[Thu Nov 24 22:23:27 2011] Detection parameters:
  Position = (124.3, 303.9) = 18 9 43.09 -19 17 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.8 +/- 8.7
  Background counts = 3.5
  Rate = 0.005 +/- 0.001

[Thu Nov 24 22:23:27 2011] Off-axis axis estimate = 12.63'
[Thu Nov 24 23:04:51 2011] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 23:04:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 23:04:51 2011] Initial guess for spatial extent in simple fitting = 12.74"
[Thu Nov 24 23:04:51 2011] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.041
[Thu Nov 24 23:04:51 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 12.74"
[Thu Nov 24 23:23:25 2011] fullrun_mos2_xmm0152833401_pi300-10000_cl_pass0_src5.ximg exists
[Thu Nov 24 23:23:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152833401_pi300-10000_cl_pass0_src5.csv
[Thu Nov 24 23:23:25 2011] fullrun_mos2_xmm0152833401_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Nov 24 23:23:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152833401_pi300-10000_cl_pass0_src5.csv
[Thu Nov 24 23:23:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152833401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152833401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 23:23:26 2011] fullrun_mos2_xmm0152833401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Nov 24 23:23:26 2011] fullrun_mos2_xmm0152833401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Nov 24 23:23:26 2011] Fit fullrun_mos2_xmm0152833401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Nov 24 23:23:36 2011] Spatial fit model total counts = 78.867700, observed total counts = 79.000000
[Thu Nov 24 23:23:36 2011] Offset between fit and detection position for source 1 = 0.462112 pixels
[Thu Nov 24 23:23:36 2011] 79.890500 total counts/ 39.947500 bgd. counts: snr = 6.319691
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.462112 pixels
  Position = (124.2, 304.4) = 18 9 43.12 -19 17 30.7
  Extent = 8.1 (4.2-12.1)", rotation angle = 0
  Source counts = 39.9 +/- 8.9
  Background counts = 39.9
  Rate = 0.005 +/- 0.001
[Thu Nov 24 23:23:36 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 23:23:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 23:23:36 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 23:23:36 2011] Source does appear to be extended
[Thu Nov 24 23:23:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:03:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 00:03:26 2011] Initial guess for spatial extent in simple fitting = 8.06"
[Fri Nov 25 00:03:26 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.128
[Fri Nov 25 00:03:26 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 8.06"
[Fri Nov 25 00:22:21 2011] fullrun_mos2_xmm0152833401_pi300-10000_cl_pass1_src5.ximg exists
[Fri Nov 25 00:22:21 2011] fullrun_mos2_xmm0152833401_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Nov 25 00:22:21 2011] Fit fullrun_mos2_xmm0152833401_pi300-10000_cl_pass1_src5 appears to have run properly
[Fri Nov 25 00:22:21 2011] fullrun_mos2_xmm0152833401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Nov 25 00:22:21 2011] fullrun_mos2_xmm0152833401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Nov 25 00:22:21 2011] Fit fullrun_mos2_xmm0152833401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Nov 25 00:22:32 2011] Spatial fit model total counts = 70.956300, observed total counts = 71.000000
[Fri Nov 25 00:22:32 2011] Offset between fit and detection position for source 1 = 0.406079 pixels
[Fri Nov 25 00:22:32 2011] 73.206600 total counts/ 41.756100 bgd. counts: snr = 4.867070
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.406079 pixels
  Position = (124.2, 304.0) = 18 9 43.13 -19 17 32.5
  Extent = 6.1 (3.6-12.1)", rotation angle = 0
  Source counts = 31.5 +/- 8.6
  Background counts = 41.8
  Rate = 0.004 +/- 0.001
[Fri Nov 25 00:22:32 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:22:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:22:32 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 00:22:32 2011] Source does appear to be extended
[Fri Nov 25 00:22:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:49:08 2011] XMMSAS src. selection expression = ellipse(10754.023460, 26396.039400, 363.094810, 363.094810, 0.000000, X, Y)
[Fri Nov 25 00:49:08 2011] Writing source region out to fullrun_mos2_xmm0152833401_pi300-10000_pass1_cl_src1_src.reg
[Fri Nov 25 00:49:08 2011] Extracting stamp from image fullrun_mos2_xmm0152833401_pi300-10000_cl_sm2.00.img.gz, (103, 283) - (145, 325)
[Fri Nov 25 00:49:08 2011] XMMSAS bgd. selection expression = annulus(10754.023460, 26396.039400, 605.158017, 1210.316035, X, Y)
[Fri Nov 25 00:49:08 2011] Writing fullrun_mos2_xmm0152833401_pi300-10000_pass1_cl_src1.gif
[Fri Nov 25 00:50:39 2011] Mean detx,y = (16350.63, -1789.22) 
[Fri Nov 25 00:50:41 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 00:50:55 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 00:50:55 2011] Setting source spectrum file to fullrun_mos2_xmm0152833401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 00:50:55 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0152833401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Nov 25 00:52:09 2011] Not generating rmf since there are only 31 counts
[Fri Nov 25 00:52:09 2011] rmf not generated due to insufficient counts
[Fri Nov 25 00:52:43 2011] Updating aperture counts using extracted products
[Fri Nov 25 00:52:43 2011] Error reading totcts from fullrun_mos2_xmm0152833401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 00:52:43 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 00:52:43 2011] Using photon index=1.80, rate=0.00363, arf fullrun_mos2_xmm0152833401_pi300-10000_pass1_cl_src1.arf
[Fri Nov 25 00:52:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 00:52:43 2011] Updating source flux to 1.6e-13
[Fri Nov 25 00:53:02 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Nov 25 00:53:03 2011] xmm0152833401/analysis//spectral/fullrun_mos2_xmm0152833401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete