18774.290375, 37451.940918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15023.108000, 36469.644000, 2031.640058, 2031.640058, 0.000000, X, Y) && !ellipse(15081.214981, 37339.165894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18245.935000, 37169.828000, 3865.456111, 3865.456111, 0.000000, X, Y)
[Sat Jun  2 01:55:35 2012] Writing fullrun_mos1_xmm0152833501_pi300-10000_pass1_cl_src1.gif
[Sat Jun  2 01:55:49 2012] Mean detx,y = (8527.03, -11704.10) 
[Sat Jun  2 01:55:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 01:56:20 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 01:56:20 2012] Setting source spectrum file to fullrun_mos1_xmm0152833501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 01:56:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0152833501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  2 03:45:28 2012] Updating aperture counts using extracted products
[Sat Jun  2 03:45:28 2012] Error reading totcts from fullrun_mos1_xmm0152833501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 03:45:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 03:45:28 2012] Using photon index=1.80, rate=0.0959, arf fullrun_mos1_xmm0152833501_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 03:45:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 03:45:28 2012] Updating source flux to 2.2e-12
[Sat Jun  2 03:45:30 2012] Flag c found in src. 1 procflags, skipping spectral fitting