[Thu Nov 24 22:22:39 2011] Detection parameters:
  Position = (300.4, 415.0) = 18 8 48.98 -19 9 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.5 +/- 8.1
  Background counts = 9.8
  Rate = 0.008 +/- 0.002

[Thu Nov 24 22:22:40 2011] Off-axis axis estimate = 8.46'
[Thu Nov 24 22:24:25 2011] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 22:24:25 2011] Initial guess for spatial extent in simple fitting = 10.66"
[Thu Nov 24 22:24:25 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.034
[Thu Nov 24 22:24:25 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.66"
[Thu Nov 24 22:47:28 2011] fullrun_pn_xmm0152833401_pi300-10000_cl_pass0_src3.ximg exists
[Thu Nov 24 22:47:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152833401_pi300-10000_cl_pass0_src3.csv
[Thu Nov 24 22:47:28 2011] fullrun_pn_xmm0152833401_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Nov 24 22:47:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152833401_pi300-10000_cl_pass0_src3.csv
[Thu Nov 24 22:47:28 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152833401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152833401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 22:47:28 2011] fullrun_pn_xmm0152833401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Nov 24 22:47:28 2011] fullrun_pn_xmm0152833401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Nov 24 22:47:28 2011] Fit fullrun_pn_xmm0152833401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Nov 24 23:23:31 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.500953 pixels away
[Thu Nov 24 23:23:31 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 23:23:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 23:23:31 2011] Assessing source extent using major
[Thu Nov 24 23:23:31 2011] Source does appear to be extended
[Thu Nov 24 23:23:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 23:23:44 2011] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 23:23:44 2011] Initial guess for spatial extent in simple fitting = 10.66"
[Thu Nov 24 23:23:44 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.034
[Thu Nov 24 23:23:44 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 10.66"
[Thu Nov 24 23:46:02 2011] fullrun_pn_xmm0152833401_pi300-10000_cl_pass1_src3.ximg exists
[Thu Nov 24 23:46:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152833401_pi300-10000_cl_pass1_src3.csv
[Thu Nov 24 23:46:02 2011] fullrun_pn_xmm0152833401_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Nov 24 23:46:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152833401_pi300-10000_cl_pass1_src3.csv
[Thu Nov 24 23:46:02 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152833401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152833401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 23:46:02 2011] fullrun_pn_xmm0152833401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Nov 24 23:46:02 2011] fullrun_pn_xmm0152833401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Nov 24 23:46:02 2011] Fit fullrun_pn_xmm0152833401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Nov 25 00:22:26 2011] Spatial fit model total counts = 125.231000, observed total counts = 125.000000
[Fri Nov 25 00:22:26 2011] Offset between fit and detection position for source 3 = 0.295963 pixels
[Fri Nov 25 00:22:26 2011] 124.987200 total counts/ 104.561000 bgd. counts: snr = 1.997573
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.295963 pixels
  Position = (300.2, 414.9) = 18 8 49.06 -19 9 30.5
  Extent = 5.3 (3.2-9.7)", rotation angle = 0
  Source counts = 20.4 +/- 11.2
  Background counts = 104.6
  Rate = 0.003 +/- 0.002
[Fri Nov 25 00:22:26 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:22:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:22:26 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 00:22:26 2011] Source does appear to be extended
[Fri Nov 25 00:22:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:22:42 2011] XMMSAS src. selection expression = ellipse(26065.258500, 36045.975000, 320.206809, 320.206809, 0.000000, X, Y)
[Fri Nov 25 00:22:42 2011] Writing source region out to fullrun_pn_xmm0152833401_pi300-10000_pass1_cl_src3_src.reg
[Fri Nov 25 00:22:42 2011] Extracting stamp from image fullrun_pn_xmm0152833401_pi300-10000_cl_sm2.00.img.gz, (282, 396) - (319, 433)
[Fri Nov 25 00:22:42 2011] XMMSAS bgd. selection expression = annulus(26065.258500, 36045.975000, 533.678015, 1067.356031, X, Y)
[Fri Nov 25 00:22:42 2011] Writing fullrun_pn_xmm0152833401_pi300-10000_pass1_cl_src3.gif
[Fri Nov 25 00:24:44 2011] Mean detx,y = (-1245.42, -8656.61) 
[Fri Nov 25 00:24:48 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 00:25:04 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 00:25:05 2011] Setting source spectrum file to fullrun_pn_xmm0152833401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Nov 25 00:25:05 2011] Setting bgd. spectrum file to fullrun_pn_xmm0152833401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Nov 25 00:36:24 2011] Not generating rmf since there are only 20 counts
[Fri Nov 25 00:36:24 2011] rmf not generated due to insufficient counts
[Fri Nov 25 00:52:39 2011] Updating aperture counts using extracted products
[Fri Nov 25 00:52:39 2011] Error reading totcts from fullrun_pn_xmm0152833401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Nov 25 00:52:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 00:52:40 2011] Using photon index=1.80, rate=0.0029, arf fullrun_pn_xmm0152833401_pi300-10000_pass1_cl_src3.arf
[Fri Nov 25 00:52:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 00:52:40 2011] Updating source flux to 1.5e-14
[Fri Nov 25 00:53:03 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting