[Mon Aug 27 10:53:32 2012] Detection parameters:
  Position = (309.0, 319.8) = 15 42 23.46 -52 23 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193442.8 +/- 515.1
  Background counts = 270.1
  Rate = 3 +/- 0.007

[Mon Aug 27 10:53:34 2012] Off-axis axis estimate = 1.73'
[Mon Aug 27 11:00:14 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 11:00:14 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Aug 27 11:00:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Mon Aug 27 11:00:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.29"
[Mon Aug 27 14:23:17 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_src3.ximg exists
[Mon Aug 27 14:23:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_src3.csv
[Mon Aug 27 14:23:17 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Aug 27 14:23:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_src3.csv
[Mon Aug 27 14:23:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 14:23:18 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Aug 27 14:23:18 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Aug 27 14:23:18 2012] Fit fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Aug 27 18:50:00 2012] Spatial fit model total counts = 155954.000000, observed total counts = 160480.000000
[Mon Aug 27 18:50:00 2012] Offset between fit and detection position for source 3 = 0.204561 pixels
[Mon Aug 27 18:50:00 2012] 156022.000000 total counts/ 25600.000000 bgd. counts: snr = 815.137500
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.204561 pixels
  Position = (308.9, 319.6) = 15 42 23.52 -52 23 9.7
  Extent = 6.8 (6.8-6.9)", rotation angle = 0
  Source counts = 130422.0 +/- 395.0
  Background counts = 25600.0
  Rate = 2 +/- 0.007
[Mon Aug 27 18:50:01 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 18:50:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 18:50:01 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 18:50:01 2012] Source does appear to be extended
[Mon Aug 27 18:50:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 18:50:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 27 18:50:32 2012] Initial guess for spatial extent in simple fitting = 6.84"
[Mon Aug 27 18:50:32 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.930
[Mon Aug 27 18:50:32 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.84"
[Mon Aug 27 21:11:57 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_src3.ximg exists
[Mon Aug 27 21:11:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_src3.csv
[Mon Aug 27 21:11:57 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Aug 27 21:11:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_src3.csv
[Mon Aug 27 21:11:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 21:11:59 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Aug 27 21:11:59 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Aug 27 21:11:59 2012] Fit fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Aug 28 00:17:27 2012] Spatial fit model total counts = 155956.000000, observed total counts = 160480.000000
[Tue Aug 28 00:17:27 2012] Offset between fit and detection position for source 3 = 0.000000 pixels
[Tue Aug 28 00:17:27 2012] 156024.000000 total counts/ 25600.000000 bgd. counts: snr = 815.150000
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000000 pixels
  Position = (308.9, 319.6) = 15 42 23.52 -52 23 9.7
  Extent = 6.8 (6.8-6.9)", rotation angle = 0
  Source counts = 130424.0 +/- 395.0
  Background counts = 25600.0
  Rate = 2 +/- 0.007
[Tue Aug 28 00:17:27 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 00:17:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 00:17:27 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 00:17:27 2012] Source does appear to be extended
[Tue Aug 28 00:17:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 00:17:54 2012] Counts = 130424.000000, rescaling region sizes by 3.000000
[Tue Aug 28 00:17:54 2012] XMMSAS src. selection expression = ellipse(26823.370360, 27760.323200, 1231.879256, 1231.879256, 0.000000, X, Y)
[Tue Aug 28 00:17:54 2012] Writing source region out to fullrun_pn_xmm0152780201_pi300-10000_pass1_cl_src3_src.reg
[Tue Aug 28 00:17:54 2012] Extracting stamp from image fullrun_pn_xmm0152780201_pi300-10000_cl_sm2.00.img.gz, (238, 249) - (380, 390)
[Tue Aug 28 00:17:54 2012] XMMSAS bgd. selection expression = annulus(26823.370360, 27760.323200, 6159.396280, 12318.792560, X, Y) && !ellipse(19107.034576, 22938.802063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24850.470947, 16759.058090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15772.401413, 39564.468079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19473.894577, 37247.957672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16857.193283, 37119.148926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27701.255554, 36824.164551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27824.480200, 35926.017400, 459.725613, 459.725613, 0.000000, X, Y) && !ellipse(38515.755402, 35695.628418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33368.412933, 35191.597656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30668.866760, 33231.657684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28340.456512, 33147.344574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28202.548600, 32325.908600, 358.452010, 358.452010, 0.000000, X, Y) && !ellipse(30838.054380, 31836.243400, 381.308011, 381.308011, 0.000000, X, Y) && !ellipse(26631.329193, 31456.945831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27492.809204, 31815.921722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25439.502460, 30756.077800, 279.888808, 279.888808, 0.000000, X, Y) && !ellipse(35671.701294, 30208.487335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27971.062286, 30037.256531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39689.044708, 29985.212646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.510651, 29698.920837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29266.013000, 29398.214874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28107.188293, 29234.832336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27628.008000, 29661.160000, 1308.136038, 1308.136038, 0.000000, X, Y) && !ellipse(26460.079803, 29001.572083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39341.997864, 28941.557800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25756.037720, 28956.582611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37029.284149, 28766.004608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25081.785065, 28792.292053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16502.352600, 28749.787689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29000.305634, 28411.961761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39293.018900, 28376.070200, 389.100011, 389.100011, 0.000000, X, Y) && !ellipse(30370.152069, 27859.304138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29835.976105, 27352.039551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30659.029877, 26743.230713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.997345, 26424.959076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23521.379211, 26299.774445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29829.957153, 26740.185394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25662.250800, 26631.944000, 383.940811, 383.940811, 0.000000, X, Y) && !ellipse(28420.880005, 26064.156525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26267.258301, 26136.184814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29675.296387, 25518.327637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27107.180180, 25571.910000, 878.288025, 878.288025, 0.000000, X, Y) && !ellipse(20464.363876, 25186.042755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27210.721200, 24923.086000, 560.546416, 560.546416, 0.000000, X, Y) && !ellipse(28834.568000, 25164.196000, 348.264810, 348.264810, 0.000000, X, Y) && !ellipse(28294.681152, 24580.465088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27262.302340, 24415.526000, 760.812822, 760.812822, 0.000000, X, Y) && !ellipse(26434.251678, 24320.704987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28205.488098, 24140.184235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36812.819611, 23484.798218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26891.698000, 23417.836000, 1518.672044, 1518.672044, 0.000000, X, Y) && !ellipse(27530.344000, 22572.278000, 759.336822, 759.336822, 0.000000, X, Y) && !ellipse(27580.760800, 22369.632000, 1079.984031, 1079.984031, 0.000000, X, Y) && !ellipse(37290.708954, 22134.946808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27662.762000, 21734.036000, 561.748816, 561.748816, 0.000000, X, Y) && !ellipse(35667.235535, 20799.824173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.976800, 21260.349500, 810.296023, 810.296023, 0.000000, X, Y) && !ellipse(26692.346600, 20705.052800, 505.185615, 505.185615, 0.000000, X, Y) && !ellipse(27890.785447, 19945.743629, 1551.168045, 444.550348, 78.466040, X, Y) && !ellipse(27914.909000, 19830.238800, 541.200816, 541.200816, 0.000000, X, Y) && !ellipse(27858.407200, 19742.203000, 1551.168045, 408.145612, 79.646900, X, Y) && !ellipse(28119.532640, 18428.950400, 1551.168045, 392.696811, 82.696270, X, Y) && !ellipse(32335.441925, 17932.762909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.481049, 17693.520874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28370.637600, 16544.810400, 837.392024, 837.392024, 0.000000, X, Y) && !ellipse(32645.063477, 16843.152161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28398.965200, 16306.343600, 792.462423, 792.462423, 0.000000, X, Y) && !ellipse(28526.261000, 15273.683800, 906.656026, 906.656026, 0.000000, X, Y) && !ellipse(28624.226800, 14929.886000, 993.352029, 993.352029, 0.000000, X, Y)
[Tue Aug 28 00:17:54 2012] Writing fullrun_pn_xmm0152780201_pi300-10000_pass1_cl_src3.gif
[Tue Aug 28 00:24:50 2012] Mean detx,y = (96.93, -215.54) 
[Tue Aug 28 00:25:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 00:30:37 2012] grppha failed
[Tue Aug 28 00:30:38 2012] Setting source spectrum file to fullrun_pn_xmm0152780201_pi300-10000_pass1_cl_src3_src.pi.gz
[Tue Aug 28 00:30:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0152780201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Aug 28 02:16:43 2012] Updating aperture counts using extracted products
[Tue Aug 28 02:16:43 2012] Error reading totcts from fullrun_pn_xmm0152780201_pi300-10000_pass1_cl_src3_src.pi.gz
[Tue Aug 28 02:16:44 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 02:16:49 2012] Source 3 has no response, skipping
[Tue Aug 28 02:16:50 2012] xmm0152780201/analysis//spectral/fullrun_pn_xmm0152780201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete