[Thu Nov 24 22:23:05 2011] Detection parameters:
  Position = (470.1, 216.1) = 18 7 56.81 -19 23 55.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 225.2 +/- 18.5
  Background counts = 2.9
  Rate = 0.03 +/- 0.002

[Thu Nov 24 22:23:06 2011] Off-axis axis estimate = 13.80'
[Thu Nov 24 22:47:28 2011] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 22:47:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 22:47:28 2011] Initial guess for spatial extent in simple fitting = 13.33"
[Thu Nov 24 22:47:28 2011] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.964
[Thu Nov 24 22:47:28 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 13.33"
[Thu Nov 24 23:04:51 2011] fullrun_mos1_xmm0152833401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Nov 24 23:04:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152833401_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 23:04:51 2011] fullrun_mos1_xmm0152833401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Nov 24 23:04:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152833401_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 23:04:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152833401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152833401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 23:04:51 2011] fullrun_mos1_xmm0152833401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Nov 24 23:04:51 2011] fullrun_mos1_xmm0152833401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Nov 24 23:04:51 2011] Fit fullrun_mos1_xmm0152833401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Nov 24 23:23:34 2011] Spatial fit model total counts = 283.898000, observed total counts = 284.000000
[Thu Nov 24 23:23:34 2011] Offset between fit and detection position for source 2 = 0.315660 pixels
[Thu Nov 24 23:23:34 2011] 283.355000 total counts/ 122.312000 bgd. counts: snr = 14.561540
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.315660 pixels
  Position = (469.8, 216.2) = 18 7 56.90 -19 23 54.3
  Extent = 7.2 (6.4-8.6)", rotation angle = 0
  Source counts = 161.0 +/- 16.8
  Background counts = 122.3
  Rate = 0.02 +/- 0.002
[Thu Nov 24 23:23:34 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 23:23:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 23:23:34 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 23:23:34 2011] Source does appear to be extended
[Thu Nov 24 23:23:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 23:46:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 23:46:02 2011] Initial guess for spatial extent in simple fitting = 7.21"
[Thu Nov 24 23:46:02 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Thu Nov 24 23:46:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.21"
[Fri Nov 25 00:03:26 2011] fullrun_mos1_xmm0152833401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Nov 25 00:03:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152833401_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 00:03:26 2011] fullrun_mos1_xmm0152833401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Nov 25 00:03:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152833401_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 00:03:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152833401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152833401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:03:26 2011] fullrun_mos1_xmm0152833401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Nov 25 00:03:26 2011] fullrun_mos1_xmm0152833401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Nov 25 00:03:26 2011] Fit fullrun_mos1_xmm0152833401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Nov 25 00:22:29 2011] Spatial fit model total counts = 233.839000, observed total counts = 234.000000
[Fri Nov 25 00:22:29 2011] Offset between fit and detection position for source 2 = 0.091110 pixels
[Fri Nov 25 00:22:29 2011] 231.019500 total counts/ 86.114500 bgd. counts: snr = 15.615117
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.091110 pixels
  Position = (469.9, 216.2) = 18 7 56.88 -19 23 54.1
  Extent = 6.5 (5.7-7.6)", rotation angle = 0
  Source counts = 144.9 +/- 15.2
  Background counts = 86.1
  Rate = 0.02 +/- 0.002
[Fri Nov 25 00:22:29 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:22:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:22:29 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 00:22:29 2011] Source does appear to be extended
[Fri Nov 25 00:22:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:40:36 2011] XMMSAS src. selection expression = ellipse(40831.771920, 18764.324200, 389.044811, 389.044811, 0.000000, X, Y)
[Fri Nov 25 00:40:36 2011] Writing source region out to fullrun_mos1_xmm0152833401_pi300-10000_pass1_cl_src2_src.reg
[Fri Nov 25 00:40:36 2011] Extracting stamp from image fullrun_mos1_xmm0152833401_pi300-10000_cl_sm2.00.img.gz, (448, 194) - (492, 239)
[Fri Nov 25 00:40:36 2011] XMMSAS bgd. selection expression = annulus(40831.771920, 18764.324200, 648.408019, 1296.816037, X, Y)
[Fri Nov 25 00:40:36 2011] Writing fullrun_mos1_xmm0152833401_pi300-10000_pass1_cl_src2.gif
[Fri Nov 25 00:40:39 2011] Mean detx,y = (-8016.08, 13794.43) 
[Fri Nov 25 00:40:41 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 00:40:54 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 00:40:54 2011] Setting source spectrum file to fullrun_mos1_xmm0152833401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Nov 25 00:40:54 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0152833401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Nov 25 00:52:41 2011] Updating aperture counts using extracted products
[Fri Nov 25 00:52:41 2011] Error reading totcts from fullrun_mos1_xmm0152833401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Nov 25 00:52:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 00:52:42 2011] Using photon index=1.80, rate=0.0167, arf fullrun_mos1_xmm0152833401_pi300-10000_pass1_cl_src2.arf
[Fri Nov 25 00:52:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 00:52:42 2011] Updating source flux to 4.5e-13
[Fri Nov 25 00:53:02 2011] Reading fit data from xmm0152833401/analysis//spectral/fullrun_mos1_xmm0152833401_pi300-10000_pass1_cl_src2_pl.csv
[Fri Nov 25 00:53:02 2011] Spectral fit parameter nH value = 1.37387e+22
[Fri Nov 25 00:53:02 2011] Spectral fit parameter PhoIndex value = 4.19895
[Fri Nov 25 00:53:02 2011] Failed to get F(0.3-8.0) from xmm0152833401/analysis//spectral/fullrun_mos1_xmm0152833401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Nov 25 00:53:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 00:53:02 2011] Using Nh = 1.4e+22, photon index=4.20, rate=0.0167, arf fullrun_mos1_xmm0152833401_pi300-10000_pass1_cl_src2.arf
[Fri Nov 25 00:53:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 00:53:02 2011] Updating source flux to 3.8e-13